;---------------------------------------------------------------------------- ; SMC2335W Universal Wireless Cardbus Adapter ; ; INF file for installing SMC2335W Universal Wireless Cardbus Adapter ; on Windows NT 4.0 ; ;---------------------------------------------------------------------------- [Identification] OptionType = NetAdapter [PlatformsSupported] ISA EISA MCA PCI [Options] ATH [OptionsTextENG] ATH = "SMC2335W Universal Wireless Cardbus Adapter" [AllFileConstants] GenericInfVersion = "2.1.1.7" UtilityInf = "UTILITY.INF" ParamInf = "NCPARAM.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" Exit_Code = 0 NetEventDLL = "%SystemRoot%\System32\netevent.dll" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" Manufacturer = "SMC Networks, Inc." CardName = "AR5BCB-01-01" DISABLEPCMCIASYS = "0" ; "1" PCIVendorID = 5772 ; 0x168c ; Devices: 0x0011, 0x0012 PCIDeviceIDList = { 17, 18 } [FileConstants-ATH] GenericAdapterName = "SMC2335W Universal Wireless Cardbus Adapter" GenericTitleName = "SMC2335W Universal Wireless Cardbus Adapter" GenericDriverName = "SMC2335W Universal Wireless Cardbus Adapter Driver" GenericSysName = "SMC11AB.SYS" GenericName = "SMC11AB" ProductMajorVersion = "2" ProductMinorVersion = "10" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ProductSoftwareName = "SMC11AB" ProductSoftwareDesc = "SMC2335W Universal Wireless Cardbus Adapter" ProductSoftwarePath = "\SystemRoot\System32\drivers\"$(GenericSysName) NetRuleSoftwareType = "SMC11ABSys ndisDriver SMC11ABDriver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """SMC11ABSys"" yes no container" NetRuleSoftwareClass = {"SMC11ABDriver basic"} NetRuleSoftwareBindable = {"SMC11ABDriver SMC11ABAdapter non exclusive 100"} ProductHardwareName = "SMC11AB" ProductHardwareDesc = "SMC2335W Universal Wireless Cardbus Adapter" NetRuleHardwareType = "SMC11AB SMC11ABAdapter" NetRuleHardwareBindForm = " yes yes container" NetRuleHardwareClass = {"SMC11ABAdapter basic"} ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" VERS1Manufacturer = "SMC" VERS1Product = "SMC2335W Universal Wireless Cardbus Adapter" VERS1Type = "SMC2335W" PCMCIA = 0 [GeneralConstants] From = "" To = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MaximumAllowed = 33554432 RegistryError = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExist = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers DefaultConfigName = "Default" Nictype = 2 [date] ; Now is a list which contains { Sec From 1-1-1970, Year, Month, Day, Hour, ; Minute, Second } Now = {} ? $(!LIBHANDLE) GetSystemDate ;--------------------------------------------------------------------------- ; 1. Identify ; ; DESCRIPTION: To verify that this INF deals with the same type of options ; as we are choosing currently. ; ; INPUT: None ; ; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL ; $($R1): Option Type (COMPUTER ...) ; $($R2): Diskette description ;--------------------------------------------------------------------------- [Identify] read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) ;------------------------------------------------------------------------ ; 2. ReturnOptions: ; ; DESCRIPTION: To return the option list supported by this INF and the ; localised text list representing the options. ; ; ; INPUT: $($0): Language used. ( ENG | FRN | ... ) ; ; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL | ; STATUS_NOLANGUAGE ; STATUS_FAILED ; STATUS_NOTSUPPORTED ; $($R1): Option List ; $($R2): Option Text List ;------------------------------------------------------------------------ [ReturnOptions] set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ifstr(i) $($1) == $(KeyNull) goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) ;------------------------------------------------------------------------ ; InstallOption: ; ; This section is shelled to by main installation processing ; or by NCPASHEL.INF during reconfig, removal, update, etc. ; ; FUNCTION: To copy files representing Options ; To configure the installed option ; To update the registry for the installed option ; ; INPUT: $($0): Language to use ; $($1): OptionID to install ; $($2): SourceDirectory ; $($3): AddCopy (YES | NO) ; $($4): DoCopy (YES | NO) ; $($5): DoConfig (YES | NO) ; ; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL | ; STATUS_NOLANGUAGE | ; STATUS_USERCANCEL | ; STATUS_FAILED ;------------------------------------------------------------------------ [InstallOption] set Status = STATUS_FAILED set Option = $($1) ;----read from install ifstr(i) $(!NTN_Infoption) != "" set Option = $(!NTN_Infoption) endif ;---- set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) Set !DebugOutputControl = 1 Debug-Output "INF: InstallOption" set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif set-subst LF = "\n" read-syms GeneralConstants read-syms AllFileConstants read-syms FileConstants"-"$(Option) read-syms DialogConstants$(!STF_LANGUAGE)"-"$(Option) ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = $(OK) endif read-syms AllFileConstants$(!STF_LANGUAGE) read-syms FileConstants$(!STF_LANGUAGE)"-"$(Option) detect date set-title $(FunctionTitle) set To = Begin set From = Begin set CommonStatus = STATUS_SUCCESSFUL EndWait Begin = + Set ActivateDetection = FALSE Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure set StartLabel = configureadapter Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) set From = end set To = end goto nonfatalinfo endif else set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE endif ; Set the Default values set bssTypeValue = "1" ; bssType = AP (Infratructure) set defaultKeyValue = "0" ; defaultKey = Shared Key 1 (key0) set uniqKeyLengthValue = "0" ; uniqKeyLength = 40 bits set keyLength0Value = "0" ; keyLength0 = 40 bits set keyLength1Value = "0" ; keyLength1 = 40 bits set keyLength2Value = "0" ; keyLength2 = 40 bits set keyLength3Value = "0" ; keyLength3 = 40 bits set MapRegistersValue = "256" set QoSValue = "0" ; QoS = Disabled set tpcValue = "0" ; tpc = Highest Power set sleepModeValue = "2" ; sleepMode = Normal Power Save set AdHocBandValue = "0" ; 11b mode set AwakeTimePerfValue = "200" ; 200 msec set beaconIntervalValue = "100" ; 100 msec set ccodeValue = "US" ; US reg domain set clistValue = "" set EncryptionAlgValue = "2" ; Auto set FragThresholdValue = "2346" ; No Fragmentation set HwTxRetriesValue = "4" ; # of xmit retries done by hardware set NetBandValue = "3" ; A + A turbo default set NetworkAddressValue = "" set privacyInvokedValue = "0" ; Disabled set uniqKeyValue = "" set key0Value = "" set key1Value = "" set key2Value = "" set Key3Value = "" set rateCtrlEnableValue = "1" ; enable rate control set RTSThresholdValue = "2346" ; request-to-send disabled set scanTypeValue = "2" ; use reg domain for scan type set SmeEnableValue = "1" ; enable SME operation set SsidValue = "" set SwTxRetryScaleValue = "6" ; 6 xmit s/w reties set BusNum = 0 set SlotNum = 0 set FunctionNum = 0 set cNetBandValue = 3 ; NCP netband value Set From = $(fatal) Set To = $(fatal) Goto $(StartLabel) ;----------------------------------------------- ; Installation Section ;----------------------------------------------- installadapter = + ; PCI Support. ; If a device is not found, don't error out => assume it's Cardbus. Debug-Output "INF: Starting Install" Debug-Output "INF: Vendor ID = $(PCIVendorID)" Debug-Output "INF: Device ID List= $(PCIDeviceIDList)" set AdapterList = {} ForListDo $(PCIDeviceIDList) set PCIDeviceID = $($) Shell $(UtilityInf), GetPCIInformation, $(PCIVendorID) $(PCIDeviceID) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ; append all adapters onto the adapter list ForListDo $($R0) set AdapterList = >( $(AdapterList), {*($($),1), *($($),2), *($($),3)} ) EndForListDo EndForListDo Debug-Output "INF: Adapter List= $(AdapterList)" ifstr(i) $(AdapterList) != {} ; Only support one PCI adapter set BusNum = *(*($(AdapterList),1),1) set SlotNum = *(*($(AdapterList),1),2) set FunctionNum = *(*($(AdapterList),1),3) endif ; Check whether the same version of the software exists ; OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MaximumAllowed) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) ; Same version already existed in the local machine ; Popup the dialog and ask the user whether he wants to continue CloseRegKey $(KeyProduct) ifstr(i) !(NTN_RegBase) == $(ProductKeyName) Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif goto end else ; Add a new adapter card? Shell $(UtilityInf), CardExistedDlg ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif ifstr(i) $($R1) != "OK" goto end endif set OldVersionExist = $(TRUE) endif endif ; prompt for media ; IfStr(i) $(SrcDir) == "" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) endif Debug-Output "INF: install control panel" install "Install-Cpl" goto adaptersetup ;----------------------------------------------- ; Configuration Section ;----------------------------------------------- ; Confugure the adapter by invoking the NCP ; configureadapter = + Debug-Output "INF: configure adapter" shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" "Configure is not supported, use control panel to do configuration" goto successful adaptersetup = + Set From = adapteroptions adapteroptions = + set ENABLER = 0 ; If installing, go create the necessary keys; ; if configuring, they're already open ; skipoptions =+ Debug-Output "INF: skipoptions" ifint $(OldVersionExist) == $(TRUE) ifstr(i) $(!NTN_InstallMode) == configure goto writeparameters endif endif StartWait ; Add Software Component ifint $(OldVersionExist) == $(FALSE) ifstr(i) $(!NTN_InstallMode) == "install" Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif Debug-Output "INF: install driver" install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif endif Debug-Output "INF: add software component" Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwarePath), "kernel", "NDIS", {}, "",+ $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif ; $R1 contains the product version key handle ; $R2 contains the NetRules subkey handle ; $R3 contains the new Services key handle ; $R4 contains the Parameters key ; $R5 contains the Linkage Key set RegistryError = $($R0) set KeyProduct = $($R1) Set SoftNetRulesKey = $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) Ifstr(i) $(RegistryError) != NO_ERROR EndWait Debug-Output "Registry error: add software components" CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDesc)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Debug-Output "INF set product keys" Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryError = $($R0) Ifstr(i) $(RegistryError) != NO_ERROR EndWait Debug-Output "Registry error: add value list." CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Debug-Output "INF set software keys" Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryError = $($R0) CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) Ifstr(i) $(RegistryError) != NO_ERROR EndWait Debug-Output "Registry error: add value list." goto fatalregistry endif endif ; Create the HARDWARE\Netcard region and its corresponding service ; Debug-Output "INF set hardware keys" Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "Cannot add hardware component" goto ShellCodeError endif set RegistryError = $($R0) Ifstr(i) $(RegistryError) != NO_ERROR EndWait Debug-Output "Registry error: add hardware component" CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif ; $R1 Registry key variable for HARDWARE\Netcard\(n) ; $R2 Registry key variable for HARDWARE\Netcard\(n)\\NetRules ; $R3 Registry key handle for <service>\Parameters key ; $R4 Adapter number assigned to adapter ; $R5 Service name generated by combining svc name with adapter number set KeyParameters = $($R3) set KeyAdapterRules = $($R2) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDesc)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Debug-Output "INF set mfg keys" Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif CloseRegKey $($R1) set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Debug-Output "INF set rule keys" Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryError = $($R0) Ifstr(i) $(RegistryError) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." CloseRegKey $(KeyParameters) CloseRegKey $(KeyAdapterRules) goto fatalregistry endif CloseRegKey $(KeyAdapterRules) goto writeparameters ; REQUIRED: $(KeyParameters) contains service Parameters key handle ; writeparameters = + Shell $(UtilityInf), GetBusTypeNum set BusTypeNum = $($R1) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif ; Add the rest of the parameters to the Services area Debug-Output "INF Create Driver Parameters" set NewValueList = {{bssType, $(NoTitle),$(!REG_VT_SZ),$(bssTypeValue)},+ {sleepMode, $(NoTitle),$(!REG_VT_SZ),$(sleepModeValue)},+ {defaultKey, $(NoTitle),$(!REG_VT_SZ),$(defaultKeyValue)},+ {uniqKeyLength, $(NoTitle),$(!REG_VT_SZ),$(uniqKeyLengthValue)},+ {keyLength0, $(NoTitle),$(!REG_VT_SZ),$(keyLength0Value)},+ {keyLength1, $(NoTitle),$(!REG_VT_SZ),$(keyLength1Value)},+ {keyLength2, $(NoTitle),$(!REG_VT_SZ),$(keyLength2Value)},+ {keyLength3, $(NoTitle),$(!REG_VT_SZ),$(keyLength3Value)},+ {MapRegisters, $(NoTitle),$(!REG_VT_SZ),$(MapRegistersValue)},+ {QoS, $(NoTitle),$(!REG_VT_SZ),$(QoSValue)},+ {tpc, $(NoTitle),$(!REG_VT_SZ),$(tpcValue)},+ {AdHocBand, $(NoTitle),$(!REG_VT_SZ),$(AdHocBandValue)},+ {AwakeTimePerf, $(NoTitle),$(!REG_VT_SZ),$(AwakeTimePerfValue)},+ {beaconInterval, $(NoTitle),$(!REG_VT_SZ),$(beaconIntervalValue)},+ {ccode, $(NoTitle),$(!REG_VT_SZ),$(ccodeValue)},+ {clist, $(NoTitle),$(!REG_VT_SZ),$(clistValue)},+ {EncryptionAlg, $(NoTitle),$(!REG_VT_SZ),$(EncryptionAlgValue)},+ {FragThreshold, $(NoTitle),$(!REG_VT_SZ),$(FragThresholdValue)},+ {Ssid, $(NoTitle),$(!REG_VT_SZ),$(SsidValue)},+ {NetworkAddress, $(NoTitle),$(!REG_VT_SZ),$(NetworkAddressValue)},+ {uniqKey, $(NoTitle),$(!REG_VT_SZ),$(uniqKeyValue)},+ {key0, $(NoTitle),$(!REG_VT_SZ),$(key0Value)},+ {key1, $(NoTitle),$(!REG_VT_SZ),$(key1Value)},+ {key2, $(NoTitle),$(!REG_VT_SZ),$(key2Value)},+ {key3, $(NoTitle),$(!REG_VT_SZ),$(key3Value)},+ {privacyInvoked, $(NoTitle),$(!REG_VT_SZ),$(privacyInvokedValue)},+ {rateCtrlEnable, $(NoTitle),$(!REG_VT_SZ),$(rateCtrlEnableValue)},+ {RTSThreshold, $(NoTitle),$(!REG_VT_SZ),$(RTSThresholdValue)},+ {scanType, $(NoTitle),$(!REG_VT_SZ),$(scanTypeValue)},+ {SmeEnable, $(NoTitle),$(!REG_VT_SZ),$(SmeEnableValue)},+ {HwTxRetries, $(NoTitle),$(!REG_VT_SZ),$(HwTxRetriesValue)},+ {SwTxRetryScale, $(NoTitle),$(!REG_VT_SZ),$(SwTxRetryScaleValue)},+ {BusType, $(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+ {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)},+ {FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)},+ {DriverDesc,$(NoTitle),$(!REG_VT_SZ),$(GenericAdapterName)},+ {AdapterType, $(NoTitle),$(!REG_VT_DWORD),0},+ {PCMCIA, $(NoTitle),$(!REG_VT_DWORD),0},+ {DriverType,$(NoTitle),$(!REG_VT_DWORD),1},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+ {NwayProtocol,$(NoTitle),$(!REG_VT_DWORD),1},+ {PlatformType,$(NoTitle),$(!REG_VT_DWORD),1}} Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif ; go get the subsystem ID so the correct NIC type can be set ; ; 1.) Call Executable to populate the reg keys with the PCI data for the current instance of the NIC RunProgram ExitCode "" "" ANTPCIEX.EXE ; 2.) Check open key for the data of interest. *** DeviceID, SubSystemID, SubVendorID, and VendorID are present GetRegValue $(KeyParameters) "ANTDeviceID" Array_DeviceID GetRegValue $(KeyParameters) "ANTVendorID" Array_VendorID GetRegValue $(KeyParameters) "ANTSubSystemID" Array_SubSystemID GetRegValue $(KeyParameters) "ANTSubVendorID" Array_SubVendorID Set Value_DeviceID = *($(Array_DeviceID),4) Set Value_VendorID = *($(Array_VendorID),4) Set Value_SubSystemID = *($(Array_SubSystemID),4) Set Value_SubVendorID = *($(Array_SubVendorID),4) ifint $(Value_DeviceID) == 17 ; 0x11 - MAUI2 Set Nictype = 0 set NetBandValue = "3" ; 11a mode set cNetBandValue = 3 endif ifint $(Value_DeviceID) == 18 ; 0x12 - Oahu ifint $(Value_SubSystemID) == 4129 ; 0x1021 - CB-21 Set Nictype = 0 set NetBandValue = "3" ; 11a mode set cNetBandValue = 3 endif ifint $(Value_SubSystemID) == 9013 ; 0x2335 - SMC2335W Set Nictype = 1 set NetBandValue = "7" ; Auto mode set cNetBandValue = 7 endif ifint $(Value_SubSystemID) == 8226 ; 0x2022 - MB-22 Set Nictype = 2 set NetBandValue = "7" ; Auto mode set cNetBandValue = 7 endif endif ; now write the driver's wireless mode key ; SetRegValue $(KeyParameters) {"NetBand", 0,$(!REG_VT_SZ),$(NetBandValue)} ; add parameters below the driver list ; set CfgParameters = "CustomParams\Configurations" CreateRegKey $(KeyParameters) {$(CfgParameters),0,GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" MyCfgParmHandle CloseRegKey $(KeyParameters) ifstr $(MyCfgParmHandle) == $(KeyNull) shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" "ConfigParm registry create failed. Could not create key:"$($)" ("$(RegLastError)")" goto successful endif set NewValueList = {{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion, $(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {NicType, $(NoTitle),$(!REG_VT_DWORD),$(Nictype)},+ {SelectedConfigurationIndex,$(NoTitle),$(!REG_VT_DWORD),0},+ {SelectedConfigurationName,$(NoTitle),$(!REG_VT_SZ),$(DefaultConfigName)}} Shell $(UtilityInf), AddValueList, $(MyCfgParmHandle), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." CloseRegKey $(MyCfgParmHandle) goto ShellCodeError endif Set Cfg0Parameters = "Cfg0" CreateRegKey $(MyCfgParmHandle) {$(Cfg0Parameters),0,GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" MyCfg0KeyHandle CloseRegKey $(MyCfgParmHandle) ifstr $(MyCfg0KeyHandle) == $(KeyNull) shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" "Config0Key registry create failed. Could not create key:"$($)" ("$(RegLastError)")" goto successful endif SetRegValue $(MyCfg0KeyHandle) {"ConfigurationName",0,$(!REG_VT_SZ),$(DefaultConfigName)} SetRegValue $(MyCfg0KeyHandle) {"NetBand",0,$(!REG_VT_DWORD),$(cNetBandValue)} CloseRegKey $(MyCfg0KeyHandle) ifint $(DISABLEPCMCIASYS) == 1 set PCMCIAKeyName = $(!NTN_ServiceBase)"\Pcmcia" OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIAKeyName) $(MaximumAllowed) PCMCIAKey SetRegValue $(PCMCIAKey) {Start, 0, $(!REG_VT_DWORD),4} ; '4' disables the driver CloseRegKey $(PCMCIAKey) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryError = $($R0) Ifstr(i) $(RegistryError) != NO_ERROR Debug-Output "Registry error: Add value list" goto fatalregistry endif EndWait ; ---------------------------------------------------------------------------------------------------------- ; add driver info to the SYSTEM\CurrentControlSet\Services\resman\Database\SMC for CardWizard ; ---------------------------------------------------------------------------------------------------------- set CWKey = "SYSTEM\CurrentControlSet\Services\resman" set CWDatabaseKey = $(CWKey)"\Database" set CWManufacturerKey = $(CWDatabaseKey)"\"$(Manufacturer) set CWCardNameKey = $(CWManufacturerKey)"\"$(CardName) Debug-Output "INF Check the presence of CardWizard" OpenRegKey $(!REG_H_LOCAL) "" $(CWKey) $(MaximumAllowed) MyPcmciaHandle Ifstr $(MyPcmciaHandle) == $(KeyNull) goto successful endif Debug-Output "INF Create Registry Keys for CardWizard" OpenRegKey $(!REG_H_LOCAL) "" $(CWCardNameKey) $(MaximumAllowed) MyPcmciaHandle Ifstr $(MyPcmciaHandle) == $(KeyNull) Debug-Output "INF: Create Registry Keys (for CardName)" OpenRegKey $(!REG_H_LOCAL) "" $(CWDatabaseKey) $(MaximumAllowed) MyPcmciaKey CreateRegKey $(MyPcmciaKey) {$(Manufacturer),0,GenericClass} "" $(MaximumAllowed) "" MyPcmcialHandle CloseRegKey $(MyPcmciaKey) OpenRegKey $(!REG_H_LOCAL) "" $(CWManufacturerKey) $(MaximumAllowed) MyPcmciaKey CreateRegKey $(MyPcmciaKey) {$(CardName),0,GenericClass} "" $(MaximumAllowed) "" MyPcmcialHandle CloseRegKey $(MyPcmciaKey) OpenRegKey $(!REG_H_LOCAL) "" $(CWCardNameKey) $(MaximumAllowed) MyPcmciaHandle endif set NewValueList = {{Driver,$(NoTitle),$(!REG_VT_SZ),$(GenericName)}} Shell $(UtilityInf), AddValueList, $(MyPcmciaHandle), $(NewValueList) Debug-Output "<DBG> AddValueList - Driver:REG_SZ:"$(CardName) CloseRegKey $(MyPcmciaHandle) goto successful ;----------------------------------------------- ; Binding section ;----------------------------------------------- bindingadapter =+ Debug-Output "INF - binding not suppported" set Error = "Binding: Sorry, not yet implemented." goto fatal ;----------------------------------------------- ; Removeadapter section ;----------------------------------------------- removeadapter = + Debug-Output "INF - remove adapter" Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) ; Remove Software Component Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryError = $($R0) Ifstr(i) $(RegistryError) != NO_ERROR goto fatalregistry endif else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryError = $($R0) Ifstr(i) $(RegistryError) != NO_ERROR goto fatalregistry endif endif ifint $(DISABLEPCMCIASYS) == 1 set PCMCIAKeyName = $(!NTN_ServiceBase)"\Pcmcia" OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIAKeyName) $(MaximumAllowed) PCMCIAKey SetRegValue $(PCMCIAKey) {Start, 0, $(!REG_VT_DWORD),0} ; '0' restores the driver to "BOOT" CloseRegKey $(PCMCIAKey) endif goto end ;----------------------------------------------- ; Upgrade Software section ;----------------------------------------------- UpgradeSoftware = + ; Update Software\ManufacturerName\ProductName\CurrentVersion and ; install new drivers and INF Debug-Output "INF - upgrade" OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MaximumAllowed) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set !UG_Filename = $($R0) ifstr(i) $(!UG_Filename) != "" install "Install-Update" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif endif SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} CloseRegKey $(KeyProduct) else goto fatalregistry endif goto end successful = + goto end abandon = + Debug-Output "INF adandon" ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryError = $($R0) Ifstr(i) $(RegistryError) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryError = $($R0) Ifstr(i) $(RegistryError) != NO_ERROR goto fatalregistry endif endif goto end warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(From) else goto "end" endif nonfatalinfo = + Set Severity = STATUS Set CommonStatus = STATUS_USERCANCEL goto nonfatalmsg nonfatal = + Set Severity = NONFATAL goto nonfatalmsg nonfatalmsg = + ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(From) else goto "end" endif fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryError) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal fataldetect = + Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) Goto fatal fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) [DebugConfiguration] Set InfName = "OEMSETUP.INF" return [Install-Option] set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers endif ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif Exit [Install-Update] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) AddSectionFilesToCopyList Files-Cpl $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Install-Cpl] set STF_VITAL = "" AddSectionFilesToCopyList Files-Cpl $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Source Media Descriptions] 1 = "SMC Setup Disk for NT" [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 [Files-Inf] 1, OEMSETUP.INF, SIZE=58000, RENAME=$(!UG_Filename) [Files-Cpl] 1, ANTPCIEX.EXE , SIZE=184000 1, ANTPCISY.SYS , SIZE=4000 [Files-ATH] 1, SMC11AB.SYS, SIZE=53000 [LanguagesSupported] ENG [AllFileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" [FileConstantsENG-ATH] FunctionTitle = $(GenericTitleName)" Setup"$(GenericInfVersion) ProductSoftwareTitle = $(GenericDriverName) ProductHardwareTitle = $(GenericAdapterName) [DialogConstantsENG-ATH] Help = "&Help" Exit = "Cancel" OK = "OK" HelpContext = "" Continue = "Continue" Cancel = "Cancel"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.