;****************************************************************************************
;
; FILE:
; netr28u.inf
;
; DESCRIPTION:
; 802.11 Wireless Network Adapter inf file.
;
;**************************************************************************************
[Version]
Signature = "$Chicago$"
Class = Net
ClassGUID = {4d36e972-e325-11ce-bfc1-08002be10318}
Provider = %Provider%
Compatible = 1
CatalogFile = netr28u.cat ; For WHQL certification.
DriverVer = 08/15/2007, 2.01.00.0000
[ControlFlags]
;***********Ralink 802.11n board ***********
;ExcludeFromSelect = USB\VID_148F&PID_2870
[Manufacturer]
%Ralink% = Ralink
[Ralink]
; DisplayName Section DeviceID
; ----------- ------- --------
%Generic.DeviceDesc% = Ralink.ndi, USB\VID_157E&PID_300E
;*******************************************************************************************
; NT specific entries
;*******************************************************************************************
[Ralink.ndi.NT]
AddReg = Common.reg, RTUSB.ndi.NT.reg
Characteristics = 0x84 ; NCF_REMOVABLE | NCF_HAS_UI | NCF_PHYSICAL
BusType = 15 ; USB
CopyFiles = NT.CopyFiles
*IfType = 71 ; IF_TYPE_IEEE80211
*MediaType = 16 ; NdisMediumNative802_11
*PhysicalMediaType = 9 ; NdisPhysicalMediumNative802_11
; NT services sections
[Ralink.ndi.NT.Services]
AddService = netr28u, 2, Generic.Service, common.EventLog
;*******************************************************************************************
; common regs for NT
;*******************************************************************************************
[Common.reg]
;
; WirelessMode
;
HKR, , WirelessMode, 0, "3"
;
; Enable TX Burst
;
HKR, , TXBurst, 0, "1"
;
; Use Short Slot Time
;
HKR, , ShortSlot, 0, "1"
;
; Use Ofdm rate in adhoc mode
;
HKR, , AdhocOfdm, 0, "1"
;
; Radio On/Off
;
HKR, , Radio, 0, "0"
HKR, NDI\params\Radio, ParamDesc, 0, "Radio On/Off"
HKR, NDI\params\Radio, type, 0, "enum"
HKR, NDI\params\Radio, default, 0, "0"
HKR, NDI\params\Radio\enum, 1, 0, "Disable"
HKR, NDI\params\Radio\enum, 0, 0, "Enable"
;
; Channel
;
HKR, , Channel, 0, %CHANNEL%
HKR, Default, Channel, 0, %CHANNEL%
;
; Country Region G Band
;
HKR, , CountryRegion, 0, "0"
HKR, NDI\params\CountryRegion, ParamDesc, 0, "Country Region 11G"
HKR, NDI\params\CountryRegion, type, 0, "enum"
HKR, NDI\params\CountryRegion, default, 0, "0"
HKR, NDI\params\CountryRegion\enum, 0, 0, "(Channel 1 - 11)"
HKR, NDI\params\CountryRegion\enum, 1, 0, "(Channel 1 - 13)"
HKR, NDI\params\CountryRegion\enum, 2, 0, "(Channel 10 - 11)"
HKR, NDI\params\CountryRegion\enum, 3, 0, "(Channel 10 - 13)"
HKR, NDI\params\CountryRegion\enum, 4, 0, "(Channel 14)"
HKR, NDI\params\CountryRegion\enum, 5, 0, "(Channel 1 - 14)"
HKR, NDI\params\CountryRegion\enum, 6, 0, "(Channel 3 - 9)"
HKR, NDI\params\CountryRegion\enum, 7, 0, "(Channel 5 - 13)"
;
; Country Region A Band
;
HKR, , CountryRegionABand, 0, "0"
HKR, NDI\params\CountryRegionABand, ParamDesc, 0, "Country Region 11A"
HKR, NDI\params\CountryRegionABand, type, 0, "enum"
HKR, NDI\params\CountryRegionABand, default, 0, "0"
HKR, NDI\params\CountryRegionABand\enum,0, 0, "Ch(36 - 64,149 - 165)"
HKR, NDI\params\CountryRegionABand\enum,1, 0, "Ch(36 - 140)"
HKR, NDI\params\CountryRegionABand\enum,2, 0, "Ch(36 - 64)"
HKR, NDI\params\CountryRegionABand\enum,3, 0, "Ch(52 - 64,149 - 161)"
HKR, NDI\params\CountryRegionABand\enum,4, 0, "Ch(149 - 165)"
HKR, NDI\params\CountryRegionABand\enum,5, 0, "Ch(149 - 161)"
HKR, NDI\params\CountryRegionABand\enum,6, 0, "Ch(36 - 48)"
HKR, NDI\params\CountryRegionABand\enum,7, 0, "Ch(36 - 165)"
HKR, NDI\params\CountryRegionABand\enum,8, 0, "Ch(52 - 64)"
;
; RDG
;
HKR, , RDG, 0, "1"
HKR, NDI\params\RDG, ParamDesc, 0, "RDG"
HKR, NDI\params\RDG, type, 0, "enum"
HKR, NDI\params\RDG, default, 0, "1"
HKR, NDI\params\RDG\enum, 0, 0, "Disable"
HKR, NDI\params\RDG\enum, 1, 0, "Enable"
;
; HTCapable
;
HKR, , HTCapable, 0, "1"
HKR, NDI\params\HTCapable, ParamDesc, 0, "HT Capable"
HKR, NDI\params\HTCapable, type, 0, "enum"
HKR, NDI\params\HTCapable, default, 0, "1"
HKR, NDI\params\HTCapable\enum, 0, 0, "Disable"
HKR, NDI\params\HTCapable\enum, 1, 0, "Enable"
;
; Block ACK settings
;
HKR, , BACapability, 0x10001, "0x07034040"
HKR, Default, BACapability, 0x10001, "0x07034040"
;
; Transmit Rate setting
;
HKR, , TransmitSetting, 0x10001, "0x2ba15"
HKR, Default, TransmitSetting, 0x10001, "0x2ba15"
;
; WPS Device Name
;
HKR, , WPSDevName, 0, %WPS_DEVNAME_DEF_STR%
HKR, Default, WPSDevName, 0, %WPS_DEVNAME_DEF_STR%
[RemoveFlag.reg]
HKR, , SafelyRemoveOff, 0, "1"
;*******************************************************************************************
; DestinationDirs
;*******************************************************************************************
[NT.CopyFiles]
netr28u.sys,,,2
[SourceDisksNames]
1 = %INSTALL_DISK_STR%,,,
[SourceDisksFiles]
netr28u.sys = 1,,
[DestinationDirs]
NT.CopyFiles = 12 ; system32\drivers subdirectory on NT
DefaultDestDir = 11
;*******************************************************************************************
; NT specific
;*******************************************************************************************
[RTUSB.ndi.NT.reg]
HKR, Ndi, Service, 0, "netr28u"
HKR, Ndi\Interfaces, UpperRange, 0, "ndis5"
HKR, Ndi\Interfaces, LowerRange, 0, "wlan, ethernet"
[Generic.Service]
DisplayName = %Generic.Service.DispName%
ServiceType = 1 ;%SERVICE_KERNEL_DRIVER%
StartType = 3 ;%SERVICE_AUTO_START%
ErrorControl = 1 ;%SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\netr28u.sys
LoadOrderGroup = NDIS
[common.EventLog]
AddReg=common.AddEventLog.reg
[common.AddEventLog.reg]
HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll,%%SystemRoot%%\System32\drivers\netr28u.sys"
HKR, , TypesSupported, 0x00010001, 7
;*******************************************************************************************
; Strings
;*******************************************************************************************
[strings]
Provider = "SMC"
Ralink = "SMC"
Generic.DeviceDesc = "SMCWUSB-N Draft 11n USB2.0 Adapter"
INSTALL_DISK_STR = "Wireless 11n USB Installation Disk"
Generic.Service.DispName = "USB Wireless LAN Card Driver for Vista"
;
; Parameters
;
CHANNEL = "1"
WPS_DEVNAME_DEF_STR = "Ralink Client"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.