*******************************************************************************
* SMC Networks, Inc. *
* EZ CardBus-II 10/100 PC Card *
* *
* NetWare ODI Client Driver For DOS Workstation *
* *
* Copyright (C) 2001 SMC Networks, Inc. *
* All Rights Reserved. *
*******************************************************************************
This file is an explanation of the files contained in the \DOSODI subdirectory
of this diskette and their usage. For more information please refer to "NOVELL
NetWare ODI Shell for DOS" manual.
Installation Procedure
======================
Before you start with the installation process, make sure that the adapter is
properly installed and configured. Make sure that your NetWare operating system
is properly installed.
If there are Netware client programs such as: LSL.COM, IPXODI, and VLM.EXE in
your system already, you can use the following procedures to setup your system.
SMCOPEN.EXE is the EZ CardBus-II 10/100 PC Card enabling program for the MS-DOS
system. Before you can use any of the DOS mode drivers, such as the Novell DOS
ODI driver, the NDIS2 driver, the packet driver, or the diagnostic program, you
have to run SMCOPEN.EXE to enable the EZ CardBus-II 10/100 PC Card first.
1. Copy the A:\DOSODI\SMCEZ.COM and A:\SMCOPEN\SMCOPEN.EXE to the Netware
client directory which contains NET.CFG, LSL.COM, IPXODI.COM, and VLM.EXE
with related *.VLM files.
2. Update the NET.CFG file. You can refer to the NET.CFG sample.
3. Make sure to add LASTDRIVE=Z in your CONFIG.SYS file.
4. Enter the following commands to connect to your Novell server:
SMCOPEN
LSL
SMCEZ
IPXODI
VLM
F:
LOGIN <user_name>
** NOTE **
Multiple LAN Adapters in a system:
If you want to install mutiple LAN adapter in your system, you have
to use "SLOT" keyword in NET.CFG to select which adapter to use with
your netware client.
Configuration Files
===================
File Name: NET.CFG
Sample of configuration file:
-----------------------------------------------------------------------------
Link Driver SMCEZ
FRAME Ethernet_802.2
FRAME Ethernet_802.3
FRAME Ethernet_SNAP
FRAME Ethernet_II
; No_Early_Rx_Interrupt_Enable ; Certification, please remove the
; first ";" of this line
; FORCE_MEDIA
; Connection_Type = AUTO ; 10M 10MFD 100M 100MFD, default is AUTO
TX_THRESHOLD = 4 ; 0..3, 4=Store and forward, default=4
NetWare DOS Requester
FIRST NETWORK DRIVE = F
NETWARE PROTOCOL = NDS BIND
MAX IPG = 0
; PBURST READ WINDOW SIZE=45
; PBURST WRITE WINDOW SIZE=45
-----------------------------------------------------------------------------
** Note **
Its PCI cycle maybe slower on some mechine. At this time, you should enable
store and forward function in NET.CFG.
TRADEMARKS
==========
All Tademarks or Brand names mentioned are properties of their respective
companies.
== End of File ==
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.