; ODIDEC.INF ; ; Digital Equipment Corp. Network Interface Cards. ; ; Copyright 1995, Novell Inc. ;*********************************************************************** ;* Version Section * ;*********************************************************************** [version] Layoutfile=nllayout.inf signature="$CHICAGO$" Class=Net provider=%V_N% ;*********************************************************************** ;* Manufacturer Section * ;*********************************************************************** [Manufacturer] %V_DEC%=DEC ;*********************************************************************** ;* Manufacture Name section * ;*********************************************************************** [DEC] %*DECEWK3.DeviceDesc%=*DECEWK3.ndi, *pnp80f0 ;DEC Etherworks 3 (ISA) ;*********************************************************************** ;* INF Install Section * ;*********************************************************************** ;**************************************************************************** ; *DECEWK3 EtherWorks 3 ; (one logical configuration per possible memory mode) ;**************************************************************************** [*DECEWK3.ndi] AddReg=*DECEWK3.ndi.reg,EWRK3.ndi.reg,Gen1.HWResources,ODI.Common.CFG.reg LogConfig=*DECEWK3.LogConfig.2,*DECEWK3.LogConfig.32,*DECEWK3.LogConfig.64 [*DECEWK3.ndi.reg] HKR,Ndi,DeviceID,,"*pnp80f0" ;*********************************************************************** ;* Added Registry * ;*********************************************************************** ;**************************************************************************** ; Common ISA/EISA Etherworks 3 Registry Parameter Sections ;**************************************************************************** ;[EWRK3.ndi.reg] HKR,,DevLoader,,*odiload HKR,,EnumPropPages,,"netdi.dll,EnumPropPages" HKR,Ndi,NdiInstaller,,"odipage.dll,OdiNdiProc" ; Interfaces HKR,Ndi\Interfaces,DefUpper,,"odinsup,novellodi32" HKR,Ndi\Interfaces,DefLower,,"ethernet" HKR,Ndi\Interfaces,UpperRange,,"odinsup,novellodi32" HKR,Ndi\Interfaces,LowerRange,,"ethernet" ; Install sections HKR,Ndi\Install,"16 Bit",,"EWRK3.ODI16.install" HKR,Ndi\Install,"32 Bit",,"EWRK3.ODI32.install" ; Remove section HKR,Ndi\Remove,"16 Bit",,"EWRK3.ODI16.Remove" ; ODI 16 Bit info HKR,"ODI\16 Bit",ModulePath,,"%24%%DRIVER_32_PATH%" HKR,"ODI\16 Bit",Modules,,"LSLC32.NLM,PC32MLID.LAN" HKR,"ODI\16 Bit",DriverPath,,"%24%%DRIVER_16_PATH%" HKR,"ODI\16 Bit",FileName,,"EWRK3.com" HKR,"ODI\16 Bit",NetcfgPath,,"%24%%DRIVER_16_PATH%" HKR,"ODI\16 Bit",NetcfgFileName,,"Net.cfg" HKR,"ODI\16 Bit",LinkDriver,,"EWRK3" ; ODI 32 Bit Info HKR,"ODI\32 Bit",ModulePath,,"%24%%DRIVER_32_PATH%" HKR,"ODI\32 Bit",Modules,,"LSLC32.NLM,CMSM.NLM,ETHERTSM.NLM" HKR,"ODI\32 Bit",DriverPath,,"%24%%DRIVER_32_PATH%" HKR,"ODI\32 Bit",FileName,,"EWRK3.lan" ; MemoryMode HKR,NDI\params\MEM,ParamDesc,,"Memory Window Size" HKR,NDI\params\MEM,default,,2 HKR,NDI\params\MEM,type,,enum HKR,NDI\params\MEM\enum,2,,"2K/Configuration Type 0" HKR,NDI\params\MEM\enum,32,,"32K/Configuration Type 1" HKR,NDI\params\MEM\enum,64,,"64K/Configuration Type 2" HKR,NDI\params\MEM,flag,1,20,00,00,00 ;**************************************************************************** ; Device specific parameters ;**************************************************************************** ;Board with TP media only [tp.ndi.reg] ;ConnectionType HKR,Ndi\params\ConnectionType,ParamDesc,,"Connection Type" HKR,Ndi\params\ConnectionType,default,,2 HKR,Ndi\params\ConnectionType,type,,enum HKR,Ndi\params\ConnectionType\enum,2,,"Twisted_Pair" HKR,Ndi\params\ConnectionType\enum,3,,"TP Full_Duplex" HKR,Ndi\params\ConnectionType\enum,4,,"TP No_Link_Test" HKR,NDI\params\ConnectionType,flag,1,20,00,00,00 ;*********************************************************************** ;* .LogConfig Section * ;*********************************************************************** ;**************************************************************************** ; *DECEWK3 EtherWorks 3 ; (one logical configuration per possible memory mode) ;**************************************************************************** [*DECEWK3.LogConfig.32] ; 32K mapped memory mode ConfigPriority=HARDRECONFIG IOConfig=20@100-3FF%FFE0(3FF::) IRQConfig=5,10,11,15 MemConfig=8000@A0000-FFFFF%FFFF8000 [*DECEWK3.LogConfig.2] ; 2K mapped memory mode ConfigPriority=HARDRECONFIG IOConfig=20@100-3FF%FFE0(3FF::) IRQConfig=5,10,11,15 MemConfig=800@A0000-FFFFF%FFFFF800 [*DECEWK3.LogConfig.64] ; 64K mapped memory mode ConfigPriority=HARDRECONFIG IOConfig=20@100-3FF%FFE0(3FF::) IRQConfig=5,10,11,15 MemConfig=10000@A0000-FFFFF%FFFF0000 ;### ;*********************************************************************** ;* Install section * ;*********************************************************************** ; Install ODI 16 ;*********************************************************************** [EWRK3.ODI16.install] CopyFiles=EWRK3.ODI16.CopyFiles UpdateAutoBat=EWRK3.ODI16.autobat [EWRK3.ODI16.autobat] CmdAdd=LSL.COM, "-c=%24%%DRIVER_16_PATH%NET.CFG" CmdAdd=NESL.COM CmdAdd=EWRK3.com ;*********************************************************************** ; Install ODI 32 ;*********************************************************************** ;*********************************************************************** [EWRK3.ODI32.install] CopyFiles=EWRK3.ODI32.CopyFiles UpdateAutoBat=EWRK3.ODI32.autobat [EWRK3.ODI32.autobat] CmdDelete=LSL CmdDelete=NESL CmdDelete=EWRK3 ;*********************************************************************** ;* remove sections * ;*********************************************************************** ;*********************************************************************** [EWRK3.ODI16.Remove] UpdateAutoBat=EWRK3.ODI16.AutoBatRemove [EWRK3.ODI16.AutoBatRemove] CmdDelete=LSL CmdDelete=NESL CmdDelete=EWRK3 ;.com ;*********************************************************************** ;* Param Section * ;*********************************************************************** [Slot] ;Slot Number HKR,Ndi\params\slotnumber,ParamDesc,,"Adapter Slot Number" HKR,Ndi\params\slotnumber,type,,int HKR,Ndi\params\slotnumber,default,,1 HKR,Ndi\params\slotnumber,min,,1 HKR,Ndi\params\slotnumber,max,,8 HKR,Ndi\params\slotnumber,step,,1 HKR,Ndi\params\slotnumber,optional,,1 HKR,NDI\params\slotnumber,flag,1,20,00,00,00 ;*********************************************************************** ; General Ethernet Frame-Type params ;*********************************************************************** [ODI.Common.CFG.reg] ; First Logical Board HKR,Ndi\params\Frame1,ParamDesc,,"1. Frame Type" HKR,Ndi\params\Frame1,default,,1 HKR,Ndi\params\Frame1,type,,enum HKR,Ndi\params\Frame1,optional,,0 HKR,Ndi\params\Frame1\enum,1,,"Ethernet_802.2" HKR,Ndi\params\Frame1\enum,2,,"Ethernet_SNAP" HKR,Ndi\params\Frame1\enum,3,,"Ethernet_II" HKR,Ndi\params\Frame1\enum,4,,"Ethernet_802.3" ; Second Logical Board HKR,Ndi\params\Frame2,ParamDesc,,"2. Frame Type" HKR,Ndi\params\Frame2,default,,2 HKR,Ndi\params\Frame2,type,,enum HKR,Ndi\params\Frame2,optional,,0 HKR,Ndi\params\Frame2\enum,1,,"Ethernet_802.2" HKR,Ndi\params\Frame2\enum,2,,"Ethernet_SNAP" HKR,Ndi\params\Frame2\enum,3,,"Ethernet_II" HKR,Ndi\params\Frame2\enum,4,,"Ethernet_802.3" HKR,Ndi\params\Frame2\enum,5,,"Not used" ; Third Logical Board HKR,Ndi\params\Frame3,ParamDesc,,"3. Frame Type" HKR,Ndi\params\Frame3,default,,3 HKR,Ndi\params\Frame3,type,,enum HKR,Ndi\params\Frame3,optional,,0 HKR,Ndi\params\Frame3\enum,1,,"Ethernet_802.2" HKR,Ndi\params\Frame3\enum,2,,"Ethernet_SNAP" HKR,Ndi\params\Frame3\enum,3,,"Ethernet_II" HKR,Ndi\params\Frame3\enum,4,,"Ethernet_802.3" HKR,Ndi\params\Frame3\enum,5,,"Not used" ; Fourth Logical Board HKR,Ndi\params\Frame4,ParamDesc,,"4. Frame Type" HKR,Ndi\params\Frame4,default,,4 HKR,Ndi\params\Frame4,type,,enum HKR,Ndi\params\Frame4,optional,,0 HKR,Ndi\params\Frame4\enum,1,,"Ethernet_802.2" HKR,Ndi\params\Frame4\enum,2,,"Ethernet_SNAP" HKR,Ndi\params\Frame4\enum,3,,"Ethernet_II" HKR,Ndi\params\Frame4\enum,4,,"Ethernet_802.3" HKR,Ndi\params\Frame4\enum,5,,"Not used" ; Node Address Override HKR,Ndi\params\"Node Address",ParamDesc,,"Node Address Override" HKR,Ndi\params\"Node Address",type,,edit HKR,Ndi\params\"Node Address",LimitText,,18 HKR,Ndi\params\"Node Address",UpperCase,,1 HKR,Ndi\params\"Node Address",default,,"" HKR,Ndi\params\"Node Address",flag,1,20,00,00,00 HKR,Ndi\params\"Node Address",optional,,1 ; Help section HKR,Ndi,HelpText,,%ODIMLID_HELP% ;*********************************************************************** ;* Resource Section * ;*********************************************************************** [Gen.HWResources] ; Resources HKR,,IRQ,1,04,00,00,00 HKR,,Port,1,02,00,00,00 HKR,,MEM,1,01,00,00,00 HKR,NDI\params\IRQ,resc,1,04,00,00,00 HKR,NDI\params\IRQ,ParamDesc,,"IRQ Level" HKR,NDI\params\Port,resc,1,02,00,00,00 HKR,NDI\params\Port,ParamDesc,,"I/O Base Address" HKR,NDI\params\Port,flag,1,30,00,00,00 HKR,NDI\params\MEM,resc,1,01,00,00,00 HKR,NDI\params\MEM,ParamDesc,,"Memory Base Address" HKR,NDI\params\MEM,paragraph,,1 HKR,NDI\params\MEM,flag,1,30,00,00,00 [Gen.IRQ2.HWResources] ; Resources HKR,NDI\params\Interrupt,flag,1,70,00,00,00 [Gen1.HWResources] ; Resources HKR,,MEM1,1,01,00,00,00 HKR,,Port1,1,02,00,00,00 HKR,,IRQ1,1,04,00,00,00 HKR,NDI\params\MEM1,resc,1,01,00,00,00 HKR,NDI\params\MEM1,ParamDesc,,"Memory Base Address" HKR,NDI\params\MEM1,flag,1,20,00,00,00 HKR,NDI\params\Port1,resc,1,02,00,00,00 HKR,NDI\params\Port1,ParamDesc,,"I/O Base Address" HKR,NDI\params\Port1,flag,1,20,00,00,00 HKR,NDI\params\IRQ1,resc,1,04,00,00,00 HKR,NDI\params\IRQ1,ParamDesc,,"IRQ Level" HKR,NDI\params\IRQ1,flag,1,20,00,00,00 HKR,NDI\params\MEM2,resc,1,01,00,00,00 HKR,NDI\params\MEM2,ParamDesc,,"Memory Base Address" HKR,NDI\params\MEM2,paragraph,,1 HKR,NDI\params\MEM2,flag,1,10,00,00,00 HKR,NDI\params\PORT2,resc,1,02,00,00,00 HKR,NDI\params\PORT2,ParamDesc,,"I/O Base Address" HKR,NDI\params\PORT2,flag,1,10,00,00,00 HKR,NDI\params\IRQ2,resc,1,04,00,00,00 HKR,NDI\params\IRQ2,ParamDesc,,"IRQ Level" HKR,NDI\params\IRQ2,flag,1,10,00,00,00 ;*********************************************************************** ;* Copy file sections * ;*********************************************************************** ; Install ODI 16 ;*********************************************************************** [EWRK3.ODI16.CopyFiles] EWRK3.com,,,5 lsl.com,,,5 nesl.com,,,5 ;LSL.msg,,,5 ;NESL.msg,,,5 ;*********************************************************************** ; Install ODI 32 ;*********************************************************************** ;*********************************************************************** [EWRK3.ODI32.CopyFiles] EWRK3.lan,,,5 ;*********************************************************************** ;* Destination Directories * ;*********************************************************************** [DestinationDirs] DefaultDestDir =11 ; LDID_SYS EWRK3.ODI16.CopyFiles =24,novell\nwclient EWRK3.ODI32.CopyFiles =24,novell\client32 ;*********************************************************************** ;* Localizable Strings * ;*********************************************************************** [strings] ; Provider V_N=" Novell" ; Manufacturers V_DEC="Digital Equipment" ; Driver Paths DRIVER_16_PATH="novell\nwclient\" DRIVER_32_PATH="novell\client32\" ; Context help ODIMLID_HELP="The Novell ODI driver enables you to use either 16-Bit or 32-Bit networking components." ; PNP Devices *DECEWK3.DeviceDesc="DEC Etherworks 3 (All ISA versions)"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.