1. DR_8036TX_DRv104_All.zip Driver
2. WFW.TXT File Contents

WFW.TXT Driver File Contents (DR_8036TX_DRv104_All.zip)

*******************************************************************************
*                             SMC Networks, Inc.                              *
*                        EZ CardBus-II 10/100 PC Card                         *
*                                                                             *
*          NDIS/2 DRIVER FOR WINDOWS FOR WORKGROUPS 3.11 INSTALLATION         *
*                                                                             *
*                    Copyright (C) 2001 SMC Networks, Inc.                    *
*                            All Rights Reserved.                             *
*******************************************************************************

The driver named SMCEZ2 contained in the directory \NDIS2 conforms to the
Network Driver Interface Specification (NDIS) defined by Microsoft/3Com.

SMCOPEN.EXE is the EZ CardBus-II 10/100 PC card enabling program for the MS-DOS
system. Before you can use any of the DOS mode drivers, such as the Novell DOS
ODI driver, the NDIS2 driver, the packet driver, or the diagnostic program, you
have to run SMCOPEN.EXE to enable the EZ CardBus-II 10/100 PC card first.

NDIS Driver Installation on Windows for Workgroups
==================================================

1. Start Windows

2. Click the "Control Panel" icon in the Main Program Group.

3. Click the "Network" icon in the Control Panel window.

4. Select the "Adapters" item in the Option dialog box.

5. Click the <Add> button to select it.

6. Select "Unlisted or Updated Network Adapter" when the Install driver field
   appears.

7. Type the destination drive and path name in your PC.  Make sure the full
   path of the directory (i.e. A:\NDIS2\DOS) is given.

8. Insert the SMC Driver Diskette in your floppy drive and press <Enter>
   to start the installation process.

9. Follow screen instructions to complete the process.

10. Insert the SMC driver disk in drive A:. Copy A:\SMCOPEN\SMCOPEN.EXE to
    a directory on the hard disk (e.g. C:\SMCOPEN\SMCOPEN.EXE).
    Modify the CONFIG.SYS file by following the sample CONFIG.SYS file below.

11. Restart your computer.


Sample Configuration Files
--------------------------

1. CONFIG.SYS File

   FILES=30
   buffers=30
   STACKS=9,256
   DEVICE=c:\windows\HIMEM.sys
   DEVICE=C:\WINDOWS\IFSHLP.SYS
   DEVICE=C:\SMCOPEN\SMCOPEN.exe
   LASTDRIVE=y

2. PROTOCOL.INI File on Windows for Workgroups

   [network.setup]
      version=0x3100
      netcard=SMCEZ2,1,SMCEZ2
      transport=ms$netbeui,MS$NETBEUI
      lana0=SMCEZ2,1,ms$netbeui

   [protman]
      DriverName=PROTMAN$
      PRIORITY=MS$NETBEUI

   [SMCEZ2]
      DriverName=SMCEZ2$

   [MS$NETBEUI]
      DriverName=netbeui$
      SESSIONS=10
      NCBS=32
      BINDINGS=SMCEZ2
      LANABASE=0

3. AUTOEXEC.BAT File

   C:\WINDOWS\net start
   C:\WINDOWS\SMARTDRV.EXE
   @ECHO OFF
   PROMPT $p$g
   PATH C:\WINDOWS;
   SET TEMP=C:\WINDOWS\TEMP

TRADEMARKS
==========
All Tademarks or Brand names mentioned are properties of their respective
companies.
== End of File ==