MSLANMAN.TXT Driver File Contents (DE528.zip)

   LAN Manager Workstation/Server

   Introduction:
   -------------
   This document describes the procedure to setup LAN  Manager 2.1
   Workstation/Server driver for DE-528 PCI ethernet adapter.

   Location of Driver:(DOS) \MSLANMAN.DOS\DRIVERS\ETHERNET\DE528\DE528.DOS
                      (OS/2)\MSLANMAN.OS2\DRIVERS\ETHERNET\DE528\DE528.OS2


   Sample Configuration Files:
   ---------------------------
      CONFIG.SYS (for DOS will contain):

          DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /I:C:\LANMAN.DOS
          DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\DE528\DE528.DOS

      PROTOCOL.INI (will contain):

         [DE528_NIF]
         ; DE528 RPOTOCOL.INI SAMPLE

           DriverName = DE528$


      CONFIG.SYS (for OS/2 will contain):

          DEVICE=C:\LANMAN.OS2\DRIVERS\PROTMAN\PROTMAN.OS2 /I:C:\LANMAN.OS2
          DEVICE=C:\LANMAN.OS2\DRIVERS\ETHERNET\DE528\DE528.OS2


      PROTOCOL.INI (will contain):

         [DE528_NIF]
         ; DE528 RPOTOCOL.INI SAMPLE

           DriverName = DE528$

   Setup procedures :
   ------------------
      Before you start with the installation process, make sure that the
      adapter  is properly  installed  and  configured. Make  sure  your
      Microsoft LAN Manager is properly installed.

      1. Run the appropriate Microsoft Lan Manager SETUP for computer you
         are setting up.(DOS, OS/2 or OS/2 Server). Select "Configuration"
         item ,(the DE-528 driver isn't included on the Lan Manager disk)
         and insert the DE-528 driver disk, select the DE-528 driver and
         follow the directions.

      2. When completed, reboot your computer.


   NOTES:
   ------

      1. Parameters for the PROTOCOL.INI file:

         DRIVERNAME: This is the one required parameter. See example at top
                     of this document for syntax.

      2. Sample PROTOCOL.INI for LAN Manager:

           [PROTMAN]
           DRIVERNAME = PROTMAN$
           DYNAMIC = YES
           PRIORITY = NETBEUI

           [NETBEUI_XIF]
           Drivername = netbeui$
           SESSIONS = 6
           NCBS = 12
           BINDINGS = "DE528_NIF"
           LANABASE = 0

           [DE528_NIF]
           ;
           ; DE528 PROTOCOL.INI Sample Adapter
           ;
           DriverName = DE528$
           AdapterID  = @004005678901

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.07