*******************************************************************************
* SMC Networks, Inc. *
* EZ CardBus-II 10/100 PC Card *
* *
* NDIS/2 DRIVER FOR LAN SERVER INSTALLATION *
* *
* Copyright (C) 2001 SMC Networks, Inc. *
* All Rights Reserved. *
*******************************************************************************
The driver named SMCEZ2 contained in the directory NDIS2 conforms to the
Network Driver Interface Specification (NDIS) defined by Microsoft/3Com.
Contents of the file:
A. DOS LAN Requester Installation for LSP V1.30 to V1.37
B. LAN Server 4.0 DOS Client Installation
SMCOPEN.EXE is the EZ CardBus-II 10/100 PC Card enabling program for the MS-DOS
system. Before you can use any of the DOS mode drivers, such as the Novell DOS
ODI driver, the NDIS2 driver, the packet driver, or the diagnostic program, you
have to run SMCOPEN.EXE to enable the EZ CardBus-II 10/100 PC Card first.
A. DOS LAN Requester Installation for LSP V1.30 to V1.37
=========================================================
1. Insert the IBM LAN Support Program (LSP) Version 1.30 (or 1.31 to 1.37)
Diskette into your floppy drive (drive A: or B:).
2. Type the following at the DOS prompt and press <Enter>:
A:>dxmaid
3. The screen will display the IBM logo. Press <Enter> twice until the
"Environment Information" appears on screen.
4. Respond to the screen prompts, specifying the following values for each
field:
Use the <Space Bar> to toggle between choices:
Configuration for this computer? Yes
Use existing configuration information? Yes
Do you have adapter option diskettes? Yes
Are you configuring for two adapters? No
Do you need 802.2 interface support? No
Enter the appropriate drive and directory information:
Source for LSP A:\
Target for new configuration C:\lsp
5. Make sure that the values given above are correct. Press <Enter> to store
your choices.
6. Insert the Driver Diskette in your source drive. Specify the path and press
<Enter> to proceed. Examples:
A:\NDIS2\DOS,
B:\NDIS2\DOS
7. Upon pressing <Enter> the necessary drives from the Driver Diskette are
copied onto you target directory on your hard disk.
8. Follow the screen instructions to complete this process. Simply press <Enter>
for each screen display to select the default options. Press <Enter> three
times, until you reach the display prompting you to insert the LSP diskette.
9. Insert the LSP diskette as prompted. Press <Enter> to acknowledge completion
of the action.
10. A screen showing the current configuration detected will be displayed.
It should show the SMC EZ CardBus-II 10/100 PC Card and
the protocols already selected (i.e., "IBM IEEE 802.2" and
"IBM OS/2 NETBIOS").
11. Press <F4> to save the new configuration. This completes the LSP
installation.
************************************************************
* NOTE: *
* *
* You should have defined in your CONFIG.SYS a *
* minimum of 20 files, i.e. FILES=20, to run the *
* software properly. Change the FILES line using *
* the text editor if needed. *
* *
* If installing LSP for the first time, you should *
* complete the installation by typing install and *
* following the instructions displayed on the screen. *
************************************************************
12. Use a text editor to edit the CONFIG.SYS file. Specify at least 20 files
in the FILES= line. Modify it to the following:
FILES=20
13. Save the configuration and reset your computer.
14. Insert the DOS LAN Requester Install Diskette into your floppy drive.
15. Type the following and press <Enter>:
INSTALL <Enter>
16. The IBM logo will again appear on the screen. Press <Enter> to move on
to the next screen.
17. Follow screen instructions, pressing <Enter> to move from screen to screen
until you are prompted to indicate the pathname of the DOS LAN Requester
directory.
TIP: After the IBM logo appears on the screen,
press <Enter> twice to reach this screen.
18. Specify the pathname for the DOS LAN Requester directory (C:\DOSLAN is the
default). Then press <Enter> to continue.
19. The program will ask you for the services that you require.
20. Highlight the appropriate option. Select either "Send messages" or
the "Send, View, Edit, and Log message" option.
TIP: Normally, the second option "Send, View, Edit
and Log message" is selected.
21. Specify the PC's ID and domain ID. The domain ID is the domain server ID;
it should be the same for all workstations of the network.
22. Follow the screen prompts to complete installation.
23. Insert the SMC EZ CardBus-II 10/100 PC Card driver disk in drive A:.
Copy SMCOPEN.EXE from the driver disk in \SMCOPEN to a directory on the
hard disk(e.g. C:\SMCOPEN\SMCOPEN.EXE). Enter the following line in
CONFIG.SYS. SMCOPEN.EXE has to be executed before the NDIS2 driver loads.
DEVICE=C:\SMCOPEN\SMCOPEN.EXE
24. Remove the diskette from drive A: and press <Enter> to restart the machine.
B. LAN Server 4.0 DOS Client Installation
==========================================
1. Under the DOS environment, change to the LAN Server DOS Client
subdirectory, that is, enter the following command
CD \NET
Note: \NET is the default directory name of LAN Server 4.0 DOS Client.
Note: Before installing the LAN driver, you should install the IBM LAN
Server DOS Client first.
2. Type INSTALL and press <Enter> to enter the DOS LAN installation program.
3. When the "Install for DOS LAN Services" screen appears, highlight the
"the listed options are correct" choice and press <Enter>.
4. On the second screen, you will see the following information:
Machine ID, User name, Domain name,... and Network card information.
Highlight the "Network card : No network card was selected" choice and
press <Enter>.
5. Select the first choice from the following two selections
"Add driver for network card",
"Driver configuration is correct".
6. Select "Network card not shown in list below ..." from a listing of
network adapters on the next screen.
7. Insert the SMC EZ CardBus-II 10/100 PC Card driver diskette into drive A: and
specify the path of the driver installation file (OEMSETUP.INF) by typing
A:\NDIS2\DOS and press <Enter>.
8. Highlight "SMC EZ CardBus-II 10/100 PC Card" and press
<Enter>.
9. If necessary, choose "Edit settings for network card driver", otherwise
choose "Driver configuration is correct".
Note: Please see NDIS.TXT for the parameter settings.
10. Highlight "The listed options are correct" and press <Enter> on the next
screen.
11. Then, the Installation Program will ask you to insert DOS LAN Services
Disk 1. Be careful, do not follow the screen instruction here;
that is, you should not insert the DOS LAN Services Disk.
All you have to do is press <Enter> and wait for installation complete.
12. Insert the SMC EZ CardBus-II 10/100 PC Card driver disk in drive A:.
Copy SMCOPEN.EXE from the driver disk in \SMCOPEN to a directory on the
hard disk(e.g. C:\SMCOPEN\SMCOPEN.EXE). Enter the following line in
CONFIG.SYS. SMCOPEN.EXE has to be executed before the NDIS2 driver loads.
DEVICE=C:\SMCOPEN\SMCOPEN.EXE
13. Remove the diskette from drive A: and press <Enter> to restart the machine.
TRADEMARKS
==========
All Tademarks or Brand names mentioned are properties of their respective
companies.
== End of File ==
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.