Additional Information
MM Pro 16III - 3D PnP Sound Card version 2.00
This file contains additional information and changes about the
various software that was not available at printing time.
Updated Windows 95 Audio Drivers
================================
These drivers are included under the sub-direcotry {\UPDATE} in Disk#1.
The drivers now support Full Duplex Operation, Windows Direct-X Sound,
as well as enhancements in Window's mixer controls.
To install the drivers, simply copy all the files from the Disk #1
directory {\UPDATE} over to the Disk #1's ROOT directory. Next, run
"A:\SETUP from Disk #1 to complete the software installation. You
need to restart the system to take effect of the changes after the
installation.
Note : This new driver has not passsed Microsoft Windows Hardware
Quality Labs (WHQL) logo testing.
Intel DOS Configuration Manager DWCFGMG.SYS
===========================================
Please note that on certain 486/Pentium machines with Phoenix BIOS
(PnP release 1.1A), if the EMM386.EXE specified with RAM or NOEMS option is
loaded together with the Intel DOS Configuration Manager DWCFGMG.SYS in the
CONFIG.SYS file, the system will reboot by itself upon startup. Please remove
any parameters if encounter this problem.
Installation on Win3.1x Platform
================================
For installing the audio drivers on Win3.1x, please run the ISA Configuration
Utility (ICU) first. The ICU helps to determine a working configuration that
does not conflict with other cards in the system. You can refer to the Easy
Start Manual for more details.
On Windows 3.1x Operating System, choose 'Run' from the 'File' menu. Insert
the Audio Installation Disk#1 into Drive A: (or Drive B:) and change the path to a:\setup (or
b:\setup). For more details, you can refer to the Easy Start Manual.
Installation on Windows 95 Platform
===================================
Start up Windows 95 Operating System. Windows 95 will then automatically
detects the AZT2320 PnP Sound Device and prompts a dialog box with the
option "Driver from disk provided by manufacturers" being highlighted.
Please insert the Audio Installation Disk#1 into Drive A: (or Drive B:)
and change the path to a:\ (or b:\) and click OK to install the
drivers. Windows 95 will then automatically proceed to detect all the other
logical devices.
Note: If you do not have Windows 95 Multimedia Applications installed
previously, system will prompt you to complete the installation of
the Multimedia Applications prior to the copying of the Audio Device
drivers. Just follow the on-screen instructions to complete the
installation of Multimedia Application and AZT2320 PnP Sound Drivers.
Next, please proceed to run 'A:\SETUP.EXE' from the PnP Audio Installation
Disk #1 to install the application software.
You might encounter some resource conflicts after loading the PnP
devices (especially when there are non-Plug & Play adaptors installed in
your system). Please refer to Trouble-shooting section in Windows 95 for
further details.
Upgrading from Win3.x to Win95 platform
=======================================
If you have set up your audio card on a Win3.x platform and want to upgrade
to Windows 95, remember to remove the audio drivers by doing a deinstallation
first. For more details, you can refer to the Appendix section in the User's
Manual.
Cards with 3D function
======================
If your card has 3D function, after installing SETUP or restarting from
Windows, you can activate the 3D function by clicking on the '3D' button
which is located on the audio mixer.
For Windows 3.x, the mixer can be found in the program group formed after
installation.
For Windows 95, the mixer can be found under the group name formed after
installation. This is in turn located under 'Programs' in the 'Start' menu.
The '3D' function can also be activated through the Microsoft Volume Control
Panel. This can be done by clicking on the default Microsoft 'Speaker' icon
located at the bottom right corner of the screen. Choose 'Options' and then
'Advanced Controls' from menu. Click on the 'Advanced' button and the 3D
sound effects can be chosen.
***********************************************************
* In case you encounter any problem with our products, *
* please quote the following model(s) when calling our *
* Technical Support : *
* Flamingo 16-3D Sound Card *
***********************************************************
------- The End ---------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.