1. Ga-h01.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (Ga-h01.zip)

   Workstation for DOS ODI Client

   Introduction:
   -------------
   This document describes the procedure to setup the NetWare v3.X , v4.X
   workstation  driver for the PCMCIA 10/100M Fast Ethernet adapter.

   You must run Socket/Card services device driver and/or Enable  program
   before you invoke any Ethernet driver. For the detailed information on
   how to insatll PCMCIA driver, please refer to the User's Manual or the
   "About PCMCIA" section in README file.

   Location of Driver:     \NETWARE\DOSODI\AX88190.COM


   Sample Configuration Files:
   ---------------------------
      STARTNET.BAT:
         EN190
         LSL
         AX88190
         IPXODI
         NETX or VLM (VLM's for NetWare 4.X )

      NET.CFG

         Link Support

         Protocol
           Bind AX88190

         LINK DRIVER AX88190
         ; NODE ADDRESS 2A8012345678
         ; Frame   Ethernet_802.3
         Port 300
         IRQ 5
;        S10
;        S100

         NetWare DOS Requester
           FIRST NETWORK DRIVE = F
           NETWARE PROTOCOL = NDS BIND

   Auto-Installation Procedures for NetWare Client :
   -----------------------------------------------
      Before you start the installation process, make sure that the
      adapter is properly installed and configured.  Make sure that
      your NetWare workstation operating system is properly installed.

      1. Run INSTODI.BAT  from the driver  which  has  this  installation
         diskette.

      2. Select the ODI environment(VLM or NETX).

      3. The installation program will copy all required files to C:\NWNET
         directory and create NET.CFG and STARTNET.BAT files.

      4. The installation program will modify CONFIG.SYS file to add
         "LASTDRIVE=drive" statement upon your confirmation and modify
         NET.CFG and STARTNET.BAT files under C:\NWNET directory to meet
         your ODI environment.

      5. Reboot your system for the configuration to take effect if you
         select VLM environment in step 2.

      6. Change directory to C:\NWNET then run STARTNET.BAT,  you will
         connect to the file server.

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.