1. FW_SMCWBR14_G2v2_v108_FCC.zip Driver
2. RN_SMCWBR14_G2v2_v108_FCC.txt File Contents

RN_SMCWBR14_G2v2_v108_FCC.txt Driver File Contents (FW_SMCWBR14_G2v2_v108_FCC.zip)

*************************************************************************
*			    SMC Networks, INC 				*
*	    	 Barricade™ g Wireless Broadband Router			*
*			   SMCWBR14-G2 (V.2)				*
*			  FIRMWARE version v1.08	    		*
*				01/11/2006				*
*************************************************************************
This document contains three sections:

A) Supported part numbers
B) The upgrade procedure
C) The release history for SMCWBR14-G2 (v.2)

=========================================================================
Section A: Supported part numbers
=========================================================================
This firmware supports products with the following part numbers:

752.8607


The part number is printed on the label on the bottom of the unit. If your products part number is not listed above do NOT use this firmware. To download the correct firmware check the support section of our website making sure to select the correct part number.
=========================================================================
Section B: Upgrade Procedure
=========================================================================

1.  Turn on the Barricade and plug it into your network adapter using port 1.

2.  Connect to the Web user interface by typing the Barricade's IP Address (ex: 192.168.2.1) in your browser. You will then be prompted to enter your password (default: smcadmin) to logon to the Barricade.

3.  Click on the "Advanced Settings" menu option, then click on "Maintenance" and then "Firmware Upgrade". The "Firmware Upgrade" screen will appear.

4.  Click the "Browse" button and point it to the location of the firmware file. 

5.  Next click the "Begin Upgrade" button and follow the prompts. You will see the message "Processing, please wait" and a percentage bar count up to 100%. When the upgrade is complete the Barricade will reboot.

6.  Your Barricade has now been successfully upgraded.  

Note: It is recommended that once you upgrade your router with this f/w you reset the unit to factory defaults.

=========================================================================
Section C: Firmware History
=========================================================================
v1.08
- Fixed problem with WLAN Led functionality. Not working properly.

v1.07
- Fixed PPPoE connection failure cause by improper PPPoE negotiation.

v1.06
- Fixed IPSec passthrough not working.
- Fixed security issue.

v1.05
- Fixed WDS not working with WPA/WPA2.
- Fixed Remote Management not working. 
- Fixed SIP passthrough not working. 
- Fixed PPTP Keep-session issue, routing losing pptp connection every few minutes.  

v1.04
- Fixed LAN Setting problem that makes the router crash.

v1.03
- Fixed UPnP issue "Can't browse to WEB UI directly by clicking the diagram under the PC taskbar."
- Fixed Routing with RIP.
- Fixed bug "Cannot add an access control rule for 1 pc".
- Fixed bug in Access Control (Firewall) "No error message when typing several times the same 
	port range".
- Fixed "Wireless/802.1X: The secret Key only accept 23 characters, 
        it should accept 64 characters length. (WiFi WPA2 Spec.)".
- Fixed MTU bug "MTU:If the LAN client is sending data (in my case pings) with the DF (Don’t   fragment) bit set with size from MTU value-27 to 1472, the DUT requests are timing out.
- Fixed bug "LAN setting/DHCP server ID:If the text contain " , the characters after " will disappear."


v1.02
- Fixes DNS Proxy makes device reboot (The DUT Will reboot when playing some PC games).

v1.01
- Fixes PPPoE reconnect issue if PPPoE server does not send PADT packet
		
v1.00 
- First shipping release