[FONT] DEFAULT=Arial,11,ANSI [TITLE] ADDPORT=Add SC-Print AL Port Wizard CONFIG=Configure Port SEARCH=Searching Printer BROADCAST=Configuration of Broadcast Address ABOUT=About ERROR=SC-Print AL Error Message [LABEL] STC_PN_INFO=You can assign a name for the printer port. Port names that already exist (eg. LPT1:) can not be used.\nIf a printer port is not modified, the default printer port name will be used. STC_PN_NAME=&Printer Port Name: STC_LA_INFO=Please type the IP address of the printer. STC_LA_IP=&IP Address or Printer Name: STC_FN_INFO=After clicking the "Finish" button, the SC-Print AL Port will be registered as configured below. STC_FN_NAME=Printer Port Name: STC_FN_ADDR=Printing Destination Address: STC_TIMEOUT=&Timeout: STC_SEC=sec. STC_SC_INFO=Please select the printer for which you want to add a port.\nIf the printer is on the different network, please click [Configuration] and register the proper broadcast address. Then click [Search]. STC_BC_INFO=In order to search the printer in the network, please register the broadcast address. STC_BIDI=The printer you use is configured to support bi-directional communication. In case of printing problems using SC-Print AL, please select [Disable bi-directional support for this printer] in the spool setting section of your printer property.\nDo you want to continue to print job? STC_BT_INFO=No printer is found. Verify your network connection and make sure the printer(s) are turned on. [TAB] LPR1=General [LIST] ITEM0=IP Address ITEM1=Ethernet Address ITEM2=Model Name [BUTTON] OK=OK CANCEL=Cancel YES=&Yes NO=&No BTN_APPLY=&Apply BTN_NEXT=&Next > BTN_BACK=< &Back BTN_FINISH=Finish BTN_RETRY=&Retry BTN_SEARCH=&Search... BTN_CNF=&Configuration... BTN_AGAIN=&Search BTN_ADD=&Add BTN_DEL=&Delete BTN_ABOUT=A&bout CHK_BIDI=&Do not show this message next timeDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.