Windows 2000 Introduction: ------------- This document describes the procedure to install Windows 2000 for PCMCIA 10/100Mb Fast Ethernet card driver. Location of Windows 2000 Driver : \win2000\AX88190.SYS Installing driver procedure on Microsoft Windows2000 : ------------------------------------------------------------------- Before you start with the installation process, make sure that your adapter should be properly installed in your PCMCIA slot. Executing Windows2000, it will auto-detect your system configuration and find the adapter hardware. ( If Windows2000 does not prompt that it detects the PCMCIA FastEthernet adapter, there must be something wrong with the PCMCIA FastEthernet adapter or your system enviroment.) 1. Ask you to select which driver you want to install, select "Driver from disk provided by hardware manufacturer". 2. Insert the PCMCIA 10/100 Fast Ethernet driver disk into drive A and specify the setup file pathname A:\WIN2000 (for Windows 2000) . 3. Windows2000 will appear some messages to insert Windows2000 system disk to complete setup step. 4. Windows2000 will finish the other installation procedure automatically, then you restart the system.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.