1. j3239a.exe Driver
2. README.TXT File Contents

README.TXT Driver File Contents (j3239a.exe)

                  SOFTWARE INSTALLATION INSTRUCTIONS
              FOR FTP PC/TCP VERSION 2.x NDIS 2.01 DRIVER
             HP J3239A DeskDirect EL-10 ISA Combo Adapter
 
 
 ======================
 INSTALLATION PROCEDURE
 ======================
 
 1. Install FTP PC/TCP for DOS/Windows software.  Follow the
    installation manual provided with the FTP PC/TCP.  The remainder of
    these instructions assume it is installed in C:\FTP.
 
    Select the "DIX Ethernet" driver (ETHDRV) as the PC/TCP kernel.
 
 
 2. Insert the Support Disk for H3239A into the floppy drive, and copy
    the NDIS-2 driver to the directory where the FTP PC/TCP software is 
    installed.  For example:
 
       copy a:\ndis2\dos\hpeind.dos c:\ftp
 
 
 3. Copy the PC/TCP NDIS support files from the FTP DOS/Windows diskette
    to the directory where the FTP PC/TCP software is installed.  For
    example:
 
       copy a:\protman.dos c:\ftp
       copy a:\protman.exe c:\ftp
       copy a:\netbind.com c:\ftp
 
    Make sure the PC/TCP packet driver to NDIS driver converter module
    DIS_PKT.GUP is also in the same directory (C:\FTP).
 
 
 4. Update configuration files.  For example:
 
    AUTOEXEC.BAT file:
 
       ...
       SET PCTCP=C:\FTP\PCTCP.INI
       C:\FTP\NETBIND
       C:\FTP\ETHDRV
       ...
 
    CONFIG.SYS file:
 
       DEVICE = C:\FTP\PROTMAN.DOS /I:C:\FTP
       DEVICE = C:\FTP\HPEIND.DOS
       DEVICE = C:\FTP\DIS_PKT.DOS
 
    PROTOCOL.INI file:
 
       [PROTMAN]
       DRIVERNAME = PROTMAN$
 
       [PKTDRV]
       drivername = PKTDRV$
       intvec = 0x60
       bindings = HPEIND_NIF           <--- Add this line
 
       [HPEIND_NIF]
       DRIVERNAME = HPEIND$
 
 
   5. Reboot the computer.
 
      The FTP PC/TCP software and changes made to PROTOCOL.INI,
      CONFIG.SYS and AUTOEXEC.BAT will only then take effect.
 
<End of File>