FLASH UPDATE UTILITY version 2.1 for PCI QUAD/DUAL SCSI
CHANGES: Added AWS support to Bios Config Utility - 5/19/97
Added Fix for P8/PQS Parity Error Problem - 8/10/97
To update the BIOS Config Utility execute the following command line:
flash875 -n bconf_21.rom
To update the FPGA Code execute the following command line:
flash875 -n pqs2922.pga
To verify that the proper versions are now in FLASH, execute the following:
flash875 -V
The current versions are:
NCR PCI SCSI Flash Utility.....Version 2.00
BIOS Version: 2.10
FPGA Memory Controller Version: September 22, 1996
After updating the FLASH the machine must be power cycled for the
changes to take effect.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.