1. DR_SMC8041TXV2_DRv101.zip Driver
2. WFW.TXT File Contents

WFW.TXT Driver File Contents (DR_SMC8041TXV2_DRv101.zip)

                            SMC Networks, Inc.              
                      SMC 10/100 PC Card (SMC8041 V.2)
           NDIS Driver for Windows for Workgroups Installation

The driver SMC80412.DOS contained in directory \NDIS\DOS is used with the
SMC 10/100 PC Card (SMC8041 V.2) in the 
Windows for Workgroups environment.

This driver conforms to the Network Driver Interface Specification
(NDIS) 2.0 defined by Microsoft/3Com.



1. INSTALLATION PROCEDURE

   a. Select the "Network" icon in Main group in Windows environment.

   b. Select the "Network Setup" icon.

   c. Push <Drivers...>  Pushbutton in the "Network Setup" dialog.

   d. push the <Add Adapter...> button.

   e. Select "Unlisted or Updated Network Adapter". Then push <OK> Button.
      "Install driver" appears.

   f. Type in the drive and path name where the NDIS driver resides (e.g.
      A:\ndis\DOS or B:\ndis\DOS).

   g. Insert the Driver Diskette in the specified drive.

   h. Press <OK>.

   i. Press <close>.

   j. Press <OK> twice.	
   	
   k. Restart the computer.

Notes: 
   To use SMC 10/100 PC Card (SMC8041 V.2)'s NDIS2 DOS driver, you have to run the 
   SMC 10/100 PC Card (SMC8041 V.2)'s Enabler SMCOPEN.EXE in you CONFIG.SYS 
   before the network start, like the following:
   DEVICE=C:\windows\SMCOPEN.exe
   

2. Sample config.sys file

   FILES=30
   buffers=30
   STACKS=9,256
   DEVICE=c:\windows\HIMEM.sys
   DEVICE=c:\windows\emm386.exe noems x=d000-dfff
   DEVICE=c:\windows\SMCOPEN.exe 
   DEVICE=c:\windows\ifshlp.sys
   LASTDRIVE=y

3. Sample protocol.ini file for Windows for Workgroups

   [network.setup]
   version=0x3100
   netcard=SMC80412,1,SMC80412
   transport=ms$netbeui,MS$NETBEUI
   lana0=SMC80412,1,ms$netbeui

   [protman]
   DriverName=PROTMAN$
   PRIORITY=MS$NETBEUI

   [SMC80412]
   DriverName=SMC80412$

   [MS$NETBEUI]
   DriverName=netbeui$
   SESSIONS=10
   NCBS=32
   BINDINGS=SMC80412
   LANABASE=0

4. Sample autoexec.bat file

   
   C:\WINDOWS\net start
   C:\WINDOWS\SMARTDRV.EXE
   @ECHO OFF
   PROMPT $p$g
   PATH C:\WINDOWS;
   SET TEMP=C:\WINDOWS\TEMP

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.