*************************************************************************
* SMC Networks, INC *
* Barricade Broadband Router *
* SMCBR14T-G *
* FIRMWARE version V1.07 *
* 19/Sept/2005 *
*************************************************************************
This document contains three sections:
A) The upgrade procedure
B) The release history for SMCBR14T-G
=========================================================================
Section A: Upgrade Procedure
=========================================================================
1. Turn on the router and plug it into your network adapter using LAN port 1 through 4 on the router.
2. Connect to the Web user interface by typing the Barricade's IP Address (ex: 192.168.2.1)in your
browser, then click the login button (if you have not already set a password - otherwise
enter in the correct password)
3. Click on the "Advanced" link, then click on "Maintance" and then "Firmware Upgrade" option. The "Firmware Upgrade" screen will appear.
4. Click the "Browse" button and point it to the location of the firmware file.
5. Next click the "Apply" button and follow the prompts. You will notice the lights on the Barricade
will react in a certain sequence. Wait patiently while the Barricade reboots itself.
6. Your SMCBR14T-G has now been successfully upgraded.
Note: It is recommended that once you upgrade your router with this f/w you reset the unit to factory defaults.
=========================================================================
Section B: Firmware History
=========================================================================
V1.07 .WDS Scan display issue
.Help Screeshots up to date
.Status pages displays Connected if WAN is connected
.DHCP Client in the WAN issue
.Password is not asked after any change in config
.PPPoE LED only working in PPPoE mode
.WLAN LED flashing
.NAT: TCP/UDP port ranges check
V1.06 .Fixed MTU issue, MTU is 1492 by default.
v1.05 .shipping version
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.