NT MS Client Driver Installation (Revised 5/2/97)
Copyright 1997 Compaq Computer Corp. All rights reserved.
-----------------------------------------------------------------
-----------------------------------------------------------------
The driver and its support files for NT MS Client are as follows:
File Name Description
NETFLX3.DOS NDIS 2 driver for Windows NT
DOS client
OEMSETUP.INF Driver installation file
Before installing:
- Locate the Windows NT installation media (CD-ROM or
diskettes).
- Make a copy of the Compaq driver diskette; store the
original and install from the copy.
Installing the driver:
1. Insert the Windows NT installation media and start the SETUP
program:
- If you have the installation CD-ROM, change to the
CLIENTS directory and type SETUP (such as
"D:\CLIENTS\SETUP").
- If you have the installation diskettes, insert Disk 1,
enter the correct drive letter, and type SETUP (such as
"A:\SETUP").
2. When the welcome screen displays, press <Enter>.
3. When prompted to specify where the files will be placed on
the workstation, enter the path and press <Enter>.
4. When prompted to select an adapter, choose Network adapter
not shown on list below and press <Enter>.
5. When prompted to specify the location of the driver, insert
Compaq diskette #1, enter the path A:, and press <Enter>.
6. When prompted to select an adapter from the list, choose
your Compaq controller and press <Enter>.
7. When prompted, provide a User Name and press <Enter>.
8. The next screen shows the name and setup options selected
for the controller. Choose Modify your adapter and protocols
with this option and press <Enter>.
9. The next screen prompts you for the protocol to use on your
network. Choose the correct protocol(s) and press <Enter>.
10. Review the protocol options that you chose for your adapter.
If correct, choose Network configuration is correct and
press <Enter>.
11. The installation is complete. Reboot the workstation to put
the changes into effect.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.