SMC Networks, Inc.
SMC 10/100 PC Card (SMC8041 V.2)
Windows NT 4.0 Installation
Windows NT 4.0 provides support for PCMCIA adapters.
Before installing your SMC8041 V.2 adapter, please make sure
the PCMCIA device is started and working. You can check
the status of the PCMCIA device by double clicking the "Devices"
icon in the Control Panel. If the PCMCIA device is not
started, you can click the "Start" button to start it.
Windows NT 4.0 Driver Installation Steps:
1) Insert SMC8041 V.2 in one of the PCMCIA Slots.
2) Start Windows NT 4.0.
3) Double click the "Control Panel/Network" icon. Select
"Adapter", and click the "Add" button. Insert the SMC8041 V.2
driver diskette in the floppy drive (e.g. A:) and click the
"Have Disk" button.
4) Enter "A:\winnt" and click the OK button.
5) Select the "SMC 10/100 PC Card (SMC8041 V.2)" from the
dialog box and click OK to continue.
6) Select IRQ, I/O address and Connection Type, and click OK.
The system will copy the driver files to the hard disk.
7) The installation prompts you for the required TCP/IP setup
information. Please enter all the required information.
8) Restart the computer.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.