1. FW_SMC7904BRA_v053.zip Driver
2. RN_SMC7904BRA_v053.txt File Contents

RN_SMC7904BRA_v053.txt Driver File Contents (FW_SMC7904BRA_v053.zip)

*************************************************************************
*			    SMC Networks, INC
*		    	Barricade Broadband Router
*			      SMC7904BRA
*			  FIRMWARE version V0.53
*			        19/09/2006
*************************************************************************
This document contains two sections:

A) The upgrade procedure
B) The firmware release history for SMC7904BRA

=========================================================================
Section A: Upgrade Procedure
=========================================================================

1.  Turn on the Barricade and plug it into your network adapter using port 1.

2.  Connect to the Web user interface by typing the Barricade's IP Address (ex: 192.168.2.1) in your browser. You will then be prompted to enter your password (default: smcadmin) to logon to the Barricade.

3.  Click on the "Tools" link, then click the "Update Firmware" option. The "Update Firmware" screen will appear.

4.  Click the "Browse" button and point it to the location of the firmware file (FW_7904BRA_v053.bin). 

5.  Next click "Apply" button and follow the prompts to begin the upgrade. You will see the message "Processing, please wait" and a percentage bar count up to 100%. When the upgrade is complete the Barricade will reboot.

6.  Your Barricade has now been successfully upgraded. 

Note: It is recommended to make a note of your configuration settings before performing the upgrade.

=========================================================================
Section B: Firmware History
=========================================================================
v0.53
- Modify the firewall extended rule's default value to make TCP/443(SSL)
port stealth.
- Fix a firmware upgrade bug in telnet.
- Fix a bug in controling SNMP function.
- Add VLAN information in help page.

v0.52
- Add "Westex Telephone" in setup wizard's ISP selection.
- Disable OAM_CC_Enable flag in ADSL driver. For Datapump 6.x, this flag
should be disable.

v0.51
- Fix a bug in NTP daylight saving, it is always on even if been turned off.
- Add a control of SNMP agent function: disable, LAN only, WAN only, LAN&WAN.
  The new default setting is disabled in this version, and it would be LAN only
  when upgraded to this version(0.50 or older be upgraded to 0.51)

v0.50
- ADSL  Modem Code..06.00.04..00A 
- Making the web management to only accept the root's password 
- Fix VLAN bug - after adding VLAN, needs to reboot 7904BRA 

v0.45
- Updated modem code to v5.2.2.0 for solving ADSL interoperability issue with certain model DSLAM's

v0.43
- ADSL Datapump code is 4.2.1.0 with “Copper-Mountain” flag set for solving training issue on G.dmt   lines
- Fix “the bug in setup wizard’s ISP selection, the ISP number in Philippines is wrong”
- Add New Zealand’s ISP information into setup wizard.
- Fix “DNS IP lost in PPPoE when the link is up and down randomly”
- Add “Remote login block out” function in web server. The user may try at most five times during a   period of time, otherwise, the login page will be blocked.



v0.42
- Updated modem code to v4.1.2.0 for solving ADSL interoperability issue with certain model DSLAM's
- Fix “device would reboot when moving telnet’s menu to show default.”
- Add ISP information of Faroe Island in the setup wizard, also update other countries ISP       information
- Fix “DNS server IP can’t be saved in setup wizard when selecting ‘IpoA’”

v0.41
- Fix the problem in SNMP, “MIB’s values can be saved”. A new data structure be added in   configuration for storing system group and other groups’ writable objects if necessary.
- Fix a bug in WAN port setting,”when PVC’s protocol is changed from bridged mode to others, the   interface should not belong to the default VLAN group.”
- Add ISP information for Australia into Setup wizard page


v0.40
- Automatically detect DSP frequency to fix ADSL2/2+ problem
- Fix bug UPnP displays incorrect Tx & Rx speed
- Updated help file
- Fix bug causing MSN to fail with Voice calls


V0.39	First official release		ADSL code 3.2.6.0
- Default timeout on PPP interfaces changed to 5 minutes
- Custom remote management port now works with firewall enabled
- The NAT mapping table now refreshes correctly
- Added the daylight savings controls to the System->Time Settings menu