Date: 03-12-99
SMC 9432 PCI Ethernet Driver Ver 1.05 For Mac System 8.5
---------------------------------------------------
This Installation program SMCInstallScript should be run (double-click) to install
the following driver on your system:
1. SMC EtherPower II 10/100 (TX)
2. SMC EtherPower II 10/100 (BTX)
3. SMC EtherPower II 10/100 (TXMP)
The drivers are present in the file "9432 1.05" on the same diskette.
PLEASE DE-INSTALL ANY PREVIOUS VERSION OF THE 9432 DRIVER USING
THE INSTALLATION PROGRAM PROVIDED BY THAT VERSION - DO NOT USE
THIS VERSION TO UNINSTALL A PREVIOUS VERSION !!!!!!!
Note: The Volume Label of your diskette should be 'SMC Drivers' for the
installation program to work !! And ensure that the Installer program
is also present on your diskette !!
The Auto Detection Code has been added, thus both 10 Mbs and 100 Mbs lines
can be used without any change to the driver. Note: make sure you reboot the
system whenever you change the line speed since the driver cannot dynamically
detect change in the line speed. Infact PowerOff the system before you change
the line speed.
NOTE:
These drivers will work ONLY with Ver 1.0.5b4 (or later) of the Open Transport
Runtime Library OR higher. This software can be installed from the "GM DDK Quick
CD Power Macintosh with PCI" CD. Use the "Installer" program residing in the
":Nitro/TNT/Catalyst GM: Open Transport:Open Transport Installer:" directory.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.