1. infiles.zip Driver
2. MDMSECDY.INF File Contents

MDMSECDY.INF Driver File Contents (infiles.zip)

; Windows Modem Setup File
; Copyright (c) 1993-1996 Microsoft Corporation
; Manufacturer: Security Dunamics
; Supports AT&T Comsphere and others
;
; Security Dynamics  devices are inserted between an external modem and the 
; PC. They can be treated as the external modem with the following restrictions:
;    1. The DCE<->DTE rate and Connection rate are locked at 19200
;    2. The connect response from the modem is eaten up by the device. This is
;        a big nuisance and RAS worked around it by hardcoding responses
;        corresponding to the packets from known protocols.
;    2. Compression should be disabled.
;
;[SD ACM400 w/ AT&T 3820]
;
;This entry uses the Security Dynamics ACM/400 with the
;AT&T Comsphere 3820 modem. - done
; two devices - done
;The macro definitions, <xxx_xx>=, and COMMAND_INIT= lines must be
;changed in order to use other modems with the ACM/400.
;Set ACM/400 ports to fixed 19200 bps (not autobaud).
;Do not use Destination IDs with ACM/400 accounts.



;-------------------------

[Version]
LayoutFile=layout.inf, layout1.inf, layout2.inf
CatalogFile=mdmsecdy.cat
Signature="$CHICAGO$"
Class=Modem
ClassGUID={4D36E96D-E325-11CE-BFC1-08002BE10318}
Provider=%SecurityDynamics%


[Manufacturer]
%SecurityDynamics%   = SecurityDynamics


[SecurityDynamics]
%SecurityDynamics1% = SecurityDynamics1, SecDy_SD1   


; Installation sections

[SecurityDynamics1] 
AddReg=All, Common, SecurityDynamics1.AddReg, att_responses, EXTERNAL

;AddReg sections

[SecurityDynamics1.AddReg] 
; uses comsphere 3820
HKR,, Properties, 1, 80,01,00,00, ff,00,00,00, ff,00,00,00, 07,00,00,00, 07,00,00,00, 37,03,00,00, 00,4b,00,00, 40,38,00,00
HKR, Settings, ErrorControl_On,, "\N5"
HKR, Settings, ErrorControl_Forced,, "\N4"

[Strings]
SecurityDynamics  ="Security Dynamics"
SecurityDynamics1 ="Security Dynamics with AT&T 3820"

[All]
HKR,,FriendlyDriver,,unimodem.vxd
HKR,,DevLoader,,*vcomm
HKR,,PortSubClass,1,02
HKR,,ConfigDialog,,modemui.dll
HKR,,EnumPropPages,,"modemui.dll,EnumPropPages"
HKR, Init, 1,, "AT<cr>"
HKR, Responses, "<cr><lf>OK<cr><lf>", 1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>ERROR<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00

[EXTERNAL]
HKR,, DeviceType, 1, 01

[Common]
; uses comsphere 3820
HKR,, InactivityScale, 1, 3c,00,00,00
; original comsphere from Win95
; HKR, Init, 2,, "AT &F S0=0 &D2 E0 V1<cr>"
 HKR, Init, 2,, "AT&F&C1&D2 V1 X7 S0=0 S2=128 S7=55<cr>"
HKR, Monitor, 1,, "ATS0=1<cr>"
HKR, Monitor, 2,, "None"
HKR, Hangup, 1,, "ATH<cr>"
HKR, Answer, 1,, "None"
HKR,, Reset,, "AT&F<cr>"
HKR, Settings, Prefix,, "AT"
HKR, Settings, Terminator,, "<cr>"
HKR, Settings, DialPrefix,, "D"
HKR, Settings, DialSuffix,, ""            ; disabled
HKR, Settings, SpeakerVolume_Low,, "L0"
HKR, Settings, SpeakerVolume_Med,, "L2"
HKR, Settings, SpeakerVolume_High,, "L3"
HKR, Settings, SpeakerMode_Off,, "M0"
HKR, Settings, SpeakerMode_Dial,, "M1"
HKR, Settings, SpeakerMode_On,, "M2"
HKR, Settings, FlowControl_Off,, "\Q0"
HKR, Settings, FlowControl_Hard,, "\Q3"
HKR, Settings, FlowControl_Soft,, "\Q1"
HKR, Settings, ErrorControl_On,, "\N7"
HKR, Settings, ErrorControl_Off,, "\N1"
HKR, Settings, ErrorControl_Forced,, "\N6"
HKR, Settings, Compression_On,, "%%C1""H3"
HKR, Settings, Compression_Off,, "%%C0""H0"
HKR, Settings, Modulation_CCITT,, "B0 "
HKR, Settings, Modulation_Bell,, "B1 "
HKR, Settings, Pulse,, "P"
HKR, Settings, Tone,, "T"
HKR, Settings, Blind_Off,, "X4"
HKR, Settings, Blind_On,, "X3"
HKR, Settings, CallSetupFailTimer,, "S7=<#>"
HKR, Settings, InactivityTimeout,, "\T<#>"
HKR,, DCB, 1, 1C,00,00,00, 00,4B,00,00, 15,20,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00

[att_responses]
HKR, Responses, "<cr>",        1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<lf>",        1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>OK<cr><lf>",          1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>RING<cr><lf>",        1, 08, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO CARRIER<cr><lf>",  1, 04, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>ERROR<cr><lf>",       1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO DIALTONE<cr><lf>", 1, 05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>BUSY<cr><lf>",        1, 06, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO ANSWER<cr><lf>",   1, 07, 00, 00,00,00,00, 00,00,00,00

HKR, Responses, "OK",          1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "RING",        1, 08, 00, 00,00,00,00, 00,00,00,00
; We consider <hff> to be a ring response 
HKR, Responses, "<hff>",        1, 08, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "NO CARRIER",  1, 04, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "ERROR",       1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "NO DIALTONE", 1, 05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "NO DIAL TONE",1, 05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "BUSY",        1, 06, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "NO ANSWER",   1, 07, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "FAX",         1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "DATA",        1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "VOICE",       1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "RINGING",     1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "DELAYED",     1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "+FCERROR",    1, 03, 00, 00,00,00,00, 00,00,00,00
; we consider DIALIN to be a ring response
HKR, Responses, "DIALIN",        1, 08, 00, 00,00,00,00, 00,00,00,00
; we consider <h00> to be informational
HKR, Responses, "<h00>",        1, 01, 00, 00,00,00,00, 00,00,00,00