SMC EZ Card 10/100 (SMC1255FTX-SC)
Windows NDIS5/5.1 Driver Installation
Contents:
---------
(A-1) Installing the driver on Microsoft Windows 98
(A-2) Configuring the driver on Microsoft Windows 98
(B-1) Installing the driver on Microsoft Windows Me
(B-2) Configuring the driver on Microsoft Windows Me
(C-1) Installing the driver on Microsoft Windows 2000
(C-2) Configuring the driver on Microsoft Windows 2000
(D-1) Installing the driver on Microsoft Windows XP
(D-2) Configuring the driver on Microsoft Windows XP
(A-1) Installing the driver on Microsoft Windows 98
================================================================
Notice: The Windows 98 or Windows 98 SE installation CD are
needed to complete this installation.
1. Make sure your computer is power-off.
2. Plug the adapter into one of the PCI slots of your PC.
3. Turn on the power, then boot into Windows 98.
4. Windows 98 will find the new hardware automatically,
then "Add New Hardware Wizard" box will appear.
Click the "Next" button.
5. Select "Search for the best driver for your device
(Recommended)", then click "Next" button.
6. Insert the driver disk in your PC's drive.
7. Select "Specify a location" and type "X:" in the
drop-down box.
Notice: X: means the Floppy drive or CD-ROM drive,
such as: A:, or E: etc.
Then, click "Next" button.
8. Windows 98 will prompt with "SMC EZ Card 10/100
(SMC1255FTX-SC)" in the window, notifying you that
it is ready to install the driver, click "Next" button.
9. Windows 98 will copy the drivers to your PC.
Notice: During this copying procedure, Windows 98 may
request for your Windows 98 installation CD.
10. When Windows prompts with "SMC EZ Card 10/100
(SMC1255FTX-SC)" in the window, notifying you that
it has finished installing the driver, click the
"Finish" button.
11. Remove the Driver Diskette.
12. Restart your computer to initialize the network function.
(A-2) Configuring the driver on Microsoft Windows 98
================================================================
1. Double Click "My Computer" icon.
2. Double Click "Control Panel" icon.
3. Double Click the "Network" icon.
4. Select the "SMC EZ Card 10/100 (SMC1255FTX-SC)" from the
"Network" dialog box, then click the "Properties" button.
5. Click "Advanced" tab.
6. There are 9 items in the "Property" box.
------Media Type
------PME Enable
------Wake On Ping
------Link Wakeup (Off->On)
------Link Wakeup (On->Off)
------Magic Packet Wakeup
------Flow Control
------Priority Packet
------VLAN ID
7. Click "OK" button to return to "Network" dialog box.
8. Click "OK" button and restart your PC to make the new
configuration takes effect.
(B-1) Installing the driver on Microsoft Windows Me
================================================================
1. Make sure your computer is power-off.
2. Plug the adapter into one of the PCI slots of your PC.
3. Turn on the power, then boot into Windows Me.
4. Windows Me will find the new hardware automatically,
then "Add New Hardware Wizard" box will appear.
5. Insert the driver disk in your PC's drive.
6. Select "Specify the location of the driver (Advanced)",
then click "Next" button.
7. Select "Search for the best driver for your device
(Recommended)" and select "Specify a location".
8. Type "X:" in the drop-down box and click "Next" button.
Notice: X: means the Floppy drive or CD-ROM drive,
such as: A:, or E: etc.
9. When Windows Me open a window, notifying you it is ready
to install the driver, click "Next" button.
10. After this is completed, Windows Me will prompt with
"SMC EZ Card 10/100 (SMC1255FTX-SC)" in the window,
notifying you it has finished installing the driver.
11. Remove the driver disk and click "Finish" button to
complete the installation.
12. Restart your computer to initialize the network function.
(B-2) Configuring the driver on Microsoft Windows Me
================================================================
1. Double Click "My Computer" icon.
2. Double Click "Control Panel" icon.
3. Double Click the "Network" icon.
4. Select the "SMC EZ Card 10/100 (SMC1255FTX-SC)" from the
"Network" dialog box, then click the "Properties" button.
5. Click "Advanced" tab.
6. There are 9 items in the "Property" box.
------Media Type
------PME Enable
------Wake On Ping
------Link Wakeup (Off->On)
------Link Wakeup (On->Off)
------Magic Packet Wakeup
------Flow Control
------Priority Packet
------VLAN ID
7. Click "OK" button to return to "Network" dialog box.
8. Click "OK" button and restart your PC to make the new
configuration takes effect.
(C-1) Installing the driver on Microsoft Windows 2000
================================================================
1. Make sure your computer is power-off.
2. Plug the adapter into one of the PCI slots of your PC.
3. Turn on the power, then boot into Windows 2000.
4. Windows 2000 will find the new hardware automatically,
then "Found New Hardware Wizard" box will appear.
5. Insert the Driver Diskette and click "Next" button.
6. Select "Search for a suitable driver for my device
(Recommended)", then click "Next".
7. Select "Specify a location" and click the "Next" button.
8. Type "X:" in the "Copy manufacturer's file from" field.
Then click "OK".
Notice: X: means the Floppy drive or CD-ROM drive,
such as: A:, or E: etc.
9. Click the "Next" button in the "Driver File Search Results"
dialog box.
10. When "Completing the Found New Hardware Wizard" dialog box
appears, click the "Finish" button to complete installation.
11. Remove the Driver Diskette.
(C-2) Configuring the driver on Microsoft Windows 2000
================================================================
1. Double click the "My Computer" icon.
2. Double click the "Control Panel" icon.
3. Double Click the "System" icon.
4. Select the "Hardware" tab from the "System Properties"
dialog box.
5. Click the "Device Manager" button.
6. Double click "SMC EZ Card 10/100 (SMC1255FTX-SC)" from
"Network adapters" item.
7. Select "Advanced" tab in the dialog box.
8. There are 9 items in the "Property" box.
------Media Type
------PME Enable
------Wake On Ping
------Link Wakeup (Off->On)
------Link Wakeup (On->Off)
------Magic Packet Wakeup
------Flow Control
------Priority Packet
------VLAN ID
9. After modifying the configuration, click the "OK" button
make the new configuration take effect.
(D-1) Installing the driver on Microsoft Windows XP
================================================================
1. Make sure your computer is power-off.
2. Plug the adapter into one of the PCI slots of your PC.
3. Turn the power ON, then boot into Windows XP.
4. Windows XP will find the new hardware automatically,
then "Found New Hardware Wizard" dialog box will appear.
5. Insert the driver disk in your PC's drive, and select
"Install the software automatically (Recommended)",
then click "Next" button.
6. Windows XP will find the best driver on the driver disk
and copy required files. After this is completed,
Windows XP will prompt with "SMC EZ Card 10/100
(SMC1255FTX-SC)" in the dialog box.
7. Remove the Driver Diskette and click "Finish" button to
complete the installation.
(D-2) Configuring the driver on Microsoft Windows XP
================================================================
1. Open the "Control Panel" from "Start" Menu.
2. Click the "Control Panel".
3. Click "Network and Internet Connections".
4. Click "Network Connections".
5. Right click the "Local Area Connection" icon with the
name "SMC EZ Card 10/100 (SMC1255FTX-SC)".
6. Click "Properties" in the pull-down menu.
7. Click "Config" button in the dialog box.
8. Click "Advanced" tab in the dialog box.
9. There are 9 items in the "Property" box.
------Media Type
------PME Enable
------Wake On Ping
------Link Wakeup (Off->On)
------Link Wakeup (On->Off)
------Magic Packet Wakeup
------Flow Control
------Priority Packet
------VLAN ID
10. After modifying the configuration, click the "OK" button
make the new configuration take effect.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.