SMC Networks Inc. SMC EZ Card 10 Ethernet PCI Network Cards Netware Client32 Driver For Ethernet LAN Cards INSTALLATION GUIDE This software is licensed by SMC for use by its customers only. Copyright (c) 1998 SMC Networks Inc. All rights reserved. SUPPORTED NETWORK CARDS SMC's EZ Card 10 Ethernet PCI Network Cards: o SMC1208T o SMC1208BT o SMC1208BTA Contents: A. File Description B. Driver Installation for DOS32 C. Driver Installation for Microsoft Windows 3.x D. Driver Installation for Microsoft Windows 95 A. File Description -------------------- ------------------------------------------------------------------------------- Filename Description ------------------------------------------------------------------------------- README.TXT This file. Presents a summary of the contents for Netware Client32 driver installation. SMC1208.LAN Client32 ODI driver for SMC 10Mbps PCI Bus Ethernet Adapter. This driver complies with Netware ODI Server driver SPEC 3.3. SMC1208.LDI The driver (SMC1208.LAN) installation information file for Netware Server 4.11, DOS32, Microsoft Windows 3.x. MSC1208.INF The driver (SMC1208.LAN) installation information file for Microsoft Windows 95. ------------------------------------------------------------------------------- B. Driver Installation for DOS32 1. If you have completed installed the Netware Client 32 for DOS, all you have to do is to modify STARTNET.BAT. Please see the sample STARTNET.BAT below. If not, Please follow the step 2 - step 7 shown below. Sample STARTNET.BAT is as follow: SET NWLANGUAGE=English C:\NOVELL\CLIENT32\NIOS.EXE LOAD C:\NOVELL\CLIENT32\LSLC32.NLM LOAD C:\NOVELL\CLIENT32\CMSM.NLM LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM LOAD C:\NOVELL\CLIENT32\SMC1208.LAN FRAME=ETHERNET_802.2 LOAD C:\NOVELL\CLIENT32\SMC1208.LAN FRAME=Ethernet_802.3 LOAD C:\NOVELL\CLIENT32\SMC1208.LAN FRAME=Ethernet_II LOAD C:\NOVELL\CLIENT32\SMC1208.LAN FRAME=Ethernet_SNAP LOAD C:\NOVELL\CLIENT32\IPX.NLM LOAD C:\NOVELL\CLIENT32\CLIENT32.NLM C: 2. Run INSTALL.EXE from Netware DOS 32 diskette 1 (or from Netware 4.11 CD). When the product manual appears, mark the "Netware Client 32 for DOS" item, then press <Enter>. 3. Select "OTHER DRIVERS" item from "32-bit Network Board Drivers" menu, then press <Enter>. 4. Select "USER SPECIFIED 32 BIT DRIVER." Then press <Enter>. 5. Insert SMC 10Mbps PCI Bus Ethernet Adapter Driver Diskette into your floppy diskette drive, then specify the driver path like A: or B:. 6. Follow the instructions to complete the Client32 for DOS software installation. 7. Reboot your machine. C. Driver Installation for Microsoft Windows 3.x Please refer to Content B. In step 2, mark "Netware Client 32 for DOS" and "Client 32 for Windows"; in step 5, specify the driver path like A:\NWCLIENT\CLIENT32, then follow step 3..7 to complete installation. D. Driver Installation for Microsoft Windows 95 If you have installed the Microsoft Client in your Windows 95 system, you should remove the adapter object and NDIS 2/3 driver of the adapter from the Windows 95 system. If you have previously installed an SMC 10Mbps PCI Bus Ethernet Adapter NDIS 2/3 driver,you should take the following steps before installing the SMC 10Mbps PCI Bus Ethernet Adapter Client32 driver. D.1 Remove the previously installed adapter object & driver for the SMC 10Mbps PCI Bus Ethernet Adapter, if any. ============================================================== 1. Click the "My Computer" icon in the Main Program Group. 2. Click the "Control Panel" icon from My Computer window. 3. Click the "System" icon in the Control Panel window. 4. Click the "Network adapter" icon in the System window. 5. Click the "SMC EZ Card 10 PCI (SMC1208)" icon in the System window. 6. Click the <Remove> button, then click the <OK> button. 7. Close the opened windows. D.2 Client 32 Driver Installation on Windows 95 =============================================== 8. Plug the SMC 10Mbps PCI Bus Ethernet adapter into one of the PCI slots of your PC machine. 9. Turn the power on to boot up Windows 95. 10. Windows 95 will then prompt with "SMC EZ Card 10 PCI (SMC1208)" in New Hardware Found dialog box. 11. Follow the instructions to complete installation. Note: Windows 95 will ask you to key in the proper path for the following diskette: a. Netware Client 32 for Windows 95 Disk, b. PCI-Bus Ethernet Adapter Driver Diskette --> Insert Driver Diskette, then, assign the path to A:\NWCLIENT\CLIENT32 c. Windows 95 CD-ROM -- End of File --Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.