RN_SMCWBR14_G2_FCC_v109.txt Driver File Contents (FW_SMCWBR14-G2_FCC_v1.09.zip)

*************************************************************************
*			    SMC Networks, INC 				*
*	    	 Barricade™ g Wireless Broadband Router			*
*			      SMCWBR14-G2  				*
*			  FIRMWARE version v1.09	    		*
*				02/02/2007				*
*************************************************************************
This document contains three sections:

A) Supported part numbers
B) The upgrade procedure
C) The release history for SMCWBR14-G2

=========================================================================
Section A: Supported part numbers
=========================================================================
This firmware supports products with the following part numbers:

751.8265
751.8266

The part number is printed on the label on the bottom of the unit. If your products part number is not listed above do NOT use this firmware. To download the correct firmware check the support section of our website making sure to select the correct part number.
=========================================================================
Section B: Upgrade Procedure
=========================================================================

1.  Turn on the Barricade and plug it into your network adapter using port 1.

2.  Connect to the Web user interface by typing the Barricade's IP Address (ex: 192.168.2.1) in your browser. You will then be prompted to enter your password (default: smcadmin) to logon to the Barricade.

3.  Click on the "Advanced Settings" menu option, then click on "Maintenance" and then "Firmware Upgrade". The "Firmware Upgrade" screen will appear.

4.  Click the "Browse" button and point it to the location of the firmware file. 

5.  Next click the "Begin Upgrade" button and follow the prompts. You will see the message "Processing, please wait" and a percentage bar count up to 100%. When the upgrade is complete the Barricade will reboot.

6.  Your Barricade has now been successfully upgraded.  

Note: It is recommended that once you upgrade your router with this f/w you reset the unit to factory defaults.

=========================================================================
Section C: Firmware History
=========================================================================
v1.09
- Fixed backdoor security bug

v1.08
- Fixed Bug: WDS not working after power cycle.
- Fixed Bug: Remote management not working.
- Fixed Bug: SIP passthrough not working.

v1.07
- Fixed Bug: Remote management is not working with port other than 8080 when Firewall/SPI Enabled.

V1.06
- Fixed DNS Proxy makes device to reboot (The DUT Will reboot when playing some PC game)

V1.05
- Fixed PPPoE reconnect issue if PPPoE server does not send PADT packet

V1.04
- Disabled IGMP to fix flooding of IGMP responses in the WAN

V1.03
- Fixed PPTP connection manager disconnect problem

V1.02
- Fixed lock up issue
- Improved WAN performance

V1.00
- First shipping firmware
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 3.68