PCNFS.TXT Driver File Contents (Accton_en165x.zip)


		Accton Technology Corporation
	PC-NFS Software Interface Program Installation
	==============================================

Copyright (c) 1992, 1993 by Accton Technology Corporation.
All rights reserved.

Using any Accton Ethernet LAN Adapter and the Accton
PC-NFS Software Interface Program, you can run the
Sun MicroSystems PC-NFS on your PC.

The following files will be used in this installation:

Files		Contents
--------------------------------------------------------------
PCNFSIF.SYS	PC-NFS Software Interface Program
NWPD.COM	Accton packet driver

Installation
------------

1. Install the Sun Microsystems PC-NFS program in your
   PC's hard disk. Refer to the PC-NFS Manual for more
   details. Upon completing the installation process
   an \NFS subdirectory is created in your
   hard disk drive.

2. When prompted to identify the network interface card
   that your are using, select "WD8003" from the list.

3. Likewise, when asked for the interrupt and I/O base
   address select the following respectively:

   interrupt level (IRQ) 3
   I/O Base Address 300h

4. Copy the following files in the \NFS directory
   of your hard disk:

    PCNFSIF.SYS
    NWPD.COM

5.  Modify the CONFIG.SYS file to include the following
    command lines:

     DEVICE=C:\ANSI.SYS
     DEVICE=C:\NFS\PCNFS.SYS
     DEVICE=C:\NFS\SOCKDRV.SYS
     DEVICE=C:\NFS\PCNFSIF.SYS
     LASTDRIVE=V

6. Create or modify an existing AUTOEXEC.BAT file
   to include the following:

     C:\NFS\NWPD 98
     SET PATH = C:\; C:\NFS
     SET TZ=CST6
     SET NFSDRIVE=C
     PRT *
     REM execute the application you need
     NFSRUN

     Important notes about the AUTOEXEC.BAT:
     ---------------------------------------
     a. For proper system operation, make sure that the
	C:\NFS\NWPD 98 command line comes before
	the NFSRUN command.
     b. For more information about the NWPD.COM command,
	please check the *.txt file in the PKTDRV
	subdirectory of your driver diskette.
     c. Allowable values for the software interrupt vector
	range from 96 to 128. The default is 98.

7. Reboot the PC and start the PC-NFS program.
   You may now run the PC-NFS commands on your PC
   to allow communication with other computers on the
   network that use the TCP/IP protocol.



-- THE END --

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 1.01