To load the packet driver use the following syntax: NE2PD [-d] [-n] [-w] [-u] <packet_int_no> where: [-d] The "-d" switch does not start LAN card until this driver is called by the higher layer programs. [-n] The "-n" switch converts Novell packets. The n option converts the type 8137 packets from the BYU packet driver IPX into Novell ISO-like packets. [-w] Steve Wallace added a hack to let the packet drivers run under Windows. This is not to be construed with the proper solution, which is to write a TCP/IP package for Windows. This hack is enabled only when you use the '-w' switch. [-u] Using this switch can unload the Packet Driver. <packet_int_no> This specifies the software interrupt (IRQ) where you will load the packet driver. It must be in the range 0x60 to 0x80. The PC/TCP kernel, by default, is loaded at interrupt 0x61 (so don't load the packet driver there!) <int_level> Autodetection from hardware configuration. <io_addr> Autodetection from hardware configuration. Example: The following command line loads the ACCTON-NE2 packet driver at software interrupt 60h, at I/O address 300, at hardware interrupt 3 NE2PD 0x60 Note: The default I/O address is 300 . Note: The default hardware interrupt is 3 Note: The placement of 0x prior to the parameters. After the packet driver is loaded, you can rung the PC/TCP kernel ETHDRV.EXE. The PC is then ready for PC/TCP communications. This Packet Driver is ONLY for ACCTON-NE2 adapters . ---the end---Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.