[Identification]
OptionType = NetAdapter
[PlatformsSupported]
ISA
EISA
"Jazz-Internal Bus"
[Options]
PNPWNT
[FileConstants]
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer = "VIA"
ProductMajorVersion = "3"
ProductMinorVersion = "5"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName = "PNPWNT"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\pnpwnt.sys"
NetRuleSoftwareType = "pnpwntSys ndisDriver pnpwntDriver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """PnpwntSys"" yes no container"
NetRuleSoftwareClass = {"pnpwntDriver basic"}
NetRuleSoftwareBindable = {"pnpwntDriver pnpwntAdapter non exclusive 100"}
ProductHardwareName = "PNPWNT"
NetRuleHardwareType = "pnpwnt pnpwntAdapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"pnpwntAdapter basic"}
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = $(OK)
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
; set ActivateDetection = FALSE
;Philip-DEBUG 042496 BEGIN
;set this variable to 1 to enable debug output
set !G:DebugOutputControl = 0
Debug-Output "Debug output enabled."
;Philip-DEBUG END
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
set CommonStatus = STATUS_REBOOT
; set ActivateDetection = TRUE
set StartLabel = configureadapter
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Debug-Output "Cannot configure the PNP driver software."
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
else
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
; set ActivateDetection = TRUE
endif
; Debug-Output "OEMNADN2.INF: =================================================="
; Debug-Output "OEMNADN2.INF: STF_CWDIR is: "$(!STF_CWDIR)
; Debug-Output "OEMNADN2.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE)
; Debug-Output "OEMNADN2.INF: Option is: "$(Option)
; Debug-Output "OEMNADN2.INF: !STF_NCDETECT is: "$(!STF_NCDETECT)
; Debug-Output "OEMNADN2.INF: !STF_NCOPTION is: "$(!STF_NCOPTION)
; Debug-Output "OEMNADN2.INF: !STF_NCDETCARD is: "$(!STF_NCDETCARD)
; Debug-Output "OEMNADN2.INF: !STF_NCDETINFO is: "$(!STF_NCDETINFO)
; Debug-Output "OEMNADN2.INF: =================================================="
; Set DetectedCard = FALSE
; Ifstr(i) $(ActivateDetection) != TRUE
; Goto skipdetection
; Endif
; Debug-Output "OEMNADN2.INF: Calling Param_BuildTypeLists"
; Shell $(ParamInf) Param_BuildTypeLists $(Option) $(TypeList)
; Set Status = $($R0)
; ifstr(i) $(Status) != STATUS_SUCCESSFUL
; Goto fataldetect
; Endif
; Debug-Output "OEMNADN2.INF: Calling Param_SetDefaults"
; Shell $(ParamInf) Param_SetDefaults {}
; Shell $(ParamInf) HexListFromDecList $(IOBaseAddrDecList)
; Set IOBaseAddrHexList = $($R0)
; Shell $(UtilityInf) SortList $(IRQList) TRUE FALSE
; Set IRQList = $($R0)
; Ifstr(i) $(!STF_NCDETECT) == YES
; Ifstr(i) $(!STF_NCOPTION) == $(Option)
; Set DetectedCard = TRUE
; Debug-Output "OEMNADN2.INF: Setting DetectedCard to TRUE"
; Endif
; Endif
; Philip 101195 BEGIN
set IOBaseAddressList = ^(IOBaseChoices, 1)
set IOBaseAddressValueList = ^(IOBaseChoices, 2)
set IOBaseAddress = *($(IOBaseAddressList), 8) ;Philip-AUTO
set IRQList = ^(IRQChoices, 1)
set IRQValueList = ^(IRQChoices, 2)
set IRQ = *($(IRQList), 9) ;Philip-AUTO
set DUPLEXList = ^(DUPLEXChoices, 1)
set DUPLEXValueList = ^(DUPLEXChoices, 2)
set DUPLEX = *($(DUPLEXList), 1)
set RadioET = 2
set RadioER = 4
set PNPID = ""
; Philip 101195 END
skipdetection =+
set from = $(fatal)
set to = $(fatal)
goto $(StartLabel)
installadapter = +
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
set CommonStatus = STATUS_USERCANCEL
goto end
endif
set OldVersionExisted = $(TRUE)
endif
endif
;Philip-HELP BEGIN
ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
install "Install-Help"
endif
;Philip-HELP END
; Ifstr(i) $(DetectedCard) != TRUE
; Goto adaptersetup
; Endif
; StartWait
; Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD)
; EndWait
; Ifstr(i) $($R0) != STATUS_SUCCESSFUL
; Goto adaptersetup
; Endif
; Set DetectedParams = $($R1)
; Debug-Output "OEMNADN2.INF: Calling Param_SetDefaults to merge detected params"
; Shell $(ParamInf) Param_SetDefaults $(DetectedParams)
goto adapteroptions
configureadapter = +
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component product key"
goto fatalregistry
Endif
Endif
Debug-Output "INF: Shelling to FindService"
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: FindService shell failure"
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "INF: FindService Shell error: "$($R0)
Goto fatalregistry
endif
set KeyParameters = $($R2)
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component service"
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
Ifstr(i) $(ValueName) == "InterruptNumber"
set IRQValue = $(ValueData)
else-ifstr(i) $(ValueName) == "IoBaseAddress"
set IOBaseAddressValue = $(ValueData)
else-ifstr(i) $(ValueName) == "BusType"
set BusInterfaceType = $(ValueData)
else-ifstr(i) $(ValueName) == "BusNumber"
set BusNumber = $(ValueData)
else-Ifstr(i) $(ValueName) == "PNPID" ; Philip 101195 BEGIN
set PNPID = $(ValueData)
else-Ifstr(i) $(ValueName) == "EarlyTransmit"
set ETFlag = $(ValueData)
else-Ifstr(i) $(ValueName) == "EarlyReceive"
set ERFlag = $(ValueData)
else-Ifstr(i) $(ValueName) == "FullDuplex"
set FDFlag = $(ValueData)
endif
EndForListDo
ifstr(i) $(IRQValue) == ""
set IRQValue = *($(IRQValueList), 9) ;Philip-AUTO
endif
set IRQ = *($(IRQList), ~($(IRQValueList), $(IRQValue)))
ifstr(i) $(IOBaseAddressValue) == ""
set IOBaseAddressValue = *($(IOBaseAddressValueList), 8) ;Philip-AUTO
endif
set IOBaseAddress = *($(IOBaseAddressList), ~($(IOBaseAddressValueList),+
$(IOBaseAddressValue)))
ifstr(i) $(FDFlag) == ""
set FDFlag = *($(DUPLEXValueList), 1)
endif
set DUPLEX = *($(DUPLEXList), ~($(DUPLEXValueList), $(FDFlag)))
Ifstr(i) $(ETFlag) == ""
set ETFlag = 0
endif
Ifint $(ETFlag) == 1
set RadioET = 1
else
set RadioET = 2
endif
Ifstr(i) $(ERFlag) == ""
set ERFlag = 0
endif
Ifint $(ERFlag) == 1
set RadioER = 3
else
set RadioER = 4
endif
; Philip 101105 END
goto adapteroptions
;adaptersetup =+
; Shell $(ParamInf) Param_ParameterConfidence
; Ifstr(i) $($R0) != STATUS_SUCCESSFUL
; Debug-Output "OEMNADE2.INF: parameter confidence too low to bypass configuration"
; Goto adapteroptions
; Endif
; Ifstr(i) $(DetectedCard) == TRUE
; Ifstr(i) $(!STF_INSTALL_MODE) != CUSTOM
; Goto adapterverify
; Endif
; Endif
; goto adapteroptions
adapteroptions = +
set from = adapteroptions
ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
ifstr(i) $(!AutoNetInterfaceType) != ""
set BusInterfaceType = $(!AutoNetInterfaceType)
else
set BusInterfaceType = 1
endif
ifstr(i) $(!AutoNetBusNumber) != ""
set BusNumber = $(!AutoNetBusNumber)
else
set BusNumber = 0
endif
goto adapterverify
endif
; set IOBaseAddress = *($(IOBaseAddrHexList), ~($(IOBaseAddrDecList),+
; $(IOBaseAddrValue)))
read-syms FileDependentDlg$(!STF_LANGUAGE)
SetHelpFile "pnpwnt.hlp" 0 6 0 ;Philip-HELP
ui start "InputDlg"
ifstr(i) $(DLGEVENT) == "CONTINUE"
set IRQ = $(Combo1Out) ; Philip 101195 BEGIN
set IOBaseAddress = $(Combo2Out)
set DUPLEX = $(Combo3Out)
IfContains "1" IN $(RadioOut)
set ETFlag = 1
else-IfContains "2" IN $(RadioOut)
set ETFlag = 0
endif
IfContains "3" IN $(RadioOut)
set ERFlag = 1
else-IfContains "4" IN $(RadioOut)
set ERFlag = 0
endif
set PNPID = *($(EditTextOut),1) ; Philip 101195 END
ui pop 1
else-ifstr(i) $(DLGEVENT) == "BACK"
set CommonStatus = STATUS_USERCANCEL
Debug-Output "Action: exit. Bye."
ui pop 1
goto end
else
ui pop 1
Debug-Output "Action: unknown. Bye."
goto end
endif
; set IOBaseAddrValue = *($(IOBaseAddrDecList), ~($(IOBaseAddrHexList),+
; $(IOBaseAddress)))
; Philip 091695
; ifstr(i) $(!STF_NCDETINFO) == {}
; Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusInterfaceType) $(BusNumber)
; ifint $($ShellCode) != $(!SHELL_CODE_OK)
; Debug-Output "ShellCode error."
; goto ShellCodeError
; endif
; set BusInterfaceType = $($R1)
; set BusNumber = $($R2)
set BusInterfaceType = 1
set BusNumber = 0
; else
; set BusInterfaceType = *($(!STF_NCDETINFO),5)
; set BusNumber = *($(!STF_NCDETINFO),6)
; endif
adapterverify =+
; Ifstr(i) $(DetectedCard) != TRUE
; Goto skipoptions
; Endif
; Debug-Output "OEMNADN2.INF: Calling Param_VerifyCard"
; Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD)
; Ifstr(i) $($R0) == STATUS_SUCCESSFUL
; Debug-Output "OEMNADN2.INF: Param_VerifyCard succeeded"
; Goto skipoptions
; Endif
; Set from = adapteroptions
; Set to = skipoptions
; Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING
; ifint $($ShellCode) != $(!SHELL_CODE_OK)
; Debug-Output "ShellCode error: cannot get an error string."
; goto ShellCodeError
; endif
; set Error = $($R0)
; Goto Warning
;skipoptions =+
ifint $(OldVersionExisted) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
goto writeparameters
endif
endif
StartWait
ifint $(OldVersionExisted) == $(FALSE)
ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
set KeyProduct = $($R1)
Set SoftNetRulesKey = $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add software components"
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add value list."
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
goto fatalregistry
endif
endif
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Cannot add hardware component"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add hardware component"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
CloseRegKey $(KeyAdapterRules)
goto writeparameters
writeparameters = +
; Philip 101195 BEGIN
set IOBaseAddressValue = *($(IOBaseAddressValueList), ~($(IOBaseAddressList),+
$(IOBaseAddress)))
set IRQValue = *($(IRQValueList), ~($(IRQList), $(IRQ)))
set FDFlag = *($(DUPLEXValueList), ~($(DUPLEXList), $(DUPLEX)))
set NewValueList = {{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{PNPID,$(NoTitle),$(!REG_VT_SZ),$(PNPID)},+
{FullDuplex,$(NoTitle),$(!REG_VT_DWORD),$(FDFlag)},+
{EarlyTransmit,$(NoTitle),$(!REG_VT_DWORD),$(ETFlag)},+
{EarlyReceive,$(NoTitle),$(!REG_VT_DWORD),$(ERFlag)},+
{NTFlag,$(NoTitle),$(!REG_VT_DWORD),1},+ ;Philip-SYNC
{IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddressValue)}}
; Philip 101195 END
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters)
endif
CloseRegKey $(KeyParameters)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
goto fatalregistry
endif
EndWait
goto successful
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
removeadapter = +
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
UpgradeSoftware = +
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
CloseRegKey $(KeyProduct)
else
goto fatalregistry
endif
goto end
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
nonfatalinfo = +
Set CommonStatus = STATUS_USERCANCEL
Set Severity = STATUS
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
;fataldetect = +
; Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
; ifint $($ShellCode) != $(!SHELL_CODE_OK)
; Debug-Output "ShellCode error: cannot get an error string."
; goto ShellCodeError
; endif
; set Error = $($R0)
; Goto fatal
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
ifstr(i) $(DoConfig) == "YES"
endif
Exit
;Philip-HELP BEGIN
[Install-Help]
set STF_VITAL = ""
AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Exit
;Philip-HELP END
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
exit
[Source Media Descriptions]
1 = "Windows NT Workstation CD-ROM or Setup Disk #1", TAGFILE = disk1.w
2 = "ISA Plug & Play Ethernet Adapter Driver Setup Diskette" , TAGFILE = disk1
[Signature]
FileType = MICROSOFT_FILE
[GetSignature]
read-syms Signature
return $(FileType)
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-Inf]
2, oemsetup.inf, SIZE=30000, RENAME=$(!UG_Filename)
[Files-PNPWNT]
2, PNPWNT.SYS, SIZE=200000
;Philip-HELP BEGIN
[Files-Hlp]
2,PNPWNT.HLP , SIZE=30000
;Philip-HELP END
[LanguagesSupported]
ENG
[OptionsTextENG]
PNPWNT = "ISA Plug & Play Ethernet Adapter"
[FileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
FunctionTitle = "ISA Plug & Play Ethernet Network Card Setup"
ProductSoftwareDescription = "ISA Plug & Play Ethernet Adapter Driver"
ProductHardwarePNPWNTDescription = "PNPWNT Adapter"
ProductSoftwareTitle = "ISA Plug & Play Ethernet Adapter Driver"
ProductHardwarePNPWNTTitle = "PNPWNT Adapter"
ShellCodeErrorTitle = "Error: "$(FunctionTitle)
ShellCodeErrorText = "Shell Code Error."
[DialogConstantsENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[FileDependentDlgENG]
Label1 = "&IRQ Level:"
Label2 = "I/O &Port Address:"
Label3 = "&Duplex:" ; Philip 101195 BEGIN
Group1 = "Early &Transmit"
Group2 = "Early &Receive"
Radio1 = "Enable"
Radio2 = "Disable"
Radio3 = "Enable"
Radio4 = "Disable"
DlgType = "RadioCombination"
DlgTemplate = "PROTEON" ; Philip 101195
Caption = $(FunctionTitle)
Combo1List = $(IRQList)
Combo1Out = $(IRQ)
Combo2List = $(IOBaseAddressList)
Combo2Out = $(IOBaseAddress)
Combo3List = $(DUPLEXList)
Combo3Out = $(DUPLEX)
ComboListItemsIn = {Combo1List, Combo2List, Combo3List}
ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out}
;ComboListItemsIn = {Combo1List, Combo2List}
;ComboListItemsOut = {Combo1Out, Combo2Out}
RadioIn = {$(RadioET), $(RadioER)}
Edit1Label = "P&NP ID:"
EditTextIn = $(PNPID)
EditTextLim = 12
CBOptionsGreyed = {}
RadioOptionGreyed = {}
NotifyFields = {NO, NO, NO}
;NotifyFields = {NO, NO}
HelpContext = 0 ; Philip-HELP
[IOBaseChoices]
IOBase_1 = "0x240", 576
IOBase_2 = "0x280", 640
IOBase_3 = "0x2c0", 714
IOBase_4 = "0x300", 768
IOBase_5 = "0x320", 800
IOBase_6 = "0x340", 832
IOBase_7 = "0x360", 864
IOBase_8 = "Auto", 896 ;Philip-AUTO
[IRQChoices]
IRQ_1 = "3", 3
IRQ_2 = "4", 4
IRQ_3 = "5", 5
IRQ_4 = "9", 9
IRQ_5 = "10", 10
IRQ_6 = "11", 11
IRQ_7 = "12", 12
IRQ_8 = "15", 15
IRQ_9 = "Auto", 2 ;Philip-AUTO
[DUPLEXChoices]
DUPLEX_1 = "Half", 0
DUPLEX_2 = "Full", 1 ; Philip 101195 END
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.