[pctcp general] host-name = ES1HOST1 domain = ES1DOMAIN full-name = SMC time-zone = PST time-zone-offset = 480 use-old-init-scheme = no [pctcp kernel] interface = ifcust 0 serial-number = xxxx-yyyy-zzzz authentication-key = aaaa-bbbb-cccc window = 2048 low-window = 0 use-emm = no kernel-int = 0x61 ip-ttl = 64 ip-precedence = routine ip-precedence-matching = lax ip-security = none ip-delay = high ip-reliability = low ip-throughput = low large-packets = 5 small-packets = 5 tcp-connections = 6 udp-connections = 6 router-discovery = no mtu-discovery = yes [pctcp ifcust 0] ip-address = 129.254.4.2 subnet-mask = 255.255.255.0 sw-int = 0x60 [pctcp lpr] banner = yes [pctcp idprint printer] when = timeout timer = 30 mine = no number = 0 [pctcp ip-security] basic-classification = unclassified matching = lax [pctcp pd-pctcp] default = ipx [pctcp pd-pctcp ipx] retain-header = 0 protocol = UDP type-port = 0x8137,213 [pctcp netbios] scope = [pctcp tn] ftpsrv = off status = on back-arrow-key = del kerberos4-auth = on kerberos4-only = off [pctcp vt] allow-vt220-8-bit = off 8-bit = off wrap-line = on answerback = FTP [pctcp host] umask = 644 [pctcp wmsg] protocol = UDP save-protocol = yes beep-on-msg = yes [pctcp serial n] port = 1 io-addr = 0x03f8 irq = 4 baud = 2400 hardware-flow-control = off [pctcp comscrpt hostname] dialup = C:\FTP\dialup.scr hangup = C:\FTP\hangup.scr mru = 1500 accm = 0x000A0000 addr-ctrl-field-comp = on prot-field-comp = on local-ip-address = 0.0.0.0 remote-ip-address = 0.0.0.0 [pctcp time] dst-begins = 94 dst-ends = 299 [pctcp install] bindir = C:\FTP etcdir = C:\FTP kernel-name = IEEEDRV.EXE major-version = 2 minor-version = 2 patch-level = 0 do-kappconf = yes configure-driver = yes ini-origin = userDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.