File Name: RELEASE.TXT Product Name: NI6510-NWDRV-2 Description: NetWare WS Packet Driver for the InterLan EtherBlaster Version: 5.85 Part Number: 158-0230-00 149-0230-00 SECTION 1 - Overview -------------------- The driver in this directory allows the Racal InterLan EtherBlaster to be used in DOS-based systems to run Novell NetWare workstation software with networking software written to the packet driver interface. Version 3.1 of this driver was certified under NetWare 286 v2.2 by the Novell Test Labs (Certification Number L-640, dated August 2, 1991). Version 4.0 incorporated high memory load enhancements; Version 4.01 incorporated a fix to support PS/2 Model 35sx and 40sx computers that support the ISA bus architecture. Version 4.04 of this driver addresses a "slowdown" issue encountered at some sites when the NI6510 received packets greater than 1514 bytes in length. It has been tested for correct operation with NetWare 386 v3.x, and has passed Novell certification tests conducted in the Racal InterLan labs. Version 5.01 supports the EtherBlaster as well as all previous versions of the NI6510. Version 5.10 supports the 8 interrupt version of the EtherBlaster. Version 5.50 supports the PCnet-ISA+ version of the EtherBlaster. Version 5.85 disables the Guaranteed Access Time (GAT) mode in the Intel 823878I System I/O (SIO) chip, which is found in some PCI/ISA PCs. When enabled, this mode can cause a violation of ISA bus timing specification for bus master devices. As a result, the InterLan EtherBlaster is prevented from accessing host memory in a timely manner. GAT mode can be modified on the command line to override the driver default (to turn GAT off). Use the -o option followed by /GAT=ON (always turns it on), /GAT=OFF (always turns it off), or /GAT=NONE (does not change the system power on default). Version 5.85 also supports the XLerator series and Plug and Play. SECTION 2 - Contents of this directory -------------------------------------- To help you install and use this product, the following files are included in this directory: RELEASE.TXT - This file WRKINSTL.TXT - Installation notes for this product E6510PKT.LAN - EtherBlaster Workstation/Packet Driver Configuration File E6510PKT.OBJ - EtherBlaster Workstation/Packet Driver Object FileDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.