;****************************************************************
; SMC2209USB/ETH 10/100 USB 2.0 Adapter
;
; Version: 3.10.3.5 for windows vista 64-bit
;****************************************************************
[Version]
Signature = "$Windows NT$"
CatalogFile = SMC2209.cat
Class = Net
ClassGUID = {4d36e972-e325-11ce-bfc1-08002be10318}
Provider = %USB2%
DriverVer = 01/20/2007, 3.10.3.5
[Manufacturer]
%USB2% = USB, NTamd64
[ControlFlags]
ExcludeFromSelect = USB\VID_0B95&PID_1720
[USB.NTamd64]
%SMC2209.DeviceDesc% = SMC2209.Ndi,USB\VID_0B95&PID_1720
;****************************************************************
[SMC2209.Ndi]
AddReg = SMC2209.NT.Reg, SMC2209.Con.Reg
Characteristics = 0x84
BusType = 15
CopyFiles = CopyFile.Sys
*IfType = 6 ; IF_TYPE_ETHERNET_CSMACD
*MediaType = 0 ; NdisMedium802_3
*PhysicalMediaType = 14 ; NdisPhysicalMedium802_3
[SMC2209.Ndi.Services]
AddService = SMC2209, 2, SMC2209.Service, Common.EventLog
;****************************************************************
; Driver parameters
;****************************************************************
[SMC2209.Con.Reg]
; Connection Type
HKR,Ndi\params\*SpeedDuplex,ParamDesc,,"Connection Type"
HKR,Ndi\params\*SpeedDuplex,default,,"0"
HKR,Ndi\params\*SpeedDuplex,type,,"enum"
HKR,Ndi\params\*SpeedDuplex\enum,0,,"AutoSense"
HKR,Ndi\params\*SpeedDuplex\enum,1,,"10BaseT Half_Duplex"
HKR,Ndi\params\*SpeedDuplex\enum,2,,"10BaseT Full_Duplex"
HKR,Ndi\params\*SpeedDuplex\enum,3,,"100BaseTx Half_Duplex"
HKR,Ndi\params\*SpeedDuplex\enum,4,,"100BaseTx Full_Duplex"
; Mac Address
HKR,Ndi\params\NetworkAddress,ParamDesc,0,"NetworkAddress"
HKR,Ndi\params\NetworkAddress,type,0,"edit"
HKR,Ndi\params\NetworkAddress,default,0, "000000000000"
HKR,Ndi\params\NetworkAddress,LimitText,0,"12"
HKR,Ndi\params\NetworkAddress,UpperCase,0,"1"
HKR,Ndi\params\NetworkAddress,Optional,0,"1"
; Flow Control
HKR,Ndi\params\*FlowControl,ParamDesc,,"Flow Control"
HKR,Ndi\params\*FlowControl,default,,"3"
HKR,Ndi\params\*FlowControl,type,,"enum"
HKR,Ndi\params\*FlowControl\enum,0,,"Disable"
HKR,Ndi\params\*FlowControl\enum,1,,"Tx Enable"
HKR,Ndi\params\*FlowControl\enum,2,,"Rx Enable"
HKR,Ndi\params\*FlowControl\enum,3,,"Rx & Tx Enable"
; Wake Up
HKR,Ndi\params\WakeUp,ParamDesc,,"Wake Up"
HKR,Ndi\params\WakeUp,default,,"0"
HKR,Ndi\params\WakeUp,type,,"enum"
HKR,Ndi\params\WakeUp\enum,0,,"Disable"
HKR,Ndi\params\WakeUp\enum,2,,"Link Up"
HKR,Ndi\params\WakeUp\enum,4,,"Magic Packet"
HKR,Ndi\params\WakeUp\enum,6,,"Both"
; Qos Packet Tagging
HKR,Ndi\params\QosTag,ParamDesc,,"QoS Packet Tagging"
HKR,Ndi\params\QosTag,default,,"0"
HKR,Ndi\params\QosTag,type,,"enum"
HKR,Ndi\params\QosTag\enum,0,,"Disable"
HKR,Ndi\params\QosTag\enum,1,,"Enable"
;****************************************************************
; Install section for Windows NT 5
;****************************************************************
[SMC2209.NT.Reg]
; Interfaces
HKR, Ndi\Interfaces, LowerRange, 0, "ethernet"
HKR, Ndi\Interfaces, UpperRange, 0, "ndis5"
HKR, Ndi, Service, 0, "SMC2209"
HKR,,LogErrorMessages, 0, "1"
[SMC2209.Service]
DisplayName = %SMC2209.DeviceDesc%
ServiceType = 1
StartType = 3
ErrorControl = 1
ServiceBinary = %12%\SMC2209.sys
LoadOrderGroup = NDIS
[Common.EventLog]
AddReg = Common.AddEventLog.Reg
[Common.AddEventLog.Reg]
HKR, , EventMessageFile, 0x00020000,"%%SystemRoot%%\System32\netevent.dll;%%SystemRoot%%\system32\drivers\SMC2209.sys"
HKR, , TypesSupported , 0x00010001, 7
[CopyFile.Sys]
SMC2209.sys,,,2
;**********************************************************************
; Destination directories
;**********************************************************************
[DestinationDirs]
CopyFile.Sys = 12
[SourceDisksNames]
1=%SMC2209.DiskName%,,
[SourceDisksFiles]
SMC2209.sys=1,,SMC2209.sys,10000
;**********************************************************************
; Localizable strings
;**********************************************************************
[Strings]
USB2 = "SMC Networks"
SMC2209.DiskName = "SMC2209USB/ETH 10/100 USB 2.0 Adapter"
SMC2209.DeviceDesc = "SMC2209USB/ETH 10/100 USB 2.0 Adapter"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.