[Utility] AppTitle=SMC Wireless Client Utility ProductName=SMC Wireless Client Utility Copyright1=Copyright(C) 2007 SMC Networks Inc. Copyright2=All rights reserved ;DriverVer= ;UtilityVer= WEB= ;StrAdHocB ;StrAdHocG ;StrAdHocA [FormMain] MenuItAbout=About MenuItOpen=Open MenuItClose=Close [FormAbout] LbDriverVer=Driver Version: LbUtilityVer=Utility Version: LbMAC=MAC Address: BtnOk=OK [FormMsgBox] BtnOk=OK BtnCancel=Cancel BtnYes=Yes BtnNo=No [FormSelectNic] LbSelectNic=Select wireless lan card: LbHwId=Hardware ID: LbAddress=MAC Address: BtnOk=OK [FormNicUtility] LbStaInfo=Link Information LbStaSurvey=Site Survey LbStaProfile=Profile [TFrameStaLinkInfo] GBoxStatus=Wireless Network Status LbProfile=Profile Name: LbSSID=SSID: LbStatus=Link Status: LbNetType=Network Type: LbWlMode=Wireless Mode: LbChannel=Channel: LbTxRate=Transmit Rate: LbBSSID=BSSID: LbSignal=Signal Strength: GBoxSecurity=Security Status LbSecurity=Security: LbAuthen=Authentication: LbEncryp=Encryption: GBoxIP=TCP/IP Status LbIPAddr=IP Address: LbIPMask=Subnet Mask: LbGateway=Gateway: LbDNS=DNS Server: GBoxAntenna=Smart Antenna Status LbAlgState=Algorithm State: LbRemain=Beacons Remaining: LbRssi=Last Beacon RSSI: LbAntennaMode=Antenna Mode: LbLeft=Left LbOmni=Omni LbRight=Right BtnReset=Reset AlgState1=STARTUP AlgState2=INITIAL_SCAN AlgState3=SUSTAINED_USE AlgState4=PERIODIC_RESCAN GBoxChannel=Channel LbCtrlCh=Control Channel: LbExCh=Extension Channel: LbChWidth=Channel Width: [TFrameStaSurvey] GBoxSurvey=Available Networks LvSite_Col0= LvSite_Col1=SSID LvSite_Col2=Mode LvSite_Col3=Ch LvSite_Col4=Signal LvSite_Col5=Security LvSite_Col6=BSSID PlSearch=Searching... BtnRefresh=Refresh BtnConnect=Connect [TFrameStaProfile] GBoxProfile=Profile List LvProf_Col0= LvProf_Col1=Name LvProf_Col2=SSID GBoxInfo=Profile Information LbProfile=Profile Name: LbSSID=SSID: LbNetType=Network Type: LbChannel=Channel: LbSecurity=Security: LbAuthen=Authentication: LbEncryption=Encryption: BtnAdd=Add BtnEdit=Edit BtnDelete=Delete BtnImport=Import BtnExport=Export BtnConnect=Connect BtnWPS=WPS [FormSetProfileSta] BtnActLater=Activate Later BtnActNow=Activate Now BtnBack=Back BtnNext=Next BtnCancel=Cancel [TFrameSetStaNetType] GBoxGeneral=General Connection Settings LbProfile=Profile Name: LbSSID=SSID: BtnBrowse=Browse LbNetType=Network Type: [FormSiteSelect] GBoxSurvey=Available Networks PlSearch=Searching... LvSite_Col0= LvSite_Col1=SSID LvSite_Col2=Mode LvSite_Col3=Ch LvSite_Col4=Signal LvSite_Col5=Security LvSite_Col6=BSSID BtnRefresh=Refresh BtnSelect=Select [TFrameSetStaSecurity] GBoxSecurity=Wireless Security LbSecurity=Security: LbEncryption=Encryption: [TFrameSetStaWEP] GBoxWEP=Security Settings LbWEP=WEP: LbAuthen=Authentication: LbDefKey=Default Key: LbPhrase=Passphrase: LbKey1=Key 1: LbKey2=Key 2: LbKey3=Key 3: LbKey4=Key 4: [TFrameSetStaWPAPSK] GBoxWPAPSK=Security Settings LbPhrase=Passphrase: LbEncryption=Encryption: [TFrameSetStaConfirm] GBoxConfirm=Wireless Settings LbProfile=Profile Name: LbSSID=SSID: LbNetType=Network Type: LbWlMode=Wireless Mode: LbChannel=Channel: GBoxSecurity=Security Settings LbSecurity=Security: LbAuthen=Authentication: LbEncryption=Encryption: [FormRalinkWPS] GBoxWPS= PlSearch=Searching... LvNetwork_Col0= LvNetwork_Col1=SSID LvNetwork_Col2=BSSID LvNetwork_Col3=Ch LvNetwork_Col4=Security BtnRefresh=Refresh GBoxDevPin=Pin Code BtnPinRenew=Renew BtnDefault=Default BtnPIN=PIN BtnPBC=PBC ChkAssocIE=WPS Associate IE ChkProbIE=WPS Probe IE LbStatus= BtnClose=Close PBCStart=Start PBC connection PINStart=Start PIN connection PINErPinCode=Invaild Pin Code WPS_NOTUSED=WPS status is not used WPS_IDLE=WPS status is idled WPS_EAP_REQ_NACK_RECEIVED=Receive EAP-Req (NACK) WPS_SCAN_AP=Scanning AP WPS_START_ASSOC=Begin associating to WPS AP WPS_LINK_UP=Associated to WPS AP WPS_EAPOL_START_SENT=Sending EAPOL-Start WPS_EAP_RSP_ID_SENT=Sending EAP-Rsp(ID) WPS_EAP_REQ_START_RECEIVED=Receive EAPReq WPS_Start WPS_EAP_M1_SENT=Sending M1 WPS_EAP_M1_RECEIVED=Received M1 WPS_EAP_M2_RECEIVED=Received M2 WPS_EAP_M2_SENT=Sending M2 WPS_EAP_M2D_RECEIVED=Received M2D WPS_EAP_M2D_SENT=Sending M2D WPS_EAP_RSP_ACK_SENT=Sending EAP Response (ACK) WPS_EAP_M3_SENT=Sending M3 WPS_EAP_M3_RECEIVED=Received M3 WPS_EAP_M4_RECEIVED=Received M4 WPS_EAP_M4_SENT=Sending M4 WPS_EAP_M5_SENT=Sending M5 WPS_EAP_M5_RECEIVED=Received M5 WPS_EAP_M6_RECEIVED=Received M6 WPS_EAP_M6_SENT=Sending M6 WPS_EAP_M7_SENT=Sending M7 WPS_EAP_M7_RECEIVED=Received M7 WPS_EAP_M8_RECEIVED=Received M8 WPS_EAP_M8_SENT=Sending M8 WPS_EAP_RSP_DONE_SENT=Sending EAP Response (Done) WPS_EAP_REQ_DONE_RECEIVED=Received EAP Response (Done) WPS_EAP_CONFIGURED=Configured WPS_INVALID_SSID=Invalid SSID in PIN mode WPS_EAP_REQ_WRONG_SMI=Receive EAP-Req with wrong WPS SMI Vendor Id WPS_EAP_REQ_WRONG_VENDOR_TYPE=Receive EAP-Req with wrong WPS Vendor Type WPS_EAP_FAILED=WPS Eap process failed WPS_PBC_TOO_MANY_AP=Too many PBC AP available WPS_PBC_NO_AP=No PBC AP available WPS_EAP_FAIL_RECEIVED=Received EAP-FAIL WPS_EAP_NONCE_MISMATCH=Receive EAP with wrong NONCE WPS_EAP_INVALID_DATA=Receive EAP without integrity (Hmac mismatch) WPS_PASSWORD_MISMATCH=Error PIN Code (R-Hash mismatch) WPS_SUCC=WPS status is connected successfully WPS_FAIL=WPS status is disconnected WPS_DISCONNECT=WPS status is disconnected WPS_CONNECT=Connecting to WPS AP [FormRaWPSProf] GBoxWPSProfile= LbProfile=Profile Name: LbSSID=SSID: LbSecurity=Security: Authen=Authentication: Encryption=Encryption: LbKeyIndex=Key Index: LbKey=Key: BtnSave=Save [Message] NoAdapter=The adapter is not present. RemoveProf=Really remove "%s"? OverwriteProf=A profile with the name "%s" already exists.\nReplace it? ErEmyProfName=Profile Name can't be empty! ErSysProfName=This profile name is used by the system. Please enter a different name. ErSamProfName=%s already exists. Please enter another name. ErIllegalChar=The specified name contains illegal characters. ErEmySSID=SSID can't be empty! ErWEP64=The length of Key should be 5 or 10. Please re-enter Key. ErWEP128=The length of Key should be 13 or 26. Please re-enter Key. ErWEP152=The length of Key should be 16 or 32. Please re-enter Key. ErWEP256=The length of Key should be 29 or 58. Please re-enter Key. ErHex64=Shared key should be 10 hexadecimal digists. Please re-enter Key. ErHex128=Shared key should be 26 hexadecimal digists. Please re-enter Key. ErHex152=Shared key should be 32 hexadecimal digists. Please re-enter Key. ErHex256=Shared key should be 58 hexadecimal digists. Please re-enter Key. ErPassphrase=Passphrase should be between 8 to 63 characters in ASCII format. ErPassphraseHex=Passphrase should be 64 hex digits. [Common] Unknow=N/A None=None Auto=Auto NotUse=Not Use Enabled=Enabled Disabled=Disabled Signal=Signal Quality=Quality dBm=dBm Kbps=Kbps Mbps=Mbps GHz=GHz Connecting=Connecting... Connected=Connected DisConnected=Disconnected SignalNull=No Signal SignalPoor=Poor SignalGood=Good SignalVeryGood=Very Good SignalExcellent=Excellent Infrastructure=Infrastructure AdHoc=Ad-Hoc 802B=802.11b 802G=802.11g 802N=802.11n 802A=802.11a Security_None=Disabled Security_WEP=WEP Security_WPA=WPA Security_WPA_PSK=WPA-PSK Security_WPA_None=WPA-None Security_WPA2=WPA2 Security_WPA2_PSK=WPA2-PSK Security_WPA_Auto=WPA/WPA2 Security_WPA_Auto_PSK=WPA-PSK/WPA2-PSK Security_8021x=802.1x Security_LEAP=LEAP AuthModeOpen=Open AuthModeShare=Shared AuthModeAuto=Auto Switch AuthModeWPA=WPA AuthModeWPAPSK=WPA-PSK AuthModeWPANone=WPA-NONE AuthModeWPA2=WPA2 AuthModeWPA2PSK=WPA2-PSK EncryStatus_TKIP=TKIP EncryStatus_AES=AES WEP_64=64 Bits WEP_128=128 Bits WEP_152=152 Bits WEP_256=256 Bits ChWidth2=20 ChWidth2_4=20-40Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.