HPQDS.ini Driver File Contents (Pavilion_ZE5500.zip)

; "{537E6C71-652D-11d1-AD2A-00A024BD20B2}"

;--------------------------------------------------------------------
; HPQ - common
;   settings used for all HPQ mobile platforms

; Driver defaults
HKLM\System\CurrentControlSet\Services\SynTP\Parameters
  DetectMethod = REG_DWORD 0       ; WinXP interrupt commmunication
  DetectMethodWin2K = REG_DWORD 1  ; Win2K polling communication
  PollForDeviceRemoval = REG_DWORD 1
  OEMVendorNameENum = REG_DWORD 1
  ForceThreeButtonOnError = REG_DWORD 1

HKLM\Software\Synaptics\SynTP\Defaults
  DisableTouchPadIfMousePresent = REG_DWORD 1
  EdgeMotion = REG_DWORD 0
  Gestures = REG_DWORD 0
  FingerUpThreshold = REG_DWORD 18
  FingerUpTapHoldoff = REG_DWORD 2

; Turn off tip of the day
HKLM\Software\Synaptics\SynTPEnh
  ForceNoTips = REG_DWORD 1

; Configuration Restrictions
HKLM\Software\Synaptics\SynTP\Configurable
  DisableTouchPadIfMousePresent = REG_DWORD 0
  
HKLM\Software\Synaptics\SynTPPlugIns\SynTP\7
  NameMode = REG_DWORD 1

HKLM\Software\Synaptics\SynTPPlugIns\SynTP\8
  NameMode = REG_DWORD 1

; Mouse control panel defaults
HKCU\Control Panel\Mouse
  MouseThreshold1 = 10
  MouseThreshold2 = 0
  MouseSpeed = 1

; Disable Tray Icon
HKCU\Software\Synaptics\SynTPEnh
  TrayIcon = REG_DWORD 0

HKLM\Software\Synaptics\SynTPEnh
  TrayIcon = REG_DWORD 0

HKLM\Software\Synaptics\SynTP
  UseXtdPhoenixInfo = REG_DWORD 0
  RetryTimeoutsDuringDectection = REG_DWORD 0

; Use old Phoenix detection
HKLM\System\CurrentControlSet\Services\SynTP\Parameters
  UseXtdPhoenixInfo = REG_DWORD 0

HKLM\SOFTWARE\Synaptics\SynTPCpl
  UIStyle = REG_DWORD 0x00000002
  DisableHandedSelector = REG_DWORD 0x00000000

HKLM\Software\Synaptics\SynTPEnh\PopupConfig
  TrayIconHelp = REG_DWORD 0

; The following six entries will turn off PtS on stick devices
HKLM\Software\Synaptics\SynTP\Stick
  Gestures = REG_DWORD 2

HKLM\Software\Synaptics\SynTP\StickUnknown
  Gestures = REG_DWORD 2

HKLM\Software\Synaptics\SynTP\StickPS2
  Gestures = REG_DWORD 2

HKLM\Software\Synaptics\SynTP\StickUnknownPS2
  Gestures = REG_DWORD 2

HKLM\Software\Synaptics\SynTP\Styk
  Gestures = REG_DWORD 2

HKLM\Software\Synaptics\SynTP\StykPS2
  Gestures = REG_DWORD 2

HKLM\Software\Synaptics\SynTP\Defaults
  EnableButtonAction = REG_DWORD 0x00000001
  ExButton1Action = REG_DWORD 0x00000000
  ExButton2Action = REG_DWORD 0x00000000
  ExButton3Action = REG_DWORD 0x00000000
  ExButton4Action = REG_DWORD 0x00000000
  ExButton1PlugInID = SynTP
  ExButton2PlugInID = SynTP
  ExButton3PlugInID = SynTP
  ExButton4PlugInID = SynTP
  ExButton1PlugInActionID = REG_DWORD 0x00000007
  ExButton2PlugInActionID = REG_DWORD 0x00000008
  ExButton3PlugInActionID = REG_DWORD 0x00000009
  ExButton4PlugInActionID = REG_DWORD 0x0000000a

HKLM\Software\Synaptics\SynTPCpl\Touchpad
  ButtonEx1 = 0x1f,118,92,98,92,1231,107,81
  ButtonEx2 = 0x0f,118,156,186,156
  ButtonEx3 = 0x0f,73,124,53,124
  ButtonEx4 = 0x0f,163,124,231,124

; Honor the parity and overrun error indications from
; the KBC.  Normally these are ignored since a significant
; number of KBCs have spuriously generated these in the past.
; The Microsoft driver ignores these normally.
HKLM\SYSTEM\CurrentControlSet\Services\SynTP\Parameters
  IgnoreParity = REG_DWORD 0
  IgnoreOverrun = REG_DWORD 0

HKLM\Software\Synaptics\SynTP\Defaults
  BothButtonAction = REG_DWORD 1

;Properties dialog configuration
HKLM\SOFTWARE\Synaptics\SynTPCpl
  ShowResetButton = REG_DWORD 1

; Helps to alliviate the 'phantom mouse' advanced features
; dialog box from appearing when an external mouse is not plugged in
; Does not apply to Win9x
HKLM\System\CurrentControlSet\Services\i8042prt\Parameters
  MouseDataQueueSize = REG_DWORD 132

; Attempts to detect the buffer overflow in the i8042 driver by bit
; matching bytes in the packet
HKLM\System\CurrentControlSet\Services\SynTP\Parameters
  DiscardBogusRelativePackets = REG_DWORD 1

;--------------------------------------------------------------------
; HPQ - dedicated TP scroll
;   settings used for all HPQ mobile platforms with a dedicated
;   scroll area on the touchpad

; Make sure horizontal scrolling is on by default
HKLM\Software\Synaptics\SynTPCpl
  VSTPHorizDefault = REG_DWORD 1

HKLM\Software\Synaptics\SynTPEnh\ZoneConfig\Defaults\Vertical Scrolling
  ConfigFlags = REG_DWORD 1

HKLM\Software\Synaptics\SynTPEnh\ZoneConfig\Defaults\Horizontal Scrolling
  ConfigFlags = REG_DWORD 1

;--------------------------------------------------------------------
; HPQ - no dedicated TP scroll
;   settings used for all HPQ mobile platforms without a dedicated
;   scroll area on the touchpad

;HKLM\Software\Synaptics\SynTPEnh\ZoneConfig\Defaults\Vertical Scrolling
;  ConfigFlags = REG_DWORD 0

;HKLM\Software\Synaptics\SynTPEnh\ZoneConfig\Defaults\Horizontal Scrolling
;  ConfigFlags = REG_DWORD 0

HKLM\SOFTWARE\Synaptics\SynTPEnh\ZoneConfig\TouchPadVScrlTP\Vertical Scrolling
  LoXRel = REG_DWORD 0x00000158
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.87