==================================================================== ReleaseNote of SMCUTIL ===================================================================== /******************************************************************** 2004-04-28 label as "1.1.0.10" Ver:1.1.0.10 /******************************************************************** 1. Add wpa in utility. 2. take out the "confirm network key" in security page. 3 Add Passphrase in wep mode. 4. The channel survey page displays according to domain . /******************************************************************** * 2004-02-04 label as "1.0.0.10" Ver:1.0.0.10 /******************************************************************** 1. (Bug fixed) Utility Property under win98/me display error, fixed it. /******************************************************************** * 2003-11-06 label as "1.0.0.9" Ver:1.0.0.9 ********************************************************************/ 1. (Bug fixed)When connect a WEP network,it would reconnect continually. /******************************************************************** * 2003-10-20 label as "1.0.0.8" Ver:1.0.0.8 ********************************************************************/ 1. Modify: Driver version is shown as 3 section nums on about page. /******************************************************************** * 2003-05-13 label as "1.0.7" Ver:1.0.0.7 ********************************************************************/ 1. Modify: If set the SSID as blank or "any", then press Apply button, the connected SSID show blank. 2. Modify: change the "Advance" to "Advanced" Change the "Band Width" to "Bandwidth" /******************************************************************** * 2003-04-15 label as "1.0.0.6" Ver:1.0.0.6 ********************************************************************/ 1. Modify: The BandWidth not right. /******************************************************************** * 2003-04-11 label as "1.0.0.5" Ver:1.0.0.5 ********************************************************************/ 1. Problem: On WinMe,Enable DHCP function, Release and Renew buttons are invalid in the IP Information page. Solution: Enalbe those button on WinMe if enable DHCP. 2. Problem: On Win98, the logo of utility not show. Solution: Paint this logo when refresh background. 3. Problem: Errors when user change profile name. Solution: Modified. 4. Problem: On SiteSurvey page, If user double click one WEP Network, and select the "No" button of MessageBox. There will be one same profile add in profile list of config page. Solution: If user select "No", do nothing. 5. Problem: On Bandwidth dialog, it may paint out of frame. Solution: Modified. /******************************************************************** * 2003-04-03 label as "1.0.0.4" Ver:1.0.0.4 ********************************************************************/ 1. Modify: User can input ASCII key in WEP key EditBox. /******************************************************************** * 2003-03-28 label as "1.0.0.3" Ver:1.0.0.3 ********************************************************************/ 1. Modify: Modify UI, add "Advance" button in LinkInfo page, and add two page (BandWidth / Channel Survey)to show advance status. BandWidth: show the throughput of current NIC. Channel Survey: show the Noise of each Channel. /******************************************************************** * 2003-03-14 label as "1.0.0.2" Ver:1.0.0.2 ********************************************************************/ 1. Modify: User can modify the profile name. The new profile name replease the old one (Except : DEFAULT) 2. Modify: The UI not TopMost. /******************************************************************** * 2003-03-10 label as "1.0.0.1" Ver:1.0.0.1 ********************************************************************/ 1. Problem : If SSID is "ANY" or space, the card can't connect to any network. Solution: Checked. 2. Problem : Set Tx unsuccessfully. In the Link Information page, the current Tx can't correctly show until clicking Radio On and Radio Off buttons. Solution: Checked. /******************************************************************** * 2003-03-06 label as "1.0.0.0" Ver:1.0.0.0 ********************************************************************/ First version support XI-325, Modify from SMC 802.11G Utility.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.