README FILE
January 22, 1997
Iomega Adapter Support under Windows NT
Contents
Section # Topic
1 Installing Adapter Support under Windows NT
2 Driver Installation from the Iomega Install
Diskette
Under version 4.0
Under version 3.51
3 Installation for Native NT Adapter Drivers
Under version 4.0
Under version 3.51
_________________________________________________________
Section 1
Installing Adapter Support under Windows NT
If you are installing a new adapter, you MUST install the
adapter driver on your system BEFORE you can install ToolsNT
software to support your Iomega drive. If you are
installing a Jaz jet PCI adapter, Jaz Traveller, or parallel
port Zip drive, install the necessary Iomega driver from the
Windows NT Install diskette that came with the adapter or
drive (see Section 2 for instructions). For other Iomega
adapters, install the native NT driver support included with
Windows NT (see Section 3 for instructions). If you are
using a non-Iomega SCSI adapter, refer to your Windows NT
documentation for instructions on installing a SCSI adapter
or refer to the documentation that came with the adapter.
_________________________________________________________
Section 2
Driver Installation from the Iomega Install Diskette
The Iomega Install diskette for Windows NT that ships with
your Iomega drive or adapter includes software drivers for:
Iomega parallel port products (including Jaz Traveller
and the parallel port Zip drive)
Jaz jet PCI (PC/Mac model)
You can install either of these drivers using the following
procedures.
______________________________
Section 2.1
Iomega Driver Installation under Windows NT 4.0
1. Click Start, point to Settings, then click Control
Panel.
2. Double click "SCSI Adapters."
3. Select the "Drivers" tab and click the "Add" button.
4. Click "Have Disk" and insert the Iomega Install
diskette for Windows NT into the computer's floppy
drive.
5. Click "Browse" and select the drive letter for the
floppy drive.
6. Select the folder for the adapter you are installing
and click "Open," then click "OK."
7. When the list of Iomega adapters appears, highlight the
adapter you are using and click "Next" to continue.
8. Click "OK" for Windows NT to install the necessary
adapter drivers on your system.
9. Click "OK" to exit. Note that you need to reboot your
system for the new drivers to take effect.
______________________________
Section 2.2
Iomega Driver Installation under Windows NT 3.51
1. From the Windows NT Main icon, double-click on the
Windows NT Setup icon.
2. From the Setup window, choose the Options pull-down
menu, select "Add/Remove SCSI adapter," then click
"Add."
3. Scroll down the adapter list box and click on "Other."
4. Insert the Iomega Install diskette for Windows NT into
the computer's floppy drive.
5. Select the drive letter for the floppy drive and the
folder for the adapter you are installing, then click
"OK."
6. When the list of Iomega adapters appears, highlight the
adapter you are using and click "OK."
7. Click "Install." Windows NT will automatically copy
the driver files and add the driver to the list of
adapters found by the operating system.
8. Reboot your computer to configure the driver for your
system.
_________________________________________________________
Section 3
Installation for Native NT Adapter Drivers
Windows NT includes native driver support for the following
Iomega adapters:
Jaz jet ISA
Jaz jet (PC-only model)
Zip zoom
PC1600
______________________________
Section 3.1
Native Driver Installation under Windows NT 4.0
1. Click Start, point to Settings, then click Control
Panel.
2. Double click "SCSI Adapters."
3. Select the "Drivers" tab and click the "Add" button.
4. Select "Adaptec" from the list of manufacturers.
5. When the list of Adaptec SCSI Adapters displays, select
the driver needed for your adapter:
for Jaz jet ISA, Zip zoom, or PC1600,
click on "Adaptec AHA-152x/AHA-1510 SCSI Host
Adapter"
for Jaz jet (PC-only model),
click on "Adaptec AHA-294x/AHA-394x or AIC 78xx
PCI SCSI Controller"
6. Click "Next" to continue, then click "OK" for Windows NT
to install the necessary adapter drivers on your
system.
7. Click "OK" to exit. Note that you need to reboot your
system for the new drivers to take effect.
______________________________
Section 3.2
Native Driver Installation under Windows NT 3.51
1. From the Windows NT Main icon, double-click on the
Windows NT Setup icon.
2. From the Setup window, choose the Options pull-down
menu, select "Add/Remove SCSI adapter", then click Add.
3. Scroll down the adapter list box and click on the
driver needed for your adapter:
for Jaz jet ISA, Zip zoom, or PC1600,
click on "Adaptec 151x/152/AIC 6260/6360"
for Jaz jet (PC-only model),
click on "Adaptec 294x/AIC 78xx (PCI)"
4. Select "Install," and then choose "Current" in the next
dialogue box. The Adaptec driver for your adapter
should appear in the window listing adapters found by
Windows NT.
5. Reboot your computer to configure the driver for your
system.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.