************************************************************************* * SMC Networks, INC * Barricade Broadband Router * SMC7904WBRA2 * FIRMWARE version V0.15a * 22/09/2006 ************************************************************************* This document contains two sections: A) The upgrade procedure B) The firmware release history for SMC7904WBRA2 c) Known issue's ========================================================================= Section A: Upgrade Procedure ========================================================================= 1. Turn on the Barricade and plug it into your network adapter using port 1. 2. Connect to the Web user interface by typing the Barricade's IP Address (ex: 192.168.2.1) in your browser. You will then be prompted to enter your password (default: smcadmin) to logon to the Barricade. 3. Click on the "Tools" link, then click the "Update Firmware" option. The "Update Firmware" screen will appear. 4. Click the "Browse" button and point it to the location of the firmware file (FW_SMC7904WBRA2_v015A.bin). 5. Next click "Apply" button and follow the prompts to begin the upgrade. You will see the message "Processing, please wait" and a percentage bar count up to 100%. When the upgrade is complete the Barricade will reboot. 6. Your Barricade has now been successfully upgraded. Note: It is recommended to make a note of your configuration settings before performing the upgrade. ========================================================================= Section B: Firmware History ========================================================================= v0.15a - Change WMM default value to “DISABLE”. - Add message to inform user that WMM and WDS can’t be enabled at the same time. - Fix bug -> WEP over WDS is not working. - Fix bug -> When running multiplayer game, system will reboot. - Fix bug -> SSL port is permit, when SSL is not supported in the system. - Fix Bug -> Upgrade firmware from telnet will fail. - Fix Bug -> When click on SNMP menu, QOS menu will disappear. v0.13a - Fix bug 'Current password' field is ignored when changing System password - Fix VLAN bug - Fix remote telnet security bug v0.09a - Fix bug default password keeps working after being changed - Enable SNMP management for LAN only & add options: LAN only, WAN only, LAN + WAN - Modify LAN page v0.06 - First official release ========================================================================= Section C: Known issue's ========================================================================= v0.09 - WDS cannot work when WMM (WiFi Multimedia is enabled). Workaround is to disable WMM.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.