PATHWORK.TXT Driver File Contents (DE528.zip)

   DECnet Pathwork Installation

   *****************************************************
   * How to install DE528.DOS on DECnet PathWork v4.0
   *****************************************************

   You can use the DECnet PathWork's  NETSET.EXE program to install NDIS
   driver program.  Please refer to DECnet installation manual for detailed
   information.  The following instructions assume that you have already
   installed DECnet PathWork with 3Com's Etherlink II card.

   Location of driver : \NDIS\DOS\LAN_S4\DE528.DOS

   1) Modify your CONFIG.SYS file as follows:

        device = c:\decnet\ELNKII.SYS
                        to
        device = c:\decnet\DE528.DOS

   2) Modify the PROTOCOL.INI file as follows:

        from:
        ---------------------------------
                [ELNKMACII]
                drivername = ELNKII$
                ioaddress = 0x300
                interrupt = 3
                xmitbufs = 2

                [IPX4MAC]
                   :
                bindings = ELNKMACII
                   :

                [DATALINK]
                   :
                bindings = ELNKMACII
                   :

        to:
        ---------------------------------
                [DE528]
                drivername = DE528$

                [IPX4MAC]
                   :
                bindings = DE528
                   :

                [DATALINK]
                   :
                bindings = DE528
                   :

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.92