1. DR_95x2TX_DRv10_All.zip Driver
2. WIN2000.TXT File Contents

WIN2000.TXT Driver File Contents (DR_95x2TX_DRv10_All.zip)

*******************************************************************************
*                             SMC Networks, Inc                               *
*                             SMC TigerCard 1000                              *
*                      NDIS5 MINIPORT DRIVER INSTALLATION                     *
*                                                                             *
*                  Copyright (C) 2000-2001 SMC Networks, Inc.                 *
*                             All Rights Reserved.                            *
*******************************************************************************


The driver (SMC95X2.SYS) contained in the directory WIN2000 is for the following
SMC PCI Ethernet Adapter:

                 SMC TigerCard 1000

The driver (SMC95X2.SYS) conforms to the Network Driver Interface Specification
(NDIS) 5.0, and is used with Microsoft and Windows Millennium.

Contents :
===============================================================================
(A) Installing the NDIS5 Miniport driver on Microsoft Windows 2000
(B) Configuring the NDIS5 Miniport driver on Microsoft Windows 2000


(A) Installing the NDIS5 Miniport driver on Microsoft Windows 2000
-------------------------------------------------------------------------------

    1. Turn off your computer.   Insert the SMC9562TX/SMC9552TX in one of the
       PCI slots that support the PCI "Bus Master" mode in your machine.
    2. Connecting the RJ45 port of SMC9562TX/SMC9552TX to the network using a UTP cable
       (CAT5 cable for 100/1000Mbps,   CAT3/5 cable for 10Mbps network).
    3. Power on your computer.   Boot from Windows 2000.   Windows 2000
       will find a new 'PCI Ethernet Controller' and display the dialog box.
       Click the "Next" button.
    4. Select "Search for the best driver for your device (Recommended)" in the
       'Add New Hardware Wizard' dialog box.  Click the "Next" button.
    5. Insert the SMC9562TX/SMC9552TX Driver Diskette in your floppy device (e.g. A:\).
    6. Select "Specify a location".   Set driver Path to "A:\WIN2000" in the
       'Add New Hardware Wizard' dialog box.   Click the "Next" button.
    7. Click the "Next" button in the 'Add New Hardware Wizard' dialog box.
    8. Windows 2000 will display
       "SMC TigerCard 1000"
       in the 'Add New Hardware Wizard' dialog box.
    9. Click the "Next" button in the 'Add New Hardware Wizard' dialog box.
       Windows 2000 will copy the driver SMC95X2.SYS from A:\WIN2000
       to the C:\WINNT\SYSTEM directory and the SMC95X2.INF file from
       A:\WIN2000 to the C:\WINNT\INF directory.
   10. When Windows displays
       "SMC TigerCard 1000"
       in the 'Add New Hardware Wizard' dialog box.   Click the "Finish" button.
   11. Remove the SMC9562TX/SMC9552TX driver diskette from your floppy device.
   12. Restart your computer to activate the network function.

       NOTICE!! C:\WINNT is the directory where your Windows 2000
                O.S. is located.

(B) Configuring the NDIS5 Miniport driver on Microsoft Windows 2000
-------------------------------------------------------------------------------

    1. Right click the 'My Network Places' icon in the Main Program Group.
       Select "Properties" from the menu.
    2. Double click the 'Local Area Connection' icon.
       Click on the "Properties" button.
    3. Click the "Configure" button.
    4. Click the "Advanced" tab in the
       'SMC TigerCard 1000 Properties'
       dialog box.
       1). Select "802.1p QOS".
           Select a item (Disable, Enable)
           in the "Value" field (default value is Disable).
       2). Select "Checksum Offload".
           Select a item (None, Rx TCP/IP Checksum, Tx TCP/IP Checksum, Tx/Rx TCP/IP Checksum)
           in the "Value" field (default value is Tx TCP/IP Checksum).
       3). Select "Jumbo Mtu".
           Write a value (1500 - 4000) in the "Value" field (default value is 1500, step value is 500).
       4). Select "Speed & Duplex".
           Select a item (Auto, 10 Mb Half, 10 Mb Full, 100 Mb Half, 100 Mb Full)
           in the "Value" field (default value is Auto).
       5). Select "Wake Up Capabilities".
           Select a item (None, Magic Packet, Wake Up Frame, Both)
           in the "Value" field (default value is Both).
    5. Click the "OK" button in the 'Advanced' tab.
    6. Click the "OK" button in the
       'SMC TigerCard 1000 Properties'
       dialog box.
    7. Restart your computer to activate the new configuration.


Trademarks :
===============================================================================
Microsoft Windows 2000 is a trademark of Microsoft Corporation.