README.TXT Driver File Contents (Ga-h01.zip)

   Windows NT 4.0

   Introduction:
   -------------
   This document describes the procedure to install Windows NT v4.0
   driver for PCMCIA 10/100M Fast Ethernet Card.

   Location of Driver:     \WINNT40\AX88190.SYS

   Installing driver procedure on Microsoft Windows NT :
   -----------------------------------------------------
   1.  Start Windows NT 4.0, then click the Start button.

   2.  Open the Settings menu and select Control Panel.

   3.  Double-click the Network icon.

   4.  If you have previously installed a network adapter on the computer:
       - Click Adapters in the Network window
       - Click Add
       If you have not installed a network adapter on the computer:
       - Click Yes in the Network Configuration dialog box
       - Select Wired to the Network in the Network Setup Wizard window
       - Click Next to continue
       - Click the Select from list button

   5.  Click the Have Disk button in the Select Network Adapter window.
       The Insert Disk window appears.

   6.  Insert the Driver Disk into the CD-ROM drive.

   7.  At the prompt, type the following:
	  E:\PCMCIA\WINNT40

   8.  Click OK.
       Windows NT will perform the "Bindings Configuration" process. If any
       additional network software options were installed, you may be
       prompted for specific information for these packages.

   9. Complete the installation by following the instructions provided by
       Windows NT.

   10. Restart the computer.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 1.65