The follow paramenters are used in AUTOEXEC.NCF file of Novell Server to setup the DM9102AF/DM9102F/DM9009/DM9102AF+DM9801/DM9102AF+DM9802 adapter (10/100 Fast Ethernet,10 Ethernet,1/10/100 Fast Ethernet LongRun/HomeRun) Media Mode : the default is AUTODETECT. (AUTODETECT, AUTOFULL, AUTOHALF, 100FULL, 100HALF, 10FULL, 10HALF, 1M, 1MHSLP, 1MHSHP, 1MLSLP, 1MLSHP) Rx Remote Command : the default is Disable Rx Remote Command. (Set RXCMD to Enable Rx Remote Command) Send Remote Command : the default is Disable Send Remote Command. (Set SENDCMD to Enable Send Remote Command) Rx Flow Control : the default is Disable Rx Flow Control. (Set RXFLW to Enable Rx Flow Control) Tx Flow Control : the default is Disable Tx Flow Control. (Set TXFLW to Enable Tx Flow Control) Virtual LAN : the default is Disable VLAN function. (Set VLAN to Enable VLAN function) Line Speed : the default is Autodetect Ethernet Line Speed. (SPEED=10,100,500,1400,1600) ps:SPEED=500,1400,1600 for LongRun/HomeRun to setup speed. <<< End of file >>>Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.