Using Olivetti Printer Driver
Microsoft(R) Windows(R) 95
This diskette incorporates the printer driver for the Olivetti Printer to
be used in Microsoft Windows 95. This [\WIN95DRV] directory now includes
the DM 824 printer driver file.
For install action of the printer driver, the following files are needed.
So please prepare the Windows 95 system disk or CD-ROM.
ICONLIB.DLL,
UNIDRV.DLL,
UNIDRV.HLP
As for installing the printer driver and setting the Printer, refer to the
following:
<<<<< Installing the Printer Driver >>>>>
1. Click the <Start> button.
2. Point the <Setting> menu.
3. Click the <Printers> menu.
4. In the Printers Window, double-click the < Add Printer> icon.
5. In the Add Printer wizard, click the <NEXT> button.
6. Click the < Have disk...> button¤ and select the path "A:\win95drv"
for the dialog box "Copy manufactures files from:".
7. Choose <OK> button.
8. For instructions on how to configure your printer, please see Microsoft
Windows 95 User's Manual.
<<<<< Setting the Printer >>>>>
1. Setup the paper form.
From the < Printer Setup > dialog box, choose the paper form from the
following list.
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ Source ³ Name ³
ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´
³ ³ ³
³ Front Tractor ³ Fanfold ( 15 x n in ) ³
³ Rear Tractor ³ Fanfold ( 10 x n in ) ³
³ ³ ( n = 2 - 16.5 ) ³
³ ³ ³
ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´
³ ³ ³
³ ³ Letter ( P:8.5 x 11 in ) ³
³ Manual ³ Legal ( P:8.5 x 14 in ) ³
³ CSF ³ A3 ( P:297 x 420 mm ) ³
³ ³ A4 ( P:210 x 297 mm ) ³
³ ³ A5 ( P:148 x 210 mm ) ³
³ ³ Half Letter ( P:5.5 x 8.5 in ) ³
³ ³ Executive ( P:7.25 x 10.5 in ) ³
³ ³ Government Legal ( P:8.5 x 13 in ) ³
³ ³ Government Letter ( P:8 x 10.5 in ) ³
³ ³ Ledger ( P:11 x 17 in ) ³
³ ³ F4 ( P:210 x 330 mm ) ³
³ ³ Post Card ( P:100 x 148 mm ) ³
³ ³ Com-6 ( P:92 x 165 mm ) ³
³ ³ Com-10 ( P:104 x 241 mm ) ³
³ ³ Monarch ( P:90 x 190 mm ) ³
³ ³ DL ( P:110 x 220 mm ) ³
³ ³ C5 ( P:162 x 299 mm ) ³
³ ³ User Defined Size ³
³ ³ ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
The documents formatted in non-supported sizes may print incorrectly.
In these instances, adjust the top, bottom, left and right of margin on
setup menu for your own printer. This should solve the problem.
2. How to set the printer to the factory function setting.
Key function explanations
The four arrow symbols used in the sentences below are as follows:
<- : Left arrow. Same as "EJECT/LOAD" key.
-> : Right arrow. Same as "FORM FEED" key.
^ : Up arrow. Same as "LINE FEED" key.
v : Down arrow. Same as "REVERSE LF" key.
When the four keys LINE FEED, EJECT/LOAD, PAPER PATH and PAPER FORM are
pressed at the same time when the power is in, the printer is set to the
factory setting.
3. How to identified of the option installed mode.
(1) While keeping pressed the "ALT" Key, press the "SETUP" switch to enter
the extended setup mode.
(2) Press the "->" or "<-" key to indicate the "60 OPTION" on the LCD
display.
(3) Use the "^" or "v" key to select option setting, press the "ENTER"
key.
(4) Press the "SETUP" key to exit from the setup mode.
4. How to set the paper size and paper feed method.
(1) The paper size and paper feed method are automatically set by software.
(2) When you select the User Defined Size:
Select the larger size paper than your using paper by the setup
mode "4 PAGE LENGTH".
Set the application software so that the print area can not exceed
your using paper.
Note. Microsoft is a registered trademark of Microsoft Corporation.
Windows is a registrered trademark of Microsoft Corporation.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.