OEMSETUP.INF Driver File Contents (e22v200.zip)

;***********************************************************************
;
; OEMSETUP.INF
;
;       E22XX network card and driver SETUP INF file.
;   For Single chip card only!!!!
; History:
; v1.01 Release with help
;v1.02  Uses separate oemsetup.inf files for Single/Dual chip cards
;***********************************************************************

[Identification]
    OptionType = NetAdapter

[PlatformsSupported]
    ISA
    EISA

[Options]
    E22XX

;***********************************************************************
; CONSTANTS FOR USING DIALOGS
;***********************************************************************

[FileConstants]


GenericInfVersion  = " v1.02"
GenericAdapterName = "Cabletron E22XX (9000939) Adapter"
GenericDriverName  = "Cabletron E22XX Driver"
GenericSysName     = "E22N3.SYS"
GenericName        = "E22XX"

;
;  File names, etc.
;
UtilityInf      = "UTILITY.INF"
ParamInf        = "NCPARAM.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0

;
; EventLog Message File
;
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"

; Product Info
;
Manufacturer    = "Microsoft"
ProductMajorVersion     = "3"
ProductMinorVersion     = "1"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)

;
; Software
;
ProductSoftwareName     = "E22XX"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\"$(GenericSysName)
NetRuleSoftwareType     = "E22N3Sys ndisDriver E22XXDriver"

NetRuleSoftwareUse      = $(SoftwareType)
NetRuleSoftwareBindForm = """E22N3Sys"" yes no container"

NetRuleSoftwareClass    = {"E22XXDriver basic"}
NetRuleSoftwareBindable = {"E22XXDriver E22XXAdapter non exclusive 100"}
;
; Hardware
;
ProductHardwareName        = "E22XX"
NetRuleHardwareType        = "E22XX E22XXAdapter"
NetRuleHardwareBindForm    = " yes yes container"
NetRuleHardwareClass       = {"E22XXAdapter basic"}

;
; Registry Key
;
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"

[GeneralConstants]
;
;  Program flow control variables.
;
from      = ""
to        = ""
;
;  Return codes; Exit_Code is set to one of these
;
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2

KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""

TRUE            = 1
FALSE           = 0
NoTitle            = 0

ExitState   = "Active"
OldVersionExisted = $(FALSE)

DriverPath      = $(!STF_NTPATH)\drivers

[date]
    ; Now is a list which contains { Sec from 1-1-1970, Year, Month, Day, Hour,
    ; Minute, Second }
    Now = {} ? $(!LIBHANDLE) GetSystemDate

[Identify]
    ;
    ;
    read-syms Identification

    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)

    Return $(Status) $(Identifier) $(Media)

[ReturnOptions]
    ;
    ;
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}

    ;
    ; Check if the language requested is supported
    ;
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
    ;
    ; Check if the platforms requested is supported
    ;
    ifstr(i) $($1) == ""
            goto returnoptions
    endif

    set PlatformList = ^(PlatformsSupported, 1)
    Ifcontains(i) $($1) in $(PlatformList)
            goto returnoptions
    else
            set Status = STATUS_NOTSUPPORTED
            goto finish_ReturnOptions
    endif
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_ReturnOptions
    endif

    ;
    ; form a list of all the options and another of the text representing
    ;

returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL

finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)

[InstallOption]
    ;
    ; Set default values for
    ;
    set Status   = STATUS_FAILED
    ;
    ; extract parameters
    ;
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)

    ;
    ; Check if the language requested is supported
    ;
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
    Return STATUS_NOLANGUAGE
    endif

    set-subst LF = "\n"

    read-syms GeneralConstants
    read-syms FileConstants

    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
    set Continue = $(OK)
    endif
    read-syms FileConstants$(!STF_LANGUAGE)

    detect date

    set-title  $(FunctionTitle)

    set to   = Begin
    set from = Begin
;
;  Assume all is well.
;
    set CommonStatus = STATUS_SUCCESSFUL

    EndWait

;
;   Set up the operation-mode-based variables and gaily welcome
;   the user.  If the "install mode" variable is improperly set,
;   assume this is a new installation.
;

Begin = +
    Set ActivateDetection = FALSE

    Ifstr(i) $(!NTN_InstallMode) == deinstall
    set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
    set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
    set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
;        set ActivateDetection = TRUE
    set StartLabel = configureadapter
    ;
    ;   You cannot config the software component
    ;
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
        Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
        endif
        set Error = $($R0)
        set from = end
        set to = end
        goto nonfatalinfo
    endif
    else
;        set ActivateDetection = TRUE
    set StartLabel = installadapter
    set OEM_ABANDON_OPTIONS = {}
    set OEM_ABANDON_SOFTWARE = FALSE
    set OEM_ABANDON_ON = TRUE
    endif



    ;  set the default values

    ; IOBase Address = 0x2A0
    set IOBaseAddrValue1 = *($(IOBaseAddrList1), 5)

    ; IOBase Address = 0x2C0
    ;LRW set IOBaseAddrValue2 = *($(IOBaseAddrList2), 6)

    ; DMA = 5
    ;LRW set DMAValue = *($(DMAList), 1)

    set CardTypeValue = 0

    Set from = $(fatal)
    Set to = $(fatal)
    Goto $(StartLabel)

;-----------------------------------------------
; Installation Section
;-----------------------------------------------

installadapter = +
;
;   First, check whether the same version of the software exists
;
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct

    Ifstr $(KeyProduct) != $(KeyNull)
    ;
    ; Same version already existed in the local machine
    ; Popup the dialog and ask the user whether he wants to continue
    ;
    CloseRegKey $(KeyProduct)

    ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
       ;
       ; Cannot Install the same software again
       ;
       Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
           $(ProductVersion)
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
           goto ShellCodeError
       endif

       goto end
    else
       ;
       ; Add a new adapter card?
       ;
       Shell $(UtilityInf), CardExistedDlg

       ifint $($ShellCode) != $(!SHELL_CODE_OK)
           goto ShellCodeError
       endif

       ifstr(i) $($R1) != "OK"
           goto end
       endif
       set OldVersionExisted = $(TRUE)
    endif
    endif

;
;  dll load addition
;
    Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES

    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
    Goto ShellCodeError
    Else-Ifstr(i) $($R0) == STATUS_FAILED
    Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    Goto fatal
    Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
    Goto successful
    Endif

    Set SrcDir = $($R1)

    SetHelpFile "e22.hlp" 0 0

    install "Install-Dll"

    goto adaptersetup

;-----------------------------------------------
; Configuration Section
;-----------------------------------------------
;
;   Get the current values of all the parameters
;
configureadapter = +
    Ifstr $(KeyProduct) == $(KeyNull)
    OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) == $(KeyNull)
        set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
        goto fatalregistry
    Endif
    Endif

    ;
    ; Get the other parameters;  they're attached to the service parameters key
    ;
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
    Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
    Goto fatalregistry
    endif

    Set KeyParameters = $($R2)

    ;
    ;  We don't need the services key, so close it.
    ;
    CloseRegKey $($R1)

    Ifstr $(KeyParameters) == $(KeyNull)
    set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
    goto fatalregistry
    endif

    set OldVersionExisted = $(TRUE)

    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}


    ;
    ; Get the old values
    ;
    EnumRegValue $(KeyParameters) ValueList

    ForListDo $(ValueList)
    set ValueItem = $($)
    set ValueName = *($(ValueItem),1)
    set ValueData = *($(ValueItem),4)
    ifstr(i) $(ValueName) == "IoAddress"
        set IOBaseAddrIndex1 = $(ValueData)
    ;LRW else-ifstr(i) $(ValueName) == "IoAddress2"
    ; LRW   set IOBaseAddrIndex2 = $(ValueData)
    ;LRW else-ifstr(i) $(ValueName) == "DMAChannel"
    ;LRW    set DMAIndex = $(ValueData)
    else-ifstr(i) $(ValueName) == "NetworkAddress"
        set NetworkAddress = $(ValueData)
    endif

    EndForListDo

    set IOBaseAddrValue1 = *($(IOBaseAddrList1), ~($(IOBaseAddrValues1),$(IOBaseAddrIndex1)))
    ifstr(i) $(IOBaseAddrValue1) == ""
    set IOBaseAddrValue1 = *($(IOBaseAddrList1), 5)
    endif

;LRW    set IOBaseAddrValue2 = *($(IOBaseAddrList2),
;LRW ~($(IOBaseAddrValues2),$(IOBaseAddrIndex2)))
;LRW    ifstr(i) $(IOBaseAddrValue2) == ""
;LRW    set IOBaseAddrValue2 = *($(IOBaseAddrList2), 6)
;LRW    endif

;LRW    set DMAValue = *($(DMAList), ~($(DMAValues),$(DMAIndex)))
;LRW    ifstr(i) $(DMAValue) == ""
;LRW    set DMAValue = *($(DMAList), 1)
;LRW    endif

;  Save the settings as they were read from the Registry.

;    Shell $(ParamInf) Param_SaveValues
;    Set CurrParamSettings = $($R0)
;
;   Put up the adapter configuration dialog if necessary.
;
;   Note that $(CurrParamSettings) has the old known parameter values.
;
adaptersetup = +


;    Shell "" DebugConfiguration "before displaying dialog"

    Set from = adapteroptions


adapteroptions = +


    LoadLibrary "Disk 1" $(DialogDllName) hLib

    read-syms FileDependentDlg$(!STF_LANGUAGE)

    ui start "InputDlg"  $(hLib)

    set ExitButton      = $(ButtonPressed)

    FreeLibrary $(hLib)

    ifstr(i) $(DLGEVENT) == "CONTINUE"
        set IOBaseAddrIndex1 = $(Combo1Out)
        ;LRW set IOBaseAddrIndex2 = $(Combo2Out)
        ;LRW set DMAIndex = $(Combo3Out)
        set NetworkAddress = *($(EditTextOut),1)
        set ExitButton      = $(ButtonPressed)


        ui pop 1
;               goto nextstep
    else-ifstr(i) $(DLGEVENT) == "EXIT"
        set CommonStatus = STATUS_USERCANCEL
        ui pop 1
        goto end
    else
        ;
        ; Unknow command
        ;
        ui pop 1

        goto end
    endif

;
;   If installing, go create the necessary keys;
;   if configuring, they're already open.
;
skipoptions =+

    ifint $(OldVersionExisted) == $(TRUE)
    ifstr(i) $(!NTN_InstallMode) == configure
        goto writeparameters
    endif
    endif
    StartWait
    ;
    ; Add Software Component
    ;
    ifint $(OldVersionExisted) == $(FALSE)

    ifstr(i) $(!NTN_InstallMode) == "install"
       Ifstr(i) $(DoCopy) == "YES"

          Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES

          Ifint $($ShellCode) != $(!SHELL_CODE_OK)
          Goto ShellCodeError
          Else-Ifstr(i) $($R0) == STATUS_FAILED
          Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
          ifint $($ShellCode) != $(!SHELL_CODE_OK)
              goto ShellCodeError
          endif
          set Error = $($R0)
          Goto fatal
          Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
          Goto successful
          Endif

          Set SrcDir = $($R1)

       Endif

       install "Install-Option"

       ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
          Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
          ifint $($ShellCode) != $(!SHELL_CODE_OK)
          goto ShellCodeError
          endif
          set Error = $($R0)
          goto fatal
       endif
    endif



    Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
        $(ProductSoftwareName), +
        $(ProductSoftwareName), +
        $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
        $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
        $(NetEventDLL)

    Set OEM_ABANDON_SOFTWARE = TRUE

    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif

    set RegistryErrorIndex = $($R0)
    set KeyProduct      = $($R1)
    Set SoftNetRulesKey = $($R2)
    CloseRegKey $($R3)
    CloseRegKey $($R4)
    CloseRegKey $($R5)

    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        EndWait
        CloseRegKey $(KeyProduct)
        CloseRegKey $(SoftNetRulesKey)
        goto fatalregistry
    endif

    set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
               {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
               {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
               {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
               {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
               {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
               {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}

    Shell  $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif

    set RegistryErrorIndex = $($R0)

    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        EndWait
        CloseRegKey $(KeyProduct)
        CloseRegKey $(SoftNetRulesKey)
        goto fatalregistry
    endif

    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
                {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
                {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}

    Shell  $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif

    set RegistryErrorIndex = $($R0)

    CloseRegKey $(KeyProduct)
    CloseRegKey $(SoftNetRulesKey)

    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        EndWait
        goto fatalregistry
    endif
    endif
;
;   Create the HARDWARE\Netcard region and its corresponding service
;
    Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)

    ifint $($R4) != -1
    Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
    endif

    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    goto ShellCodeError
    endif

    set RegistryErrorIndex = $($R0)

    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
    EndWait
    CloseRegKey $($R1)
    CloseRegKey $($R2)
    CloseRegKey $($R3)
    goto fatalregistry
    endif

    set KeyParameters = $($R3)
    set KeyAdapterRules = $($R2)
    set AdapterNumber = $($R4)

    set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
               {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
               {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
               {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
               {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
               {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}

    Shell  $(UtilityInf), AddValueList, $($R1), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    goto ShellCodeError
    endif

    CloseRegKey $($R1)

    set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
    set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)

    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
            {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
            {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
            {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}

    Shell  $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    goto ShellCodeError
    endif

    set RegistryErrorIndex = $($R0)

    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
    EndWait
    CloseRegKey $(KeyParameters)
    CloseRegKey $(KeyAdapterRules)
    goto fatalregistry
    endif

    CloseRegKey $(KeyAdapterRules)

    goto writeparameters
;
;   REQUIRED:   $(KeyParameters) contains service Parameters key handle
;
writeparameters = +
    Shell $(UtilityInf), GetBusTypeNum
    set BusTypeNum = $($R1)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    goto ShellCodeError
    endif

;    Set NewValueList = {{Transceiver,$(NoTitle),$(!REG_VT_DWORD),$(TransceiverValue)},+
;                       {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
;                       {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
;                       {MemoryMapped,$(NoTitle),$(!REG_VT_DWORD),$(MappedValue)},+
;                       {InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
;                       {IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)}}
;

    set IOBaseAddrValue1 = *($(IOBaseAddrValues1), ~($(IOBaseAddrList1),$(IOBaseAddrIndex1)))

;LRW    set IOBaseAddrValue2 = *($(IOBaseAddrValues2), ;LRW~($(IOBaseAddrList2),$(IOBaseAddrIndex2)))

;LRW    set DMAValue = *($(DMAValues), ~($(DMAList),$(DMAIndex)))

    set NetworkAddress = *($(EditTextOut),1)


    set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),0},+
        {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
        {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
        {IoAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue1)},+
        ;LRW {IoAddress2,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue2)},+
        ;LRW {DMAChannel,$(NoTitle),$(!REG_VT_DWORD),$(DMAValue)},+
        {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NetworkAddress)}}

    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)

    CloseRegKey $(KeyParameters)

    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    goto ShellCodeError
    endif

    set RegistryErrorIndex = $($R0)

    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
    goto fatalregistry
    endif

    EndWait

    goto successful

;-----------------------------------------------
; Binding section
;-----------------------------------------------
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal

;-----------------------------------------------
; Removeadapter section
;-----------------------------------------------

removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
    ; Remove Software Component
    Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
        $(ProductSoftwareName)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif

    set RegistryErrorIndex = $($R0)

    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        goto fatalregistry
    endif
    else
    Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
        $(ProductSoftwareName), $(!NTN_RegBase)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif

    set RegistryErrorIndex = $($R0)

    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        goto fatalregistry
    endif
    endif

    goto end

;-----------------------------------------------
; Upgrade Software section
;-----------------------------------------------

UpgradeSoftware = +

    ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
    ; Upgrade software component
    ;
    ; see whether the same version exist or not
    ;
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct

    Ifstr $(KeyProduct) != $(KeyNull)
        GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
        set Version = *($(VersionInfo), 4)

        ;
        ; Update the binaries
        ;
        Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)

        ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
        endif

        set !UG_Filename = $($R0)

        ifstr(i) $(!UG_Filename) != ""
        install "Install-Update"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
            goto fatal
        endif
        endif

        ; Upgrade the version number
        ;
        SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
        SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}

        ;
        ; do nothing for update
        ;
        ifint $(Version) != $(ProductVersion)
           ;
           ; If the major version number is not the same,
           ; it is major upgrade. So let Upgrade the product
           ;
           ;
           ; make other upgrade change if necessary
           ;
        endif
        CloseRegKey $(KeyProduct)
    else
        ;
        ; Cannot Open software key, goto ERROR
        ;
        goto fatalregistry
    endif
    else
    ;
    ; upgrade/update hardware component
    ; There is no different between upgrade and update for hardware
    ; component
    ;
    ; 1. Get the Service Name
    ; 2. Change the NetRule section if necessary
    ;
    OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
          $(MAXIMUM_ALLOWED) NetworkCardKey
    Ifstr(i) $(NetworkCardKey) != $(KeyNull)
        ;
        ; Get Service name
        ;
        GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
        set ServiceName = *($(ServiceNameInfo), 4)

        ;
        ; Change the NetRule if necessary
        ;
        OpenRegKey $(NetworkCardKey) "" "NetRules" +
        $(MAXIMUM_ALLOWED) NetRuleKey
        Ifstr(i) $(NetRuleKey) != $(KeyNull)
        ;
        ; Make the change....
        ;
        else
        ;
        ; Error, cannot open net rules key
        ;
        goto fatalregistry
        endif

        CloseRegKey $(NetRules)
        CloseRegKey $(NetworkCardKey)
    else
        ;
        ; Error, cannot open network card key
        ;
        goto fatalregistry
    endif
    ;
    ; 3. Change the service section of the hardware. i.e.,
    ;    ParameterName change, value change, etc.
    ;
    OpenRegKey $(!REG_H_LOCAL) "" +
          $(!NTN_ServiceBase)"\"$(ServiceName) +
          $(MAXIMUM_ALLOWED) ServiceKey

    Ifstr(i) $(ServiceKey) != $(KeyNull)
        ;
        ; Get the ServiceKey to change the Start value
        ; or Type value. Or open Parameters key to
        ; change the hardware parameters if necessary.
        ;
        CloseRegKey $(ServiceKey)
    else
        ;
        ; Error, cannot open network card key
        ;
        goto fatalregistry
    endif
    endif

    goto end
    ;
    ; End of Upgrade Software
    ;

;
;  Escape hatches
;
successful = +
    goto end

abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
    Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
        $(ProductSoftwareName), $($)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif

    set RegistryErrorIndex = $($R0)

    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        goto fatalregistry
    endif
    EndForListDo

    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
    ; Remove Software Component
    Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
        $(ProductSoftwareName), FALSE
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif

    set RegistryErrorIndex = $($R0)

    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        goto fatalregistry
    endif
    endif

    goto end

;
; warning display
;
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
    goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
    goto $(from)
    else
    goto "end"
    endif
;
; non fatal error display
;
nonfatalinfo = +
    Set Severity = STATUS
    Set CommonStatus = STATUS_USERCANCEL
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
    Set Severity = NONFATAL
    Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
    goto $(from)
    else
    goto "end"
    endif

;
;  Registry is broken
;
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
;
;  Netcard detection failure
;
fataldetect = +
    Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    goto ShellCodeError
    endif
    set Error = $($R0)
    Goto fatal
;
; fatal error display
;
fatal = +
    ifstr(i) $(Error) == ""
    Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    goto ShellCodeError
    endif

    goto setfailed

;
;  Shelling error
;
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed

setfailed = +
    set CommonStatus = STATUS_FAILED
    ;
    ; if OEM_ABANDON_ON == TRUE, then remove the registry entries
    ;
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
    set OEM_ABANDON_ON = FALSE
    goto abandon
    endif
    goto end

end = +
    goto term

term = +

    Return $(CommonStatus)

[DebugConfiguration]

    Set InfName = "OEMsetup.INF"

    return


;***************************************************************
;  INSTALL SECTIONS
;***************************************************************
[Install-Option]
    set STF_VITAL = ""

    ifstr(i) $(AddCopy) == "YES"

    ;
    ; Add the files to the copy list
    ;
    ;  BUGBUG: eliminate the "nt2" in the next line when Sunil fixes
    ;      the other INF files
    ;
    AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers

    endif

    ifstr(i) $(DoCopy) == "YES"

       ;
       ; Copy files in the copy list
       ;
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList

    endif

    Exit

[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   ;set STF_VERSION     = "YES"

   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)

   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList

   exit

[Install-Dll]
   set STF_VITAL        = ""
   AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
   CopyFilesInCopyList
   exit

[Source Media Descriptions]
    1  = "Windows NT Setup Disk #1"
    2  = "Windows NT Setup CD-ROM Disk"
    5  = "Cabletron Drivers Disk"
    99  = "LMHOST disk"

[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386

[Files-Inf]
5,      oemsetup.inf,    SIZE=1000,     RENAME=$(!UG_Filename)

[Files-E22XX]
5, E22N3.SYS , SIZE=88888

[Files-Dll]
5, ctrondlg.dll,  SIZE=999
5, e22.hlp, SIZE=9999

[LanguagesSupported]
    ENG

[OptionsTextENG]
    E22XX     = "Cabletron E22XX Ethernet (9000939) Adapter"

[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
           "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"

FunctionTitle   = $(GenericAdapterName)" Card Setup"$(GenericInfVersion)

ProductSoftwareDescription = $(GenericDriverName)
ProductHardwareDescription = $(GenericAdapterName)

ProductSoftwareTitle =       $(GenericDriverName)
ProductHardwareE22XXTitle =       $(GenericAdapterName)

DialogDllName   = "ctrondlg.dll"

IOBaseAddrList1 = ^(IOBaseAddrChoices, 1)
IOBaseAddrValues1 = ^(IOBaseAddrChoices, 2)

;LRW IOBaseAddrList2 = ^(IOBaseAddrChoices, 1)
;LRW IOBaseAddrValues2 = ^(IOBaseAddrChoices, 2)

;LRW DMAList = ^(DMAChoices, 1)
;LRW DMAValues = ^(DMAChoices, 2)

[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = 0
Continue    = "Continue"
Cancel      = "Cancel"

[FileDependentDlgENG]

DlgText = "Please select values for the following fields:"

DlgType = "Combination"
DlgTemplate = "E22XX_SINGLE"
;LRW DlgTemplate = "E22XX"
Caption = $(FunctionTitle)

CBOptionsGreyed = {}
NotifyFields = {NO, NO}
HelpContext = 0

Edit1Label = "Alt Network &Address:"
EditTextLim = 17
EditTextIn = $(NetworkAddress)

Combo1Label = "I/O Port&1:"
;LRW Combo2Label = "I/O Port&2:"
;LRW Combo3Label = "&DMA Channel:"

Combo1List = $(IOBaseAddrList1)
Combo1Out  = $(IOBaseAddrValue1)

;LRW Combo2List = $(IOBaseAddrList2)
;LRW Combo2Out  = $(IOBaseAddrValue2)

;LRW Combo3List = $(DMAList)
;LRW Combo3Out = $(DMAValue)

;LRW ComboListItemsIn  = {Combo1List, Combo2List, Combo3List}
ComboListItemsIn  = {Combo1List}

;LRW ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out}
ComboListItemsOut = {Combo1Out}

;EditTextIn = {"",""}

;EditTextLim = {"",""}

[IOBaseAddrChoices]
IOBase_1  = "0x200",512
IOBase_2  = "0x220",544
IOBase_3  = "0x240",576
IOBase_4  = "0x280",640
IOBase_5  = "0x2A0",672
IOBase_6  = "0x2C0",704
IOBase_7  = "0x300",768
IOBase_8  = "0x320",800
IOBase_9  = "0x340",832
IOBase_10  = "0x380",896
IOBase_11  = "0x3A0",928

[DMAChoices]
DMA_1 = "5",5
DMA_2 = "6",6
DMA_3 = "7",7
DMA_4 = "3",3

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.33