1. DR_95x2TX_DRv10_All.zip Driver
2. WINME.TXT File Contents

WINME.TXT Driver File Contents (DR_95x2TX_DRv10_All.zip)

*******************************************************************************
*                             SMC Networks, Inc                               *
*                             SMC TigerCard 1000                              *
*                      NDIS5 MINIPORT DRIVER INSTALLATION                     *
*                                                                             *
*                  Copyright (C) 2000-2001 SMC Networks, Inc.                 *
*                             All Rights Reserved.                            *
*******************************************************************************


The driver (SMC95X2.SYS) contained in the directory WINME is for the following
SMC PCI Ethernet Adapter:

                 SMC TigerCard 1000

The driver (SMC95X2.SYS) conforms to the Network Driver Interface Specification
(NDIS) 5.0, and is used with Microsoft and Windows Millennium.

Contents :
===============================================================================
(A) Installing the NDIS5 Miniport driver on Microsoft Windows Millennium
(B) Configuring the NDIS5 Miniport driver on Microsoft Windows Millennium


(A) Installing the NDIS5 Miniport driver on Microsoft Windows Millennium
-------------------------------------------------------------------------------

    1. Turn off your computer.   Insert the SMC9562TX/SMC9552TX in one of the
       PCI slots that support the PCI "Bus Master" mode in your machine.
    2. Connecting the RJ45 port of SMC9562TX/SMC9552TX to the network using a UTP cable
       (CAT5 cable for 100M/1000Mbps,   CAT3/5 cable for 10Mbps network).
    3. Power on your computer.   Boot from Windows Millennium,
       Windows Millennium will find a new 'PCI Ethernet Controller' and
       display the dialog box.   Click "Next" button.
    4. Select "Search for the best driver for your device (Recommended)" in the
       'Add New Hardware Wizard' dialog box.   Click the "Next" button.
    5. Insert the SMC9562TX/SMC9552TX Driver Diskette in your floppy device.
    6. Select "Specify a location",   then set driver Path is "A:\WINME" in the
       'Add New Hardware Wizard' dialog box.   Click the "Next" button.
    7. Click the "Next" button in the 'Add New Hardware Wizard' dialog box.
    8. Windows Millennium will display
       "SMC TigerCard 1000"
       in the 'Add New Hardware Wizard' dialog box.
    9. Click the "Next" button in the 'Add New Hardware Wizard' dialog box.
       Windows Millennium will copy the driver SMC95X2.SYS from A:\WINME
       to the C:\WINDOWS\SYSTEM directory and the SMC95X2.INF file from
       A:\WINME to the C:\WINDOWS\INF directory.
   10. When Windows displays
       "SMC TigerCard 1000"
       in the 'Add New Hardware Wizard' dialog box,   click the "Finish" button.
   11. Remove the SMC9562TX/SMC9552TX Driver Diskette from your floppy device.
   12. Restart your computer to initialize the network function.

       NOTICE!! C:\WINDOWS is the directory where your Windows Millennium
                O.S. is located.

(B) Configuring the NDIS5 Miniport driver on Microsoft Windows Millennium
-------------------------------------------------------------------------------

    1. Double click the 'My Computer' icon in the Main Program Group.
    2. Double click the 'Control Panel' icon in the My Computer window.
    3. Double click the 'Network' icon in the Control Panel window.
    4. Select the
       "SMC TigerCard 1000"
       item from the 'Network' dialog box,   then click the "Properties" button.
    5. Click the "Advanced" tab in the
       'SMC TigerCard 1000 Properties'
       dialog box.
       1). Select "802.1p QOS".
           Select a item (Disable, Enable)
           in the "Value" field (default value is Disable).
       2). Select "Checksum Offload".
           Select a item (None, Rx TCP/IP Checksum, Tx TCP/IP Checksum, Tx/Rx TCP/IP Checksum)
           in the "Value" field (default value is Tx TCP/IP Checksum).
       3). Select "Jumbo Mtu".
           Write a value (1500 - 4000) in the "Value" field (default value is 1500, step value is 500).
       4). Select "Speed & Duplex".
           Select a item (Auto, 10 Mb Half, 10 Mb Full, 100 Mb Half, 100 Mb Full)
           in the "Value" field (default value is Auto).
       5). Select "Wake Up Capabilities".
           Select a item (None, Magic Packet, Wake Up Frame, Both)
           in the "Value" field (default value is Both).
    6. Click the "OK" button in the 'Advanced' tab.
    7. Click the "OK" button in the 'Network' dialog box.
    8. Restart your computer to activate the new configuration.

Trademarks :
===============================================================================
Microsoft Windows Millennium is a trademark of Microsoft Corporation.