D-Link DE-660+ Ethernet PC Card Installation for Packet Driver Contents ÄÄÄÄÄÄÄÄ Introduction User's Guide Introduction ÄÄÄÄÄÄÄÄÄÄÄÄ Packet drivers are general drivers used by many operating systems, especially TCP/IP software packages. If the network system that is installed specifically mentions support for packet drivers, it is likely that it will be able to the provided packet driver without problems. The most important thing to remember when installing packet driver is the software interrupt vector. The default interrupt vector for D-Link DE-660+ Ethernet PC Card packet drivers is 0x62 hexadecimal. Most network operating system supporting packet drivers will try to automatically search for packet drivers already loaded in the computer's memory. However, some packages will require a provided interrupt vector for the packet driver. Furthermore, some packages can only work with certain interrupt vectors, which require a software interrupt vector parameter when loading. Please see the section at the end of this document for description on packet driver parameters. Since the D-Link DE-660+ Ethernet PC Card is software configurable, the packet driver will automatically detect the hardware parameters. If the packet driver can properly read the adapter's MAC address during loading, then the hardware is normally working properly. File Description ------------ ------------------------------------------- PCTCP.TXT PC/TCP installation text file User's Guide ÄÄÄÄÄÄÄÄÄÄÄÄ DE660PPD.COM [-option] <packet_int_no> <irq> <iobase> <slot_no> Packet Driver Parameters: <packet_int_no> is the software interrupt vector number used by the packet driver program. This can be from 96 to 128. [-option] includes the following: -? Show available parameters. -d Delay Initial - The driver program will not initialize the network interface card until the packet driver program is accessed by its upper layer program. -u Unload the packet driver.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.