; Windows Modem Setup File ; Copyright 1997 Microsoft Corp. ; Manufacturer: ZyXEL Communications Corp. [Version] ; created on 04/06/98 by Manfred Recla <support@zyxel.co.at> ; for ZyXEL Comet 336r Fax+Modem+Voice, v2.011-V34-ACF-DS1 ; using the Rockwell chipset: 'RCV336ACF/SVD' (code: R6760-21) ; with enhanced voice support for Windows98 and WindowsNT 5.0 ; based on MS-MDK v1.40 (MDK140.DOC & REG140.DOC, December 1997) ; 04/06/98 -> Default key ("Waiting for Dialtone" set to OFF) ; for Slovakia & Slovenija Signature="$CHICAGO$" Class=Modem Provider=%Mfg% ClassGUID={4D36E96D-E325-11CE-BFC1-08002BE10318} ;LayoutFile=layout.inf [Strings] Mfg = "ZyXEL Communications Corp." ZC336R = "ZyXEL Comet 336r Modem+Fax+Voice" ZC336R.PnP = "ZyXEL Comet 336r Modem+Fax+Voice, Plug&Play" [ZC336R.NoResDup] UNIMODEM352B0787 [ControlFlags] ExcludeFromSelect=SERENUM\ROK5020 ExcludeFromSelect=SERENUM\ZYX13E1 [Manufacturer] %Mfg% = ZyXEL [ZyXEL] %ZC336R% = ZC336R, UNIMODEM352B0787 %ZC336R.PnP% = ZC336R, SERENUM\ZYX13E1 %ZC336R.PnP% = ZC336R, Rockwell, SERENUM\ROK5020 [ZC336R] AddReg=AllMfg.AddReg, ZC336R.Data, ZC336R.Voice, ZC336R.Fax, EXTERNAL [ZC336R.Data] HKR,, Properties, 1, 80,01,00,00, ff,00,00,00, ff,00,00,00, 07,00,00,00, 0f,00,00,00, 7f,0f,00,00, 00,c2,01,00, 40,83,00,00 HKR,, DCB, 1, 1c,00,00,00, 00,c2,01,00, 15,20,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00, 00, 00 HKR,, Default, 1, 3c,00,00,00,00,00,00,00, 00,00,00,00,01,00,00,00, 53,03,00,00 HKR, Settings, Blind_Off,, "X4" HKR, Settings, Blind_On,, "X3" HKR, Settings, CallSetupFailTimer,, "S7=<#>" HKR, Settings, Compression_Off,, "%%C0" HKR, Settings, Compression_On,, "%%C3" HKR, Settings, DialPrefix,, "D" HKR, Settings, DialSuffix,, "" HKR, Settings, ErrorControl_Off,, "&Q6\N0" HKR, Settings, ErrorControl_On,, "&Q5\N3" HKR, Settings, ErrorControl_Forced,, "&Q5\N2" HKR, Settings, ErrorControl_Cellular,, "\N3\X0&Q5-K1*H1)M1-C1-Q0" HKR, Settings, ErrorControl_Cellular_Forced,, "\N4\X0&Q5-K1*H1)M1-C1-Q0" HKR, Settings, FlowControl_Off,, "&K0" HKR, Settings, FlowControl_Hard,, "&K3" HKR, Settings, FlowControl_Soft,, "&K4" HKR, Settings, InactivityTimeout,, "S30=<#>" HKR, Settings, Modulation_CCITT,, "B0" HKR, Settings, Modulation_CCITT_V23,, "+MS=3" HKR, Settings, Modulation_Bell,, "B1" HKR, Settings, Prefix,, "AT" HKR, Settings, Pulse,, "P" HKR, Settings, SpeakerVolume_Low,, "L1" HKR, Settings, SpeakerVolume_Med,, "L2" HKR, Settings, SpeakerVolume_High,, "L3" HKR, Settings, SpeakerMode_Off,, "M0" HKR, Settings, SpeakerMode_Dial,, "M1" HKR, Settings, SpeakerMode_On,, "M2" HKR, Settings, SpeakerMode_Setup,, "M3" ;HKR, Settings, SpeedNegotiation_Off,, "N0" ;HKR, Settings, SpeedNegotiation_On,, "N1" HKR, Settings, Terminator,, "<cr>" HKR, Settings, Tone,, "T" [ZC336R.Fax] HKR, Fax\Class1\AdaptiveAnswer,SetupCommand,, "AT+FAE=1" HKR, Fax\Class1\AdaptiveAnswer\AnswerCommand, 1,, "ATE0V1Q0S95=46S0=0" HKR, Fax\Class1\AdaptiveAnswer\AnswerCommand, 2,, "ATS7=60S30=0L0M1&Q5\N3%C3&K3B0N1X4" HKR, Fax\Class1\AdaptiveAnswer\AnswerCommand, 3,, "AT+FAE=1" HKR, Fax\Class1\AdaptiveAnswer\AnswerCommand, 4,, "ATA" HKR, Fax\Class1\AdaptiveAnswer,ModemResponseFaxDetect,, "FAX" HKR, Fax\Class1\AdaptiveAnswer,SerialSpeedFaxDetect,, "19200" HKR, Fax\Class1\AdaptiveAnswer,HostCommandFaxDetect,, "ATO" HKR, Fax\Class1\AdaptiveAnswer,ModemResponseFaxConnect,, "CONNECT" HKR, Fax\Class1\AdaptiveAnswer,ModemResponseDataDetect,, "DATA" HKR, Fax\Class1\AdaptiveAnswer,SerialSpeedDataDetect,, "19200" HKR, Fax\Class1\AdaptiveAnswer,HostCommandDataDetect,, "ATO" HKR, Fax\Class1\AdaptiveAnswer,ModemResponseDataConnect,, "CONNECT" ;HKR, Fax, ExitCommand,, "" ;HKR, Fax, PreAnswerCommand,, "" ;HKR, Fax, PreDialCommand,, "" ;HKR, Fax, ResetCommand,, "" ;HKR, Fax, SetupCommand,, "" ;HKR, Fax, EnableV17Recv,, "1" ;HKR, Fax, EnableV17Send,, "1" ;HKR, Fax, FixModemClass,, "1" ;HKR, Fax, FixSerialSpeed,, "19200" ;HKR, Fax, HighestSendSpeed,, "14400" ;HKR, Fax, LowestSendSpeed,, "2400" ;HKR, Fax, HardwareFlowControl,, "1" ;HKR, Fax, SerialSpeedInit,, "57600" ;HKR, Fax, Cl1DontSync,, "1" ;HKR, Fax, Cl1FCS,, "0" ;HKR, Fax, Class1DTESpeed,, "AUTO" ;HKR, Fax, Class1FlowHW,, "+FLO=2" ;HKR, Fax, Class1FlowOff,, "+FLO=0" ;HKR, Fax, Class1FlowSW,, "+FLO=1" ;HKR, Fax, AnswerMode,, "2" ;HKR, Fax, BlindDial,, "2" ;HKR, Fax, CommaDelay,, "2" ;HKR, Fax, CopyQualityCheckLevel,, "1" ;HKR, Fax, DialToneWait,, "30" ;HKR, Fax, DisableG3ECM,, "1" ;HKR, Fax, DisableMRRecv,, "1" ;HKR, Fax, DisableMRSend,, "1" ;HKR, Fax, DontPurge,, "0" ;HKR, Fax, HangupDelay,, "60" ;HKR, Fax, ModemFaxClasses,, "14" ;HKR, Fax, ModemIdCmd,, "ATI1" ;HKR, Fax, NumRings,, "2" ;HKR, Fax, SpeakerMode,, "1" ;HKR, Fax, Volume,, "2" [EXTERNAL] HKR,, DeviceType, 1, 01 [ZC336R.Voice] HKR,,Enumerator,,serwave.vxd HKR,,VoiceProfile, 1, 27,22,09,02 ; ------- start section for NT5 voice support -------------- ; see REG140.DOC for details on next NT5 voice section. HKR, WaveDriver, BaudRate, 1, 00,c2,01,00 HKR, WaveDriver, XformID, 1, 01,00 HKR, WaveDriver, WaveDevices, 1, 02,00 HKR, WaveDriver, XformModule, ,"umdmxfrm.dll" HKR, WaveDriver, WaveHardwareID, ,"RockwellADPCMVoiceModemWave" ; ------- end section for NT5 voice support -------------- ; since mixer enabled in voiceprofile next (3) keys must be present ;HKR,, VoiceMixerMid, 1,16,00 ;HKR,, VoiceMixerPid, 1,15,00 ;HKR,, VoiceMixerLineID, 1,00,00,04,00 ; speakerphone settings, next section: HKR,, SpeakerPhoneSpecs, 1, 08,00,00,00, 0f,00,00,00, 01,00,00,00, 00,00,00,00 HKR, SpeakerPhoneEnable, 1,, "at#vls=6<cr>" HKR, SpeakerPhoneEnable, 2,, "at#cls=8<cr>" HKR, SpeakerPhoneEnable, 3,, "at#spk=1,8,1<cr>" HKR, SpeakerPhoneDisable, 1,, "at#spk=0,16,,<cr>" HKR, SpeakerPhoneDisable, 2,, "at#vls=0<cr>" HKR, SpeakerPhoneMute, 1,, "at#vls=6<cr>" HKR, SpeakerPhoneMute, 2,, "at#spk=0,,,<cr>" HKR, SpeakerPhoneUnMute, 1,, "at#vls=6<cr>" HKR, SpeakerPhoneUnMute, 2,, "at#spk=1,,,<cr>" HKR, SpeakerPhoneSetVolumeGain, 1,, "at#vls=6<cr>" HKR, SpeakerPhoneSetVolumeGain, 2,, "at#spk=,<Vol>,<Gain><cr>" ; handset settings, next section: HKR,, HandsetCloseDelay, 1,1e,00,00,00 HKR, HandsetSetRecordFormat, 1,,"at#vsr=7200<cr>" HKR, HandsetSetRecordFormat, 2,,"at#vbs=4<cr>" HKR, HandsetSetPlayFormat, 1,,"at#vsr=7200<cr>" HKR, HandsetSetPlayFormat, 2,,"at#vbs=4<cr>" HKR, OpenHandset, 1,, "at#cls=8<cr>" HKR, OpenHandset, 2,, "at#vls=1<cr>" HKR, CloseHandset, 1,, "at#vls=0<cr>" HKR, CloseHandset, 2,, "at#cls=0<cr>" HKR, StartPlay, 1,, "at#vtx<cr>" HKR, StopPlay, 1,, "None" HKR, StopPlay, 2,, "NoResponse" HKR, StartRecord, 1,, "at#vrx<cr>" HKR, StopRecord, 1,, "None" HKR, StopRecord, 2,, "NoResponse" ; note change in TerminateRecord macro to "!" ; HKR,, TerminateRecord,, "<h10>E<cr>" HKR,, TerminateRecord,, "!" HKR,, TerminatePlay,, "<h10><h03>" HKR,, AbortPlay,, "<h10><h18>" HKR, LineSetPlayFormat, 1,, "at#vls=0<cr>" HKR, LineSetRecordFormat, 1,, "None" HKR, LineSetRecordFormat, 2,, "NoResponse" HKR, VoiceToDataAnswer, 1,, "at#cls=0<cr>" HKR, VoiceToDataAnswer, 2,, "ata<cr>" HKR, VoiceAnswer, 1,, "at#cls=8<cr>" HKR, VoiceAnswer, 2,, "at#vls=0<cr>" HKR, VoiceAnswer, 3,, "at#vbt=1<cr>" HKR, VoiceAnswer, 4,, "at#vsr=7200<cr>" HKR, VoiceAnswer, 5,, "at#vbs=4<cr>" HKR, VoiceAnswer, 6,, "ata<cr>" HKR, VoiceDialNumberSetup, 1,, "at#cls=8<cr>" HKR, VoiceDialNumberSetup, 2,, "at#vls=0<cr>" HKR, VoiceDialNumberSetup, 3,, "at#vrn=0<cr>" HKR, VoiceDialNumberSetup, 4,, "at#vbt=1<cr>" HKR, VoiceDialNumberSetup, 5,, "at#vsr=7200<cr>" HKR, VoiceDialNumberSetup, 6,, "at#vbs=4<cr>" HKR,, CallerIDPrivate,, P HKR,, CallerIDOutSide,, O HKR,, VariableTerminator,, <cr><lf> HKR,, ForwardDelay, 1,88,13 HKR, GenerateDigit, 1,, "at#vts=<Digit><cr>" HKR, EnableCallerID, 1,, "at#cid=1<cr>" HKR, EnableDistinctiveRing, 1,, "at-sdr=7<cr>" HKR, Responses, "<cr><lf>VCON<cr><lf>" ,1, 00, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>DATE = " ,1, 93, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "TIME = " ,1, 94, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "NMBR = " ,1, 95, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "NAME = " ,1, 96, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "MESG = " ,1, 97, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>RING1<cr><lf>" ,1, 18, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>RING2<cr><lf>" ,1, 19, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>RING3<cr><lf>" ,1, 1a, 00, 00,00,00,00, 00,00,00,00 [AllMfg.AddReg] HKR,,Logging, 1, 01 HKR,,LoggingPath,, "ModemLog.txt" HKR,,ConfigDialog,,modemui.dll HKR,,DevLoader,,*vcomm HKR,,EnumPropPages,,"modemui.dll,EnumPropPages" HKR,,FriendlyDriver,,Unimodem.VXD HKR,,InactivityScale, 1, 0a,00,00,00 HKR,,PortSubClass,1,02 HKR,,Reset,, "ATZ<cr>" HKR, Answer, 1,, "ATA<cr>" HKR, Hangup, 1,, "ATH<cr>" HKR, Init, 1,, "AT<cr>" HKR, Init, 2,, "ATE0V1&C1&D2S95=46S0=0<cr>" HKR, Monitor, 1,, "ATS0=0<cr>" HKR, Monitor, 2,, "None" HKR, Responses, "0<cr>", 1, 00, 00, 00,00,00,00, 00,00,00,00 ; OK HKR, Responses, "1<cr>", 1, 02, 00, 00,00,00,00, 00,00,00,00 ; CONNECT HKR, Responses, "4<cr>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; ERROR HKR, Responses, "3<cr>", 1, 04, 00, 00,00,00,00, 00,00,00,00 ; NO CARRIER HKR, Responses, "6<cr>", 1, 05, 00, 00,00,00,00, 00,00,00,00 ; NO DIALTONE HKR, Responses, "7<cr>", 1, 06, 00, 00,00,00,00, 00,00,00,00 ; BUSY HKR, Responses, "8<cr>", 1, 07, 00, 00,00,00,00, 00,00,00,00 ; NO ANSWER HKR, Responses, "2<cr>", 1, 08, 00, 00,00,00,00, 00,00,00,00 ; RING HKR, Responses, "<cr><lf>OK<cr><lf>", 1, 00, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>CONNECT<cr><lf>", 1, 02, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>ERROR<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>NO CARRIER<cr><lf>", 1, 04, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>NO DIALTONE<cr><lf>", 1, 05, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>BUSY<cr><lf>", 1, 06, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>NO ANSWER<cr><lf>", 1, 07, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>RING<cr><lf>", 1, 08, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>BLACKLISTED<cr><lf>", 1, 1c, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>DELAYED ", 1, 1d, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>+FCERROR<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>+F4<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>FAX<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>DATA<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>VOICE<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>+FCON<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>CARRIER 300<cr><lf>", 1, 01, 00, 2c,01,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>CARRIER 1200<cr><lf>", 1, 01, 00, b0,04,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>CARRIER 2400<cr><lf>", 1, 01, 00, 60,09,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>CARRIER 4800<cr><lf>", 1, 01, 00, c0,12,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>CARRIER 7200<cr><lf>", 1, 01, 00, 20,1c,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>CARRIER 9600<cr><lf>", 1, 01, 00, 80,25,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>CARRIER 12000<cr><lf>", 1, 01, 00, e0,2e,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>CARRIER 14400<cr><lf>", 1, 01, 00, 40,38,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>CARRIER 16800<cr><lf>", 1, 01, 00, a0,41,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>CARRIER 19200<cr><lf>", 1, 01, 00, 00,4b,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>CARRIER 21600<cr><lf>", 1, 01, 00, 60,54,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>CARRIER 24000<cr><lf>", 1, 01, 00, c0,5d,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>CARRIER 26400<cr><lf>", 1, 01, 00, 20,67,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>CARRIER 28800<cr><lf>", 1, 01, 00, 80,70,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>CARRIER 31200<cr><lf>", 1, 01, 00, e0,79,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>CARRIER 33600<cr><lf>", 1, 01, 00, 40,83,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>CARRIER 75TX/1200RX<cr><lf>", 1, 01, 00, b0,04,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>CARRIER 1200TX/75RX<cr><lf>", 1, 01, 00, b0,04,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>COMPRESSION: NONE<cr><lf>", 1, 01, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>COMPRESSION: CLASS 5<cr><lf>", 1, 01, 01, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>COMPRESSION: V.42BIS<cr><lf>", 1, 01, 01, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>PROTOCOL: NONE<cr><lf>", 1, 01, 00, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>PROTOCOL: LAP-M<cr><lf>", 1, 01, 02, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>PROTOCOL: ALT<cr><lf>", 1, 01, 02, 00,00,00,00, 00,00,00,00 HKR, Responses, "<cr><lf>PROTOCOL: ALT-CELLULAR<cr><lf>", 1, 01, 0a, 00,00,00,00, 00,00,00,00 ; if s95=46: responses DTE speed without error correction HKR, Responses, "<cr><lf>CONNECT 1200<cr><lf>", 1, 02, 00, 00,00,00,00, b0,04,00,00 HKR, Responses, "<cr><lf>CONNECT 2400<cr><lf>", 1, 02, 00, 00,00,00,00, 60,09,00,00 HKR, Responses, "<cr><lf>CONNECT 4800<cr><lf>", 1, 02, 00, 00,00,00,00, c0,12,00,00 HKR, Responses, "<cr><lf>CONNECT 9600<cr><lf>", 1, 02, 00, 00,00,00,00, 80,25,00,00 HKR, Responses, "<cr><lf>CONNECT 19200<cr><lf>", 1, 02, 00, 00,00,00,00, 00,4b,00,00 HKR, Responses, "<cr><lf>CONNECT 38400<cr><lf>", 1, 02, 00, 00,00,00,00, 00,96,00,00 HKR, Responses, "<cr><lf>CONNECT 57600<cr><lf>", 1, 02, 00, 00,00,00,00, 00,e1,00,00 HKR, Responses, "<cr><lf>CONNECT 115200<cr><lf>", 1, 02, 00, 00,00,00,00, 00,c2,01,00 ; if s95=46: responses DTE speed with error correction HKR, Responses, "<cr><lf>CONNECT 1200/ARQ<cr><lf>", 1, 02, 02, 00,00,00,00, b0,04,00,00 HKR, Responses, "<cr><lf>CONNECT 2400/ARQ<cr><lf>", 1, 02, 02, 00,00,00,00, 60,09,00,00 HKR, Responses, "<cr><lf>CONNECT 4800/ARQ<cr><lf>", 1, 02, 02, 00,00,00,00, c0,12,00,00 HKR, Responses, "<cr><lf>CONNECT 9600/ARQ<cr><lf>", 1, 02, 02, 00,00,00,00, 80,25,00,00 HKR, Responses, "<cr><lf>CONNECT 19200/ARQ<cr><lf>", 1, 02, 02, 00,00,00,00, 00,4b,00,00 HKR, Responses, "<cr><lf>CONNECT 38400/ARQ<cr><lf>", 1, 02, 02, 00,00,00,00, 00,96,00,00 HKR, Responses, "<cr><lf>CONNECT 57600/ARQ<cr><lf>", 1, 02, 02, 00,00,00,00, 00,e1,00,00 HKR, Responses, "<cr><lf>CONNECT 115200/ARQ<cr><lf>", 1, 02, 02, 00,00,00,00, 00,c2,01,00Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.