Windows 95
Introduction:
-------------
This document describes the procedure to install Windows 95 driver
for the PCMCIA 10/100M Fast Ethernet Card.
Location of Driver: \WIN95\AX88190.SYS
Installing driver procedure on Microsoft Windows 95 :
-----------------------------------------------------
Windows 95 is an operating system with the so-called Super-Client
driver for PCMCIA cards. This means Windows 95 is with the features
supported by Socket/Card services driver for PCMCIA cards. If Windows
95 is installed in a notebook with a PCMCIA card reader, the PCMCIA
driver should be installed simultaneously as Windows 95 is installed.
You don't need to install the PCMCIA driver again. However, if you
have not installed PCMCIA driver in Windows 95 yet, you must install
PCMCIA driver first. After installing PCMCIA driver, you should
install Ethernet driver according to the prompt of Windows 95. The
following give the brief procedures to install PCMCIA driver and
Ethernet driver on Windows 95. If you have installed a PCMCIA driver,
please skip step 1 - 4 and jump to step 5 directly.
1. When log into Windows 95, click the "My Computer" icon to open
"My Computer" window, then click the "Control Panel" icon from
"My Computer" window.
2. In the "Control Panel" window, click the "Add New Hardware" icon.
A "Add New Hardware Wizard" window will appear and ask you if it
will continue to auto-detect a new hardware. If you press "Next"
button to confirm to auto-detect a new hardware, the Windows 95
will detect all hardwares installed in the system. It will take
a few minutes to detect all hardwares in the system.
3. Windows 95 will list all hardwares it found. Choose "PCMCIA
controller" from the hardware list and click "Finish" button to
install PCMCIA driver.
4. Reboot your computer after installing PCMCIA driver.
5. Plug PCMCIA Ethernet card into a PCMCIA card reader before Windows
95 starts up. The system will prompt you "New Hardware Found" and
ask you to install driver. Choose "Driver From Disk Provided by
Hardware Manufacturer" and confirm to install driver. A "Install
From Disk" window will appear and ask you to enter the path of
driver, key-in or select your driver path to "Copy Manufacturer's
file from:" window and then confirm. This will install the PCMCIA
10/100M Fast Ethernet driver to Windows 95 system.
6. Reboot your computer after installing the PCMCIA Ethernet driver.
Open "Network Neighborhood" window and you will acquire network
service.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.