Banyan Vines Installation ****************************************************** * How to install PCIND.DOS on Banyan VINES v4.00(2) * ****************************************************** NOTE : To install PCI Ethernet adapter NDIS driver program, you need Banyan VINES v4.00(2) or above. Location of driver : \NDIS\DOS\LAN_S4\PCIND.DOS 1. Create a bootable diskette (booted with DOS 3.1 or above) which will be used as boot diskette of Banyan VINES workstation or create a sub- directory on your hard disk. There are two methods to copy the required files for Banyan VINES workstation to the bootable diskette or sub-directory of hard disk. Method 1. 1) Execute 'INSTALL' command which was saved in the diskette labeled "VINES MASTER DISK". 2) Follow the instructions to copy the files to the bootable diskette or sub-directory of hard disk. Method 2. 1) Execute 'BAN' command. 2) Login VINES system. 3) Execute 'PCCOPY' command. 4) Select 'NDIS Ethernet' item and follow instructions as menu driven for copying the files to the bootable diskette or sub-directory of hard disk. 2. Insert the PCI Ethernet adapter driver program diskette in drive 'A' and insert the ard prepared bootable diskette in drive 'B'. Afterwards, copy the appropriate NDIS driver files PCIND.DOS from drive 'A' to 'B' or sub-directory of hard disk. 3. Create a CONFIG.SYS file which contains the following statements: DEVICE=PROTMAN.DOS /I:A:\ DEVICE=PCIND.DOS NOTE: " A:\" is the path which may be changed depending on the location of the files for Banyan VINES workstation. 4. Create a PCIND.NIF file and include the following statements in this file: Model = PCI Ethernet Adapter Path = A:\ DeviceDriver = PCIND.DOS DeviceName = PCIND$ Type = NDIS NOTE: " A:\" is the path which may be changed depending on the location of the files for Banyan VINES workstation. 5. Create a PROTOCOL.INI file as follows: [PROTOCOL MANAGER] drivername = PROTMAN$ [VINES_XIF] drivername = NDISBAN$ bindings = "PCIND" [ETHPCI] drivername = PCIND$ 6. Execute 'PCCONFIG' command 1) The "CONFIGURING A PC FOR THE NETWORK" is displayed on the screen then select item '1 - Network Card Settings'. | The "Network Card Setting" is displayed on the screen then select item 'NDIS Ethernet'. | The "NDIS Ethernet" is displayed on the screen then set your choice for ISA Plug and Play NIC Ex. Interrupt Level (2-15) : 3 PROTOCOL.INI bindings = PCIND | 2) Return to Screen "CONFIGURING A PC FOR THE NETWORK" then select item '2 - Login Environment Settings'. | The "Network Card Setting" is displayed on the screen then select item 'NDIS Ethernet'. | then 'PCCONFIG.DB' file will be generated. 7. Reboot your computer. 8. Login into VINES by executing the 'BAN' command.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.