Novell NetWare ODI Driver Installation
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Follow the steps outlined below to create a driver diskette for use with
Novell Advanced NetWare.
This file contains information about using the EP427.COM Novell DOS ODI
client driver with your EP-427 PCMCIA Ethernet adapter.
Preparation
ÄÄÄÄÄÄÄÄÄÄÄ
Before you start with the workstation installation process make sure you
have the following items on hand:
1) EP427 PC card
2) EP427 driver diskette
3) Novell WSGEN diskette.
Create a BOOT diskette (this diskette may be self-booting , or it may be
be a DOS-formatted blank diskette).
NOVELL NetWare installation
===========================
1. Create a directory and copy the following files to it:
a. LSL.COM ÄÄ supplied by Novell in the WSGEN diskette.
(b.) RPLODI.COM ÄÄ Optinal, it's necessary for remote booting.
supplied by Novell.
c. EP427.COM ÄÄ EP427 Driver in the \NOVELL\WKSTN subdirectory
of the EP427 adapter diskette.
d. IPXODI.COM ÄÄ supplied by Novell in the WSGEN diskette.
e. NETx.COM ÄÄ supplied by Novell in the WSGEN diskette.
Ä or Ä
EMSNETx.EXE ÄÄ (NETx program with EMS support)
Ä or Ä
XMSNETx.EXE ÄÄ (NETx program with XMS support)
f. NET.CFG ÄÄ Optional configuration file supplied by the
subdirectory of the EP427 adapter diskette.
Note: EP-427 default frame type is Ethernet_802.2 , but the
default frame type is Ethernet_802.3 for Netware 3.X ,
Ethernet_802.2 for Netware 4.0.
The LSL.COM, EP427.COM, IPXODI.COM, NETX.EXE and NETX.CFG files can be
found on this installation disk.The other files are included with your
Novell workstation software.
2. Edit the NET.CFG file and check that the INT number,the PORT number and
the network protocol type settings are suitable for your network , and
change any settings as necessary.
Note: The INT No and the PORT address must be equal to the /irq and /io
parameters specified to the Card-Enabler program.
EP-427 default frame type is Ethernet_802.2,but the default frame
type is Ethernet_802.3 for Netware 3.10 and 3.11 , Ethernet_802.2
for Netware 3.12 and 4.xx.
3. To connect to a server, execute the following commands:
LSL
EP427
IPXODI
NETX
LOGIN {User Name}
You may wish to write all commands into a batch file and execute the
batch file for convience.
Note : NET.CFG for EP-427
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
The NET.CFG file is used to provide the software configuration to the
ODI driver on the NetWare workstation. Typically, all of the required
operating parameters will have been preset by EP427 matched with file
setting.
You can edit the NET.CFG file that is on the current directory in
order to change, add or delete any desired options by way of a plain-
ASCII text editor(DOS 5.0's EDIT and EDLIN commands are good examples
of plain-ASCII text editors).
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ IMPORTANT: There can only be ONE file named NET.CFG in the ³
³ same floppy disk or pathed directory. If the driver finds ³
³ more than one NET.CFG file, it will become confused and may ³
³ not work reliably. MAKE SURE THERE IS ONLY *ONE* NET.CFG! ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
PORT : Indicates the base I/O address for the EP-427 network card.
type : [hex]
range : [0x300,0x320,0x340,0x360] for EP-427 card
range : [0x200, 0x220 ~ 0x380] for EP-427 card
INT : Indicates the hardware interrupt being used by the
network card.
type : [decimal]
range : [2,3,4,5,10,11,12,15] for EP-427 card
FRAME : Indicates the link-level frame type.
Note: The default frame type is Ethernet_802.3
for Netware 3.X.
The default frame type is Ethernet_802.2
for Netware 4.0.
Example for NET.CFG
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Following is an example fragment from a NET.CFG file. This fragment
lists the EP-427 options described above. If this is the first time
you will be creating a NET.CFG file , note the layout of the NET.CFG
fragment below. Spacing in the layout of the NET.CFG is important for
reliable operation of the adapter and network connection.
ÚÄ> Link Driver EP427
³ÚÄÄÄ> PORT 300
³ÃÄÄÄ> INT 5
³ÀÄÄÄ> FRAME ETHERNET_802.3
³
ÀÄÄ The line "Link Driver EP427" must not be indented at all.
Closing Notes
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
1) Appendix "E" of the Novell NetWare 386 Installation Guide provides
more information about the usage of NET.CFG files.
2) Before you running any ODI drivers, you have to enable the EP-427 PC
card by running ecard.exe or ecardcs.exe.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.