; Novell Client for Windows 95/98 File ; Novell Client INI File ; ;VeRsIoN=v3.32 Novell Client Install - Configuration INI ;CoPyRiGhT=copyright 1996-2002, by Novell, Inc. All rights reserved. ; ;SourceDir is relative to where setup.exe was launched ;DestDir is relative to the 'Windows' directory [English Sections] 1=English INF Section 2=English DLL Section 3=English Help Section [English INF Section] SourceDir=. DestDir=INF FileNames=INF Files DelFiles=INF Del Files [English DLL Section] SourceDir=. DestDir=System FileNames=DLL Files [English Help Section] SourceDir=. DestDir=..\novell\client32 FileNames=Help Files [INF Files] 1=NWClient.inf 2=NWTrans.inf 3=NWLAYOUT.inf 4=NWSERV.inf 5=NWNDPS.INF 6=NWCMD.INF 7=NWWSMGR.INF 8=ADSNNDS.INF 9=NWRMGR.INF 10=ZENIS.INF [INF Del Files] 1=PCNTNW.INF 2=NE15_21.INF 3=E100B.INF 4=ODINSUP.inf 5=NE3200.inf 6=NE2000.inf 7=NEAMD.inf 8=NE2.inf 9=NE2_32.inf 10=NTR2000.inf 11=NE1000.inf 12=82557.INF 13=OCTOK162.INF 14=ODIMADGE.INF 15=LANSUP.INF 16=TRXNET.INF 17=ODI3C589.INF 18=3C59X.INF 19=A2560.INF 20=ACCODI.INF 21=CPQWIN95.INF 22=DC21X4.INF 23=SMC8000.INF 24=E100S.INF 25=EPRO.INF 26=HPTX.INF 27=NE100.INF 28=NE100SP.INF 29=NWDLKPCI.INF 30=OCE3XODI.INF 31=OCE4XODI.INF 32=ODI3COM.INF 33=ODICMDG.INF 34=ODIHPBM.INF 35=ODIHPSL.INF 36=ODISKFP.INF 37=PCNTNW.INF 38=SMCPWR.INF 39=3C90X.INF 40=E22N4X.INF 41=ODIDE43X.INF 42=ODIDE450.INF 43=ODIDE500.INF 44=ODIDEFEA.INF 45=ODIDEFPA.INF 46=OCE2XODI.INF 47=E10P.INF 48=CPQTRPCI.INF 49=3CTOKEN.INF 50=ITOK162.INF 51=IBMTRPO.INF 52=IBMMPCO.INF 53=IBMFE.INF 54=CPQTRISA.INF 55=F70N4X.INF 56=CPQETHER.INF 57=CPQTOKEN.INF 58=ODI22X.INF 59=ODIEWRK3.INF 60=3C3X9.INF 61=ODISKFE.INF 62=ODISKFI.INF 63=ODISKFM.INF 64=ODISKTOK.INF 65=EX10.INF 66=IBMFEI.INF 67=NE100I.INF 68=IBMEANWS.INF 69=E100ISA.INF 70=EXP16.INF 71=TPRO.INF 72=KTC100.INF 73=KTC2000.INF 74=MADGEATM.INF 75=SMC9432.INF 76=TOKEN.INF 77=KTC20.INF 78=TR2K386.INF 79=KTC30.INF 80=MX100I.INF 81=3C5X9.INF 82=MTR32ODI.INF 83=IBMEINWS.INF 84=PNPCLNT.INF 85=MX100P.INF 86=MX10I.INF 87=EMPCI.INF 88=NLLAYOUT.INF 89=NWRCA.INF [DLL Files] 1=NWSetup.dll 2=NIOSLib.dll 3=NWWSINST.DLL 4=NWCCFG16.DLL 5=NWCCFG32.DLL 6=WMREG16.DLL 7=NWUNC32.DLL [Help Files] ;1=readme.hlp ;2=README.cnt ; The following section contains the current version of client software ; and is used for automated upgrade of clients. ; ; The version contains 4 fields. These are: ; ; MajorVersion.MinorVersion.Revision.Level ; ; The major version, minor version, and revision are ; fields supplied by Novell, and refer to the version ; of the client software. These will be updated with ; each new version of the Novell Client. ; ; The level, on the other hand, is a customer/installation ; defined field. It is initially set to 0 by Novell, ; but may be set to any number that is desired by the ; system administrator. This may be used to cause updates ; when the Novell Client software did not actually change, ; but when some other change was made that is desired by ; the system administrator. This field may range from ; 0 to 65000. ; ; The upgrade will take place if any part of the verion ; number is greater than that stored in the registry. Thus ; 1.1.1.1 is greater than 1.1.1.0 and 1.1.2.0 is greater ; than 1.1.1.9999 [ClientVersion] Version=3.32.0.0 ; ACU Option ; The following section contains settings that will minimize user intervention ; during the automated upgrade of clients. ; ; DisplayFirstScreen ; Setting this to YES will prompt the user whether they wish to continue or cancel ; the automated upgrade. ; ; DisplayLastScreen ; Setting this to YES will prompt the user whether they wish to reboot for the ; changes to take effect or not. [AcuOptions] DisplayFirstScreen=NO DisplayLastScreen=NO ; Primary Network Logon : The following setting is used to determine if the Primary Network Logon in the ; Network Control Panel will be updated. ; Update=YES will cause the update to be performed. ; Update=NO will cause the update to be skipped. [PrimaryNetworkLogon] Update=YES [ProtocolOptions] DefaultProtocol=IP,IPX ; Default Protocol used by the client ;DefaultProtocol = IP,IPX will cause the client to use IP and IPX ;DefaultProtocol = IPNOCM will cause the client to use IP ;DefaultProtocol = IP will cause the client to use IP with IPX compatibility ;DefaultProtocol = IPX will cause the client to use IPX ; Protocol Detection : The following setting is used to determine if install should detect and use the ; previous client protocol option. Detecting the previous protocol option will ; override the DefaultProtocol in the [ProtocolOptions] section. ; DetectPreviousProtocol=YES will cause the protocol detection to be performed. ; DetectPreviousProtocol=NO will cause the protocol detection to be skipped. [ProtocolDetection] DetectPreviousProtocol=YES ; Device IDs that are incompatible with the NetWare 32-bit client ; These are removed and not allowed to be re-added, ; during installation of the client-32 [IncompatibleDeviceIDs] 1=NETWARE3 2=NETWARE4 3=IPXMONO 4=IPXODI 5=NWREDIR 6=NWREDIR4 7=NWSERVER 8=NOVELLIPX32 9=NWIP 10=NWIPXIP 11=NWSNMP 12=NWNMS 13=NWNMR 14=NWTSA 15=NWCMD 16=NWWSMGR 17=NWLINK ; Device IDs that are added as part of the NetWare 32-bit client [DeviceIDAddOrder] 1=NOVELL32 ; Determines the order in which device IDs are removed before adding ; the NetWare client. Some of these will be added back automatically [DeviceIDDeleteOrder] ;1=NWLINK 2=NETWARE3 3=NETWARE4 4=NOVELLIPX32 5=NOVELL32 6=NWIP 7=NWSNMP 8=NWNMR 9=NWNMS 10=NWREDIR 11=IPXODI 12=IPXMONO 13=*PNP8ffd 14=NWTSA 15=NWIPXIP 16=NWNDPS 17=NWCMD 18=NWWSMGR 19=NWRMGR [Install Checks] DiskSpaceRequirement = 14351495 NWIP = 70732 NWSNMP = 86683 NWNMR = 11464 NWNMS = 25582 NWTSA = 389557 NWNDPS = 1384853 NWWSMGR = 3515931 NWRMGR = 1613954 ZENIS = 112096 ADSNNDS = 3935 NWCMD = 62756 ;NWRCA = 621056 NWIPXIP = 400156 [FixInfSection] 1=NET_NDIS2.add 2=NET_NOTPRIMARY.add 3=NET_ANYNET.Add [Delete DeviceID] 1=NWIP 2=NWSNMP 3=NWNMR 4=NWNMS 5=NWTSA 6=NWIPXIP 7=NWNDPS 8=NWWSMGR 9=NOVELL32 10=NOVELLIPX32 [Delete Application] 1=NDS Provider 2=Novell Dialup Services 3=Novell Remote management Agent 4=Novell Remote Management [Terminate Application] 1=W95TSA 2=ZENRC32 ;5=SNMPIPX ;6=SNMPUDP ;7=WM95 ;8=DPMW32 ; Incompatible Protocol flags are: ; 0 = NONE ; 1 = IP only ; 2 = IP with IPX Compatibility ; 4 = IP and IPX ; 8 = IPX ; ; 3 = IP only, IP with IPX Compatibility ; 5 = IP only, IP and IPX ; 6 = IP with IPX Compatibility, IP and IPX ; 7 = IP only, IP with IPX Compatibility, IP and IPX ; 9 = IP only, IPX ; 10= IP with IPX Compatibility, IPX ; 11= IP only, IP with IPX Compatibility, IPX ; 12= IP and IPX, IPX ; 13= IP only, IP and IPX, IPX ; 14= IP with IPX Compatibility, IP and IPX, IPX ; 15= IP only, IP with IPX Compatibility, IP and IPX, IPX [PossibleInstallList] 1=NWWSMGR,nwwsmgr.inf,0,0,0 2=NWRMGR,nwrmgr.inf,1,0,0 3=ZENIS,zenis.inf,1,0,0 4=NWNDPS,nwndps.inf,0,0,0 5=NWSNMP,nwserv.inf,0,0,1 6=NWNMS,nwserv.inf,0,0,1 7=NWNMR,nwserv.inf,0,1,0 8=NWTSA,nwserv.inf,0,0,1 9=ADSNNDS,adsnnds.inf,1,0,0 [DeviceInstallList] [RollBackSystemFiles] 1=autoexec.bat,24 2=config.sys,24 3=system.dat,10 4=system.ini,10 [Client.Run] 1=WS2NSINS.EXE /install,>=,1998 2=WS2SETUP.EXE,<,1998 3=AXDIST.EXE,<,1111 [Winsock2.Install] VendorInstallDll=NWWSINST.DLL [NWRCA] 1=Newlinks,24,novell\client32\install\newlinks.exe [NWRCA.key] CurrentlyInstalledRegKey=NETWORK\Novell\System Config\Install\Apps\NWRCA [NWRMGR.key] CurrentlyInstalledRegKey=NETWORK\Novell\System Config\Install\Apps\NWRMGR [NWRMGR.Run] 1=RM\RMSETUP.EXE /noservicestart /noreboot ;[NWRMGR.Uninstall.Run] ; Used to uninstall RM during installation (installed later if option was checked) ;1=RM\RMSETUP.EXE /uninstall /noreboot [ZENIS.key] CurrentlyInstalledRegKey=NETWORK\Novell\System Config\Install\Apps\ZENIS [ADSNNDS.key] CurrentlyInstalledRegKey=NETWORK\Novell\System Config\Install\Apps\ADSNNDSDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.