AX88190.INF Driver File Contents (Ga-h01.zip)

; NE2000.INF
;
; Novell NE2000 Network Interface Cards.
;
; VeRsIoN=1.07 Novell Windows 95 INF file: Novell Ethernet NE2000.
; CoPyRiGhT=(c) Copyright 1996, 1997, 1998, by Novell, Inc. All rights reserved.

[version]
InfVersion=00.01.07
signature="$CHICAGO$"
Class=Net
provider=%V_N%
Layoutfile=nllayout.inf

;****************************************************************************
;       Manufacturer Section
;****************************************************************************
[Manufacturer]
%V_ASIX%=ASIX

;****************************************************************************
;       Manufacturer Name Section
;****************************************************************************
[ASIX]
%AX88190.DeviceDesc%=AX88190.Ndi, PCMCIA\ASIX-AX88190-A4F6

;****************************************************************************
;       INF INSTALL SECTION
;****************************************************************************
;****************************************************************************
;    PCMCIA.00A4.0002  NOVELL AX88190 ETHERNET (PCMCIA)
;****************************************************************************
[AX88190.Ndi]
AddReg=AX88190.Ndi.reg, NE2000.Ndi.reg, SLOT.reg, pcNE2000.params.reg, ODI.Common.CFG.reg

;****************************************************************************
;       .REG (Device IDs)
;****************************************************************************
[AX88190.Ndi.reg]
HKR,Ndi,DeviceID,,"PCMCIA\ASIX-AX88190-A4F6"
HKR,Ndi,CardType,,"PCMCIA"

;****************************************************************************
;       .REG Common Settings for all NE2000 drivers
;****************************************************************************
[NE2000.Ndi.reg]
; key,subkey,valuname,type,value
HKR,,DevLoader,,*odiload
HKR,,EnumPropPages,,"netdi.dll,EnumPropPages"

; Ndi section
HKR,Ndi,NdiInstaller,,"odipage.dll,odiNdiproc"

; Interfaces
HKR,Ndi\Interfaces,DefUpper,,"odinsup,NovellODI32"
HKR,Ndi\Interfaces,UpperRange,,"odinsup,NovellODI32"
HKR,Ndi\Interfaces,DefLower,,"ethernet"
HKR,Ndi\Interfaces,LowerRange,,"ethernet"

; Install section
HKR,Ndi\Install,"32 Bit",,"NE2000.ODI32.Install"

; ODI 32 Bit Info
HKR,"ODI\32 Bit",ModulePath,,"%24%%DRIVER_32_PATH%"
HKR,"ODI\32 Bit",Modules,,"LSLC32.NLM,CMSM.NLM,ETHERTSM.NLM"
HKR,"ODI\32 Bit",DriverPath,,"%24%%DRIVER_32_PATH%"
HKR,"ODI\32 Bit",FileName,,"CNE2000.lan"

;****************************************************************************
;       .LogConfig Sections
;****************************************************************************

;****************************************************************************
;       Install Section
;****************************************************************************
[NE2000.ODI32.Install]
CopyFiles=NE2000.ODI32.CopyFiles, NE2000.ODI32MSG.CopyFiles
UpdateAutoBat=NE2000.ODI32.autobat

[NE2000.ODI32.autobat]
CmdDelete=LSL
CmdDelete=N16ODI
CmdDelete=NESL
CmdDelete=NE2000
CmdDelete=ODIHLP

;****************************************************************************
;       Remove Section
;****************************************************************************

;****************************************************************************
;Common Params
;****************************************************************************
[NE2000.params.reg]
; Resources
HKR,,IRQ,1,04,00,00,00
HKR,Ndi\params\IRQ,resc,1,04,00,00,00
HKR,Ndi\params\IRQ,ParamDesc,,"IRQ Level"
HKR,Ndi\params\IRQ,flag,1,60,00,00,00

HKR,,Port,1,02,00,00,00
HKR,Ndi\params\Port,resc,1,02,00,00,00
HKR,Ndi\params\Port,ParamDesc,,"I/O Port Address"
HKR,Ndi\params\Port,flag,1,20,00,00,00

;****************************************************************************
; Additional settings for PCMCIA NE2000 Drivers
;****************************************************************************
[pcNE2000.params.reg]
; Resources
HKR,,IRQ,1,04,00,00,00
HKR,,Port,1,02,00,00,00
HKR,,AttributeBase,1,01,00,00,00

; OVERRIDE FOR 16K RAM WINDOW
HKR,Override,0000,1,\
;
00,04,00,00, \      ; CONFIGMG_VERSION
00,00,00,00, \      ; PRIORITY
;
; I/O Resource Descriptor
;
24,00,00,00, \      ; Total length of I/O Resource Descriptor
02,00,00,00, \      ; ResType_IO = 0x00000002
01,00, \            ; IOD_Count;
0C,00, \            ; IOD_Type;         // IOType_Range = 0x000C
00,00, \            ; IOD_Alloc_Base;
00,00, \            ; IOD_Alloc_End;
00,00, \            ; IOD_DesFlags;
00, \               ; IOD_Alloc_Alias;
00, \               ; IOD_Alloc_Decode;
E0,FF, \            ; IOR_Align;        // Mask for base alignment
20,00, \            ; IOR_nPorts;       // Number of ports
00,00, \            ; IOR_Min;          // Min port address
FF,FF, \            ; IOR_Max;          // Max port address
00,00, \            ; IOR_RangeFlags;   // Flags
00, \               ; IOR_Alias;        // Alias offset
00, \               ; IOR_Decode;       // Address specified
45,00,00,00, \      ; PCCARD flags, 0x40 = 16-bit port
;
; IRQ Resource Descriptor
;
14,00,00,00, \      ; Total length of IRQ Resource Descriptor
04,00,00,00, \      ; ResType_IRQ = 0x00000004
00,00, \            ; IRQD_Flags;
00,00, \            ; IRQD_Alloc_Num;   // Allocated IRQ number
FF,FF, \            ; IRQD_Req_Mask;    // Mask of possible IRQs
00,00, \            ; IRQD_Reserved;
70,00,00,00, \      ; PCCARD flags, 0x20 = Level mode interrupts
;
; Memory Resource Descriptor 0
;
34,00,00,00, \      ; Total length of Memory Resource Descriptor
01,00,00,00, \      ; ResType_Mem = 0x00000001
01,00, \            ; MD_Count;
14,00, \            ; MD_Type;          // MType_Range = 0x0014
00,00,00,00, \      ; MD_Alloc_Base;
00,00,00,00, \      ; MD_Alloc_End;
00,00, \            ; MD_Flags;
00,00, \            ; MD_Reserved;
00,F0,FF,FF, \      ; MR_Align;         // Mask for base alignment
00,10,00,00, \      ; MR_nBytes;        // Count of bytes (4K)
00,00,00,00, \      ; MR_Min;      // Min Address
FF,FF,FF,FF, \      ; MR_Max;      // Max Address
00,00, \            ; MR_Flags;         // Flags
00,00, \            ; MR_Reserved;
02,00,00,00, \      ; PCCARD flags, 0x02 = attribute mem, or
                    ;         0x08 = 16-bit common mem
00,00,00,00, \      ; Memory card address
;
; Memory Resource Descriptor 1
;
34,00,00,00, \      ; Total length of Memory Resource Descriptor
01,00,00,00, \      ; ResType_Mem = 0x00000001
01,00, \            ; MD_Count;
14,00, \            ; MD_Type;          // MType_Range = 0x0014
00,00,00,00, \      ; MD_Alloc_Base;
00,00,00,00, \      ; MD_Alloc_End;
00,00, \            ; MD_Flags;
00,00, \            ; MD_Reserved;
00,C0,FF,FF, \      ; MR_Align;         // Mask for base alignment
00,40,00,00, \      ; MR_nBytes;        // Count of bytes (4K)
00,00,00,00, \      ; MR_Min;      // Min Address
FF,FF,FF,FF, \      ; MR_Max;      // Max Address
00,00, \            ; MR_Flags;         // Flags
00,00, \            ; MR_Reserved;
08,00,00,00, \      ; PCCARD flags, 0x02 = attribute mem, or
                    ;         0x08 = 16-bit common mem
00,10,01,00, \      ; Memory card address
;
; REQUEST_CONFIG_PKT Descriptor
;
19,00,00,00, \      ; Total length of REQUEST_CONFIG_PKT Descriptor
7C,89,00,00, \      ; (ResType_Ignored_Bit + PCCARD_DEVICE_ID) = 0x897C
00,00, \            ; Socket;
02,00, \            ; Attributes;
32, \               ; Vcc;
32, \               ; Vpp1;
32, \               ; Vpp2;
02, \               ; IntType;
00,00,02,00, \      ; ConfigBase;
00, \               ; Status;
00, \               ; Pin;
00, \               ; Copy;
01, \               ; ConfigIndex;
0B, \               ; Present;
;
00,00,00,00         ; TERMINATOR


;***********************************************************************

;****************************************************************************
;       general Ethernet Frame-Type params
;****************************************************************************
[ODI.Common.CFG.reg]
; First Logical Board
HKR,Ndi\params\Frame1,ParamDesc,,"1. Frame Type"
HKR,Ndi\params\Frame1,default,,1
HKR,Ndi\params\Frame1,type,,enum
HKR,Ndi\params\Frame1,optional,,0
HKR,Ndi\params\Frame1\enum,1,,"Ethernet_802.2"
HKR,Ndi\params\Frame1\enum,2,,"Ethernet_SNAP"
HKR,Ndi\params\Frame1\enum,3,,"Ethernet_II"
HKR,Ndi\params\Frame1\enum,4,,"Ethernet_802.3"

; Second Logical Board
HKR,Ndi\params\Frame2,ParamDesc,,"2. Frame Type"
HKR,Ndi\params\Frame2,default,,2
HKR,Ndi\params\Frame2,type,,enum
HKR,Ndi\params\Frame2,optional,,0
HKR,Ndi\params\Frame2\enum,1,,"Ethernet_802.2"
HKR,Ndi\params\Frame2\enum,2,,"Ethernet_SNAP"
HKR,Ndi\params\Frame2\enum,3,,"Ethernet_II"
HKR,Ndi\params\Frame2\enum,4,,"Ethernet_802.3"
HKR,Ndi\params\Frame2\enum,5,,"Not used"

; Third Logical Board
HKR,Ndi\params\Frame3,ParamDesc,,"3. Frame Type"
HKR,Ndi\params\Frame3,default,,3
HKR,Ndi\params\Frame3,type,,enum
HKR,Ndi\params\Frame3,optional,,0
HKR,Ndi\params\Frame3\enum,1,,"Ethernet_802.2"
HKR,Ndi\params\Frame3\enum,2,,"Ethernet_SNAP"
HKR,Ndi\params\Frame3\enum,3,,"Ethernet_II"
HKR,Ndi\params\Frame3\enum,4,,"Ethernet_802.3"
HKR,Ndi\params\Frame3\enum,5,,"Not used"

; Fourth Logical Board
HKR,Ndi\params\Frame4,ParamDesc,,"4. Frame Type"
HKR,Ndi\params\Frame4,default,,4
HKR,Ndi\params\Frame4,type,,enum
HKR,Ndi\params\Frame4,optional,,0
HKR,Ndi\params\Frame4\enum,1,,"Ethernet_802.2"
HKR,Ndi\params\Frame4\enum,2,,"Ethernet_SNAP"
HKR,Ndi\params\Frame4\enum,3,,"Ethernet_II"
HKR,Ndi\params\Frame4\enum,4,,"Ethernet_802.3"
HKR,Ndi\params\Frame4\enum,5,,"Not used"

; Node Address Override
HKR,Ndi\params\"Node Address",ParamDesc,,"Node Address Override"
HKR,Ndi\params\"Node Address",type,,edit
HKR,Ndi\params\"Node Address",LimitText,,18
HKR,Ndi\params\"Node Address",UpperCase,,1
HKR,Ndi\params\"Node Address",default,,""
HKR,Ndi\params\"Node Address",flag,1,20,00,00,00
HKR,Ndi\params\"Node Address",optional,,1

; Help section
HKR,Ndi,HelpText,,%ODIMLID_HELP%

[ISA.params.reg]
; Adapter ISA FOR isa BUS CARD
HKR,Ndi\params\ISA,ParamDesc,,"ISA"
HKR,Ndi\params\ISA,type,,keyonly
HKR,Ndi\params\ISA,optional,,0

[SLOT.reg]
; Adapter Slot Number
HKR,Ndi\params\Slot,ParamDesc,,"Adapter Slot Number"
HKR,Ndi\params\Slot,type,,int
HKR,Ndi\params\Slot,default,,1
HKR,Ndi\params\Slot,min,,1
HKR,Ndi\params\Slot,max,,65535
HKR,Ndi\params\Slot,step,,1
HKR,Ndi\params\Slot,optional,,1
HKR,Ndi\params\Slot,HIN,,""

;****************************************************************************
; File to be copied
;****************************************************************************
[NE2000.ODI32.CopyFiles]
CNE2000.LAN,,,5

[NE2000.ODI32MSG.CopyFiles]
CNE2000.MSG,,,5

;****************************************************************************
; Source Disk Names & Source Disk Files
;****************************************************************************

;****************************************************************************
; Destination Directories
;****************************************************************************
[DestinatioNdirs]
DefaultDestDir               =11 ; LDID_SYS
NE2000.ODI32.CopyFiles       =24,novell\client32
NE2000.ODI32MSG.CopyFiles    =24,novell\client32\nls\english

;****************************************************************************
; Localizable Strings
;****************************************************************************
[strings]
; Provider
V_N=" Novell"

; Manufacturers
V_Novell="Novell"
V_Novell2="Novell/Anthem"
V_IBM="IBM"
V_Artisoft="Artisoft Corporation"
V_NATIONAL="National Semiconductor"

;Paths to drivers
DRIVER_32_PATH="novell\client32\"

; Novell PNP Devices
*pnp80d4.DeviceDesc="Novell NE2000"
*pnp80d6.DeviceDesc="NE2000 Compatible"
*pnp80d9.DeviceDesc="Novell NE2000 Plus"
;AX88190.DeviceDesc="Novell AX88190 PCMCIA Ethernet"
AX88190.DeviceDesc="PCMCIA 10/100M Fast Ethernet Card"

; Novell/Anthem
*pnp80d4.DeviceDesc2="Novell/Anthem NE2000"
*pnp80d9.DeviceDesc2="NE2000 Plus"
*pnp80d9.DeviceDesc3="NE2000 Plus Programmed I/O mode"

; IBM
*IBM2.DeviceDesc="IBM Ethernet Credit Card Adapter II"

; pnp National Semiconductor
NAX88190.DeviceDesc="National AX88190 Infomover or compatible"

; Artisoft PNP Devices
*pnp8138.DeviceDesc="Artisoft AE-2 or AE-3"

; Context help
ODIMLID_HELP="The Novell ODI driver enables you to use 32-Bit networking components."

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.01