Accton Technology Corporation PC-NFS Software Interface Program Installation ============================================== Copyright (c) 1992, 1993 by Accton Technology Corporation. All rights reserved. Using any Accton Ethernet LAN Adapter and the Accton PC-NFS Software Interface Program, you can run the Sun MicroSystems PC-NFS on your PC. The following files will be used in this installation: Files Contents -------------------------------------------------------------- PCNFSIF.SYS PC-NFS Software Interface Program NWPD.COM Accton packet driver Installation ------------ 1. Install the Sun Microsystems PC-NFS program in your PC's hard disk. Refer to the PC-NFS Manual for more details. Upon completing the installation process an \NFS subdirectory is created in your hard disk drive. 2. When prompted to identify the network interface card that your are using, select "WD8003" from the list. 3. Likewise, when asked for the interrupt and I/O base address select the following respectively: interrupt level (IRQ) 3 I/O Base Address 300h 4. Copy the following files in the \NFS directory of your hard disk: PCNFSIF.SYS NWPD.COM 5. Modify the CONFIG.SYS file to include the following command lines: DEVICE=C:\ANSI.SYS DEVICE=C:\NFS\PCNFS.SYS DEVICE=C:\NFS\SOCKDRV.SYS DEVICE=C:\NFS\PCNFSIF.SYS LASTDRIVE=V 6. Create or modify an existing AUTOEXEC.BAT file to include the following: C:\NFS\NWPD 98 SET PATH = C:\; C:\NFS SET TZ=CST6 SET NFSDRIVE=C PRT * REM execute the application you need NFSRUN Important notes about the AUTOEXEC.BAT: --------------------------------------- a. For proper system operation, make sure that the C:\NFS\NWPD 98 command line comes before the NFSRUN command. b. For more information about the NWPD.COM command, please check the *.txt file in the PKTDRV subdirectory of your driver diskette. c. Allowable values for the software interrupt vector range from 96 to 128. The default is 98. 7. Reboot the PC and start the PC-NFS program. You may now run the PC-NFS commands on your PC to allow communication with other computers on the network that use the TCP/IP protocol. -- THE END --Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.